1. Example

2. Outline How to get live stream How to set audio on/off How to get schedule logs How to query events How to get metadata logs How to get DI status How to get DO status How to control DO How to get PTZ preset list How to execute preset go/clear How to execute preset set

3. Outline(cont) How to get patrol setting How to add preset to patrol group How to delete preset from patrol group How to change patrol group name How to change patrol period time How to active patrol group How to start/stop patrol How to get live metadata How to logout live view

4. Outline(cont) How to use playback How to export video How to take snapshot How to connect to Titan How to get event notification How to send audio to camera How to backup data Note

5. Step 1 : create handle and get device list (as login) How to get live stream 1 2 3 4

6. How to get live stream (cont) After create handle and get device list

7. How to get live stream (cont) Step 2. Create player and get sensor profile 65 7

8. How to get live stream (cont) Step 3. Select profile and attach session 8 9

9. How to get live stream (cont) After select profile and attach session

10. How to get live stream (cont) You can connect/disconnect multiple cameras by push Attachsession/Detachsession button.

11. How to set audio on/off Audio Off: Enter camera ID and push “SetAudioOff” button. 1 2

12. How to get schedule logs Step1. Create MainConsolePlayback handle and Get record date list

13. How to get schedule logs Step2. Enter query date and get schedule logs 1 2

14. How to get schedule logs After enter query date and get schedule logs

15. How to query events Create MainConsolePlayback handle, enter query criteria, and push “QueryEvents” button. 1 2

16. How to query events After push “QueryEvents” button

17. How to get Metadata Logs Create MainConsolePlayback handle and push “GetMetadataSourceList” button. 2 1

18. How to get Metadata Logs After push “GetMetadataSourceList” button

19. How to get Metadata logs Enter criteria and push “GetMetadataList” button 2 1 3

20. How to get Metadata logs The results show on the right log field

21. How to get DI Status Enter DI device id after create MainConsoleLiveview handle 1 2

22. How to get DI Status DI status

23. How to get DI Status DI status

24. How to get DO Status Enter DO device id after create MainConsoleLiveview handle 1 2

25. How to get DO Status DO status

26. How to control DO Control Digital output 1 2 3

27. How to Get PTZ Preset List Enter PTZ device id after get liveview streaming 1 2

28. How to Get PTZ Preset List After get PTZ preset list

29. How to Execute Preset GO/Clear Preset go 2 3 1

30. How to Execute Preset GO/Clear Preset clear 2 3 1

31. How to Execute Preset Set Preset Set 1 3 2

32. How to Get Patrol Setting Show Patrol 1 2

33. How to Get Patrol Setting After Show Patrol

34. How to Add Preset to Patrol Group Enter preset number and select group number 2 4 5 3 1

35. How to Delete Preset from Patrol Group Select a group number and a preset 2 5 34 1

36. How to Change Patrol Group Name Select a group number and enter the new name 2 4 3 1

37. How to Change Patrol Period Time Select a group number and enter the new time 2 4 3 1

38. How to Active Patrol Group Select a group number and click “Active” 2 4 3 1

39. How to Get Live Metadata Create MainConsoleLiveview handle and push “SubscreibeMetadata” button 1 2

40. How to Get Live Metadata Start to receive live metadata

41. How to logout liveview Detach sessions and destroy player 2 3 1

42. How to logout liveview(cont) Destroy the handle

43. How to use playback Step 1 : create handle and get device list 1 2 3 4

44. How to use playback (cont) After create handle and get device list

45. How to use playback (cont) Get record date list

46. How to use playback (cont) After get record date list

47. How to use playback (cont) Get record logs 1 2

48. How to use playback (cont) After get record logs

49. How to use playback (cont) Step 2. Create player and attach session 2 1 3

50. How to use playback (cont) Step 3. Select time period in the record logs and open record 1 2 3

51. How to use playback (cont) After click “Play” button 13

52. How to export video Follow the steps of How to use playback, until the “Play” button is enabled.How to use playback 0

53. How to export video(cont) Make sure the time, exclude audio, profile, path are all correct, and then click “Export”. 1 4 5 3 2

54. How to export video(cont) After pressed “Export”, check progress and wait for complete, or press “StopExport” to cancel it. 1 2

55. How to take snapshot Follow How to get live stream or How to use playback to get video shown.How to get live streamHow to use playback

56. How to take snapshot Switch to “General” tab, check the save path, and then click “SnapShot”. 1 2 3

57. How to connect to Titan Make sure you choose “Corporate”, and then create handle and get device list, 1 2 3 4

58. How to connect to Titan(cont) And then you can do all the operations as connect to MainConsole, except: – You can use both live view and playback after create the same handle. – Get schedule log is not supported. – Need to specify range before get record date list.(see next slide)

59. How to connect to Titan(cont) Set date before you get record date list, say 2011/12/1 1 2

60. How to connect to Titan(cont) After get record date list, only results from 2011/12/01 to 2011/12/31 will be queried. 1 2

61. How to get event notification Enable event notification on your server.

62. How to get event notification Create handle and push SubscribeEvent button. 1 2

63. How to get event notification Start to receive event.

64. How to send audio to camera Create MainConsoleLiveview handle and get device list. 1 2

65. How to send audio to camera Go to Liveview page and set camera device id. 1 2

66. How to send audio to camera Press EnableTalk button and start to send system input audio.

67. How to Backup Data Create “MainConsolePlayback” handle and get the device list 1 2

68. How to Backup Data Go to “Backup” page, and add backup camera id. 1 2

69. How to Backup Data Make sure path, time, and included logs are all correct, and then click “InitialBackup” button. 2 1

70. How to Backup Data Make sure path, time, and included logs are all correct, and then click “InitialBackup” button. 2 1

71. How to Backup Data Click Start Backup and wait backup complete. 1

72. Note Please install the vcredist_x86 before start using SDK and Tester. Please enable desktop experience, if your operating system is windows 2008 R2 and above.