1. 8 th Annual Sucker Rod Pumping Workshop Renaissance Hotel, Oklahoma City, Oklahoma September 25 – 28, 2012 Focus on Sucker Rod Pumping Technology, Information, Automation, Case Histories, Experiences

2. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 2 Copyright Rights to this presentation are owned by the company(ies) and/or author(s) listed on the title page. By submitting this presentation to the Sucker Rod Pumping Workshop, they grant to the Workshop, the Artificial Lift Research and Development Council (ALRDC), and the Southwestern Petroleum Short Course (SWPSC), rights to: –Display the presentation at the Workshop. –Place it on the www.alrdc.com web site, with access to the site to be as directed by the Workshop Steering Committee. –Place it on a CD for distribution and/or sale as directed by the Workshop Steering Committee. Other use of this presentation is prohibited without the expressed written permission of the author(s). The owner company(ies) and/or author(s) may publish this material in other journals or magazines if they refer to the Sucker Rod Pumping Workshop where it was first presented.

3. 2012 Sucker Rod Pumping Workshop3 Disclaimer The following disclaimer shall be included as the last page of a Technical Presentation or Continuing Education Course. A similar disclaimer is included on the front page of the Sucker Rod Pumping Web Site. The Artificial Lift Research and Development Council and its officers and trustees, and the Sucker Rod Pumping Workshop Steering Committee members, and their supporting organizations and companies (here-in-after referred to as the Sponsoring Organizations), and the author(s) of this Technical Presentation or Continuing Education Training Course and their company(ies), provide this presentation and/or training material at the Sucker Rod Pumping Workshop "as is" without any warranty of any kind, express or implied, as to the accuracy of the information or the products or services referred to by any presenter (in so far as such warranties may be excluded under any relevant law) and these members and their companies will not be liable for unlawful actions and any losses or damage that may result from use of any presentation as a consequence of any inaccuracies in, or any omission from, the information which therein may be contained. The views, opinions, and conclusions expressed in these presentations and/or training materials are those of the author and not necessarily those of the Sponsoring Organizations. The author is solely responsible for the content of the materials. The Sponsoring Organizations cannot and do not warrant the accuracy of these documents beyond the source documents, although we do make every attempt to work from authoritative sources. The Sponsoring Organizations provide these presentations and/or training materials as a service. The Sponsoring Organizations make no representations or warranties, express or implied, with respect to the presentations and/or training materials, or any part thereof, including any warrantees of title, non-infringement of copyright or patent rights of others, merchantability, or fitness or suitability for any purpose. Sept. 25 – 28, 2012

4. 2012 Sucker Rod Pumping Workshop 4 General Chairman Eric Penner of BP Eric graduated from the University of Oklahoma with a BS in Chemical Engineering. He went to work for BP America as a production engineer and has worked a variety of fields, including the Pompano platform in the Gulf of Mexico deepwater, the Arkoma Asset in southeast Oklahoma, the Permian Basin, and the San Juan Basin. He currently focuses on coalbed methane production in the northern part of the San Juan Basin.

5. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 5 Keynote Speaker Todd Moehlenbrock VP of Engineering Technology, Devon Todd W. Moehlenbrock is the Vice President of Engin- eering Technology department within the E&P Stra- tegic Services Division at Devon Energy Corp. The Engineering Technology department facilitates the alignment and collaboration across Devon by develop- ing capabilities that support innovation, technology transfer, best practices, and standardization. He has over 25 years of experience in the oil and gas industry and has been at Devon since 1999. Prior to his current role, Todd was an operations engineer and manager at Devon, working the Permian Basin and Rocky Mountain assets. Previous to Devon, he worked at Sonat Exploration Co. and Texaco Inc. as a completion and production engineer. He holds a B.S. degree in Petroleum Engineering from the University of Tulsa.

6. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 6 Gal Friday Ronda Brewer Southwestern Petroleum Short Course and ALRDC Very special thanks to Ronda. Without her hard work and dedication, this Workshop couldn’t come together as well as it does. Thank You!

7. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 7 Continuing Education Courses One-Day Courses on Tuesday Course 101 --- Basic Sucker Rod Pumping –Tom vanAkkerenTues: 8:00 – 5:00Room --- 20 Course 102 --- Shooting and Interpreting Fluid Levels in Sucker Rod Wells –Lynn RowlanTues : 8:00 – 5:00Room --- 17 Course 201a --- Dynagraph Analysis –Louis RayTues: 8:00 – 5:00 Room --- 18

8. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 8 Continuing Education Courses One-Day Courses on Wednesday Course 103 --- Sucker Rod Pump Automation Hardware and Software –Anthony AllisonWed: 8:00 – 5:00Room --- 18 Course 201b --- Troubleshooting Rod and Pump Problems –Lynn RowlanWed: 8:00 – 5:00Room --- 17

9. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 9 Continuing Education Courses Two-Day Courses on Tuesday & Wednesday Course 202 --- Care, Handling, Best Practices, and Failures –Mike BrockTues & Wed: 8:00 – 5:00Room --- 19 –Mike Poythress –Russell Stevens –Justin Conyers Course 203 --- Rod System Design –Norm HeinTues & Wed: 8:00 – 5:00Room --- 16

10. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 10 Technical Sessions INew Technology, R&D –Thursday: 7:55 – 12:00 Rooms ---- 16 - 18 –Chair: Tom Cochrane, ConocoPhillips –Steel Rod Testing Norris Prod. Solutions –Polish Rod Bending ONGC, India –Fluid Load Lines Weatherford –Thermo Plastic TubingWestern Falcon –Pump Slippage Echometer –Downhole Gas Separators Echometer \

11. Sept. 25 –28, 2012 2012 Sucker Rod Pumping Workshop 11 Technical Sessions IIDesign, Automation, Optimization, Challenges –Thursday: 1:30 – 4:00 Rooms ---- 16 - 18 –Chair: Norm Hein, Norris Prod. Solutions –Sucker Rod Side LoadsConocoPhillips –QRod Design ToolEchometer –Modified Everitt-JenningsWeatherford –Dual Damping FactorsWeatherford III Case Histories, Experiences, Best Practices –Friday: 7:55 – 12:00Rooms ---- 16 - 18 –Chair: Stacy Horn, EOG; Rick Webb, Wilson –Lower CostsKey Energy –Slim Hole CouplingsNorris Prod. Solutions –Long Stroke UnitsWeatherford –Back PressureWells Whisper –API RP 11BRRod Lift Consulting

12. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 12 Breakout Sessions IUnderstanding the Sucker Rod Wave Equation –Thursday: 4:30 – 6:00 –Room --- 19 - 20 –Facilitator: Victoria Pons IIRod Pumping System Failure Frequency and Failure Analysis –Thursday: 4:30 – 6:00 –Room --- 16 –Facilitator: Tom vanAkkeren

13. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 13 Workshop Sponsors Artificial Lift R&D Council ConocoPhillips South Western Petroleum Short Course

14. Sept. 25 – 28, 2011 2012 Sucker Rod Pumping Workshop 14 Workshop Sponsors Texas Tech. Dept. of Petroleum Engineering

15. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 15 Workshop Exhibitors Artificial Lift Consultants Echometer, Inc. John Crane Production Norris Rods

16. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 16 Workshop Exhibitors Permian Production Equipment Quinn Pumps Tenaris UPCO Inc.

17. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 17 Workshop Exhibitors Weatherford Artificial Lift Western Falcon Wilson Artificial Lift

18. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 18 Workshop Meals & Events Monday ALRDC Board Meeting (6:00 pm, at Workshop Hotel) Tuesday Continuing Education (8:00 – 5:00), Various Rooms Wednesday Continuing Education (8:00 – 5:00), Various Rooms Reception (5:15 – 7:00), Ballroom D, E Thursday Technical Session (7:55 – 12:00), Room 16 - 18 Lunch (12:00 – 1:00), Ballroom D, E Keynote Address (1:00 – 1:30), Room 19 - 20 Technical Session (1:30 – 4:00). Room 16 - 18 Breakout Sessions (4:30 – 6:00), Various Rooms Friday Technical Session (7:55 – 12:00 ), Room 16 - 18 Door prizes (12:00 – 12:10), Room 16 - 18 Lunch (12:10 – 1:30), Ballroom D, E Steering Committee (12:10 – 1:30), Room 21

19. Sept. 25 – 28, 2012 2012 Sucker Rod Pumping Workshop 19 Presentations on the Web Use the ALRDC Web Site www.alrdc.com –Go to: Workshops Fall 2012 Sucker Rod Presentations (or Breakouts) Access Code: 2014F86