1. 1 October 2: Spring Scales – Hooke’s law

2. 2 Question: What is exactly a spring scale measuring? Discussion: Measuring mass and measuring weight. An object’s mass is the same everywhere. An object’s weight varies with gravity.

3. 3 Equilibrium states An object is in an equilibrium state when it experiences zero net force. At equilibrium, an object can be either at rest, or coasting. A spring scale measures the force it receives. It measures weight using equilibrium. A spring scale is accurate only when everything is in equilibrium.

4. 4 Question You are standing on a bathroom scale in an elevator. When the elevator starts moving upward, the scale will read A) Exactly your weight. B) More than your weight. C) Less than your weight.

5. 5 Springs: A free spring has an equilibrium length, when its ends are not pulled or pushed. When distorted, the ends of the spring experience forces that tend to restore the spring to its equilibrium length. These forces are called restoring forces. restoring force

6. 6 Hooke’s law (the law of elasticity) The restoring force exerted by a spring is proportional to how far it has been distorted from its equilibrium length. The restoring force is directed to oppose the distortion.

7. 7 Robert Hooke (1635-1703) English natural philosopher, architect and polymath. Discovered “the law of elasticity”. Discovered cell. No portrait exists.

8. 8 Question: How much will the spring stretch if I add more bricks?

9. 9 More examples of Hooke’s law

10. 10 Read: Ch3: 1 Homework: Ch3: E5,7;P3 Due: October 9

11. 11 October 5: Ball Sports: Bouncing – Coefficient of restitution

12. 12 Springs: Elastic potential energy x I stretched a spring for a distance of x. The spring has a spring constant of k. Question 1: Did I do work on the spring? Question 2: How much work have I done on the spring? Question 3: Where has my work gone?

13. 13 Energy change in a bouncing ball Collision energy: The kinetic energy absorbed during the collision. Rebound energy: The kinetic energy released during the rebound. When a ball strikes a rigid wall, the ball’s kinetic energy decreases by the collision energy. elastic potential energy increases as it dents. When the ball rebounds from the wall, the ball’s elastic potential energy decreases as it undents. kinetic energy increases by the rebound energy.

14. 14 Question: Why can’t a ball that’s dropped on a hard floor rebound to its starting height? Answer: Rebound energy < Collision energy because of loss of the energy into thermal energy.

15. 15 Coefficient of restitution: Measuring a ball’s liveliness Coefficient of restitution Is a conventional measure of a ball’s liveliness. Is the ratio between the outgoing and the incoming speeds: Is measured in bouncing from a rigid surface.

16. 16

17. 17 Question 2: A ball’s coefficient of restitution is 0.5. It is dropped from 1 meter high onto a rigid floor. How high will it bounce? Question 1: A basket ball hits a rigid floor at a velocity of 2 m/s. What is its rebound velocity if the coefficient of restitution is 0.80?

18. 18 Read: Ch3: 2 Homework: Ch3: E11;P4 Due: October 14

19. 19 October 7: Ball Sports: Bouncing – Effects from surfaces

20. 20 Review questions: 1.A tennis ball has a coefficient of restitution of 0.75. It hits a rigid floor at a speed of 2 m/s. How much is its rebound speed? 2.If the tennis ball is dropped from 1 meter high onto the floor, how high will it bounce?

21. 21 Ball bouncing from an elastic surface Both the ball and the surface dent during the collision. Work done in distorting each object is proportional to the dent distance. Whichever object dents more receives more collision energy. Both the denting ball and the denting surface store and return energy. A soft, lively surface can help the ball to bounce.

22. 22 Examples of lively surfaces

23. 23 Ball bouncing from a moving surface Incoming speed → relative approaching speed Outgoing speed → relative separating speed The coefficient of restitution now becomes

24. 24 Relative velocities Two cars are traveling at 60 mph and 50 mph, respectively, according to a pedestrian. 1)When they collide head-on, how much is their approaching speed? 2)When they collide head-on-tail, how much is their approaching speed?

25. 25 Ball bouncing from a moving surface: Example The approaching speed is Baseball’s coefficient of restitution is 0.55. The separating speed is The bat heads toward the pitcher at 100 km/h. The ball heads toward the pitcher at 200 km/h. 110 km/h. 210 km/h.

26. 26 The ball’s effects on the bat The ball 1) pushes the bat back and 2) rotates the bat. When the ball hits the bat’s center of percussion, the bat’s backward and rotational motions balance, so that the bat’s handle doesn’t jerk. When the ball hits the bat’s vibrational node, the bat doesn’t vibrate.

27. 27 Read: Ch3: 2 Homework: Ch3: E14,19 Due: October 14

28. 28 October 9: Carousels and Roller Coasters – Circular motion

29. 29 Examples of circular motions

30. 30 Uniform circular motions An object is in a uniform circular motion if its trajectory is circular and its speed is a constant. When an object is in a uniform circular motion, it has a net acceleration toward the center of the circle, which is called the centripetal acceleration. The centripetal acceleration is caused by a centripetal force, which is the net force exerted on the object.

31. 31 Centripetal acceleration and centripetal force The centripetal force is given by The centripetal acceleration is given by

32. 32 More about centripetal force Centripetal force is needed to keep the circular motion of an object, otherwise the object will move on a straight line according to Newton’s first law of motion. Centripetal force is not a new kind of force, it is rather a net sum of force provided by whatever traditional forces we have known. There is no such force called centrifugal force exerted on the object. Centrifugal force is only related to our feeling.

33. 33 Question: You are running on a circular track with a radius of 20 m. Your mass is 70 kg. Your speed is 2 m/s. 3)Who exerts this centripetal force on you? 1)How much is your acceleration? 2)How much centripetal force is needed?

34. 34 Question 2: How much is the acceleration of the child? A child with a mass of 30 kg is riding on a playground carousel with a radius of 1.5 m. The carousel turns one circle every two second. Question 1: How much is the speed of the child? Question 3: How much is the centripetal force on the child? Questions:

35. 35 Examples of centripetal forces

36. 36 Read: Ch3: 3 Homework: Ch3: E31;P6 Due: October 14