1. VECM

2. First we test to see if variables are stationary I(0)
First we test to see if variables are stationary I(0). If not they are assumed to have a unit root and be I(1).
If a set of variables are all I(1) they should not be estimated using ordinary regression analysis, but between them there may be one or more equilibrium relationships. We can both estimate how many and what they are (called cointegrating vectors) using Johansen’s technique.

3. If a set of variables are found to have one or more cointegrating vectors then a suitable estimation technique is a VECM (Vector Error Correction Model) which adjusts to both short run changes in variables and deviations from equilibrium.
In what follows we work back to front. Starting with the VECMs, then Johansen’s technique than stationarity.

4. We have data on monthly unemployment rates in Indiana, Illinois, Kentucky, and Missouri from
January 1978 through December We suspect that factor mobility will keep the unemployment
rates in equilibrium. The following graph plots the data.

5. use http://www. stata-press
use clear line missouri indiana kentucky illinois t Note the form of the above line to draw the line graph; then the variables which will be plotted; finally t the time variable against which they are all plotted For further info press the help key, then line

7. The graph shows that although the series do appear to move together, the relationship is not that. There are periods when Indiana has the highest rate and others when Indiana has the lowest rate.
Although the Kentucky rate moves closely with the other series for most of the sample, there is a period in the mid-1980s when the unemployment rate in Kentucky does not fall at the same rate as the other series.
We will model the series with two cointegrating equations and no linear or quadratic time trends in the original series.
For now we use the noetable option to suppress displaying the short-run estimation table.

8. vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(4) noetable

9. Except for the coefficients on kentucky in the two cointegrating equations and the constant term in the first, all the parameters are significant at the 5% level.
We can refit the model with the Johansen normalization and the overidentifying constraint that the coefficient on kentucky in the second cointegrating equation is zero.

10. constraint 1 [_ce1]missouri = 1 constraint 2 [_ce1]indiana = 0 constraint 3 [_ce2]missouri = 0 constraint 4 [_ce2]indiana = 1 constraint 5 [_ce2]kentucky = 0 vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(4) noetable bconstraints(1/5)

11. constraint 1 [_ce1]missouri = 1
Constraint number 1, [_ce1] tells us which equation and missouri=1 sets constraint.

12. The test of the overidentifying restriction does not reject the null hypothesis that the restriction
is valid, and the p-value on the coefficient on kentucky in the first cointegrating equation indicates that it is not significant. We will leave the variable in the model and attribute the lack of significance to whatever caused the kentucky series to temporarily rise above the others from 1985 until 1990, though we could instead consider removing kentucky from the model.

13. Next, we look at the estimates of the adjustment parameters
Next, we look at the estimates of the adjustment parameters. In the output below, we replay the previous results.
vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(4) bconstraints(1/5)

14. Results for D_Missouri

15. Interpretation
If the error term in the first cointegration relation is positive unemployment in Missouri FALLS.
If the error term in the second cointegrating regression is positive then unemployment in Missouri INCREASES.
The first cointegrating regression is Missouri Kentucky – 1.037Illinois = Error

16. Missouri + 0.425Kentucky – 1.037Illinois -0.389 = Error
Viewed in this context if the error term is positive then unemployment in Missouri can be viewed as being above equilibrium, same for Kentucky, but for Illinois it is below equilibrium (because if we increase Illinois the error term falls)
To get back to equilibrium we need unemployment to fall in Missouri.

17. As we can see from the regression this is what we get.
D_missouri is the change in unemployment in Missouri i.e. DUMt = Umt – Umt-1
The coefficient on _ce1 L1 (_ce1 : the error term from the first cointegrating regression; L1 lagged one period) is and significant at the 1% level.

18. Thus if in period t-1 the error term in _ce1 was positive, which we can see can be seen as unemployment in Missouri being too high compared to the equilibrium relationship with the other two states, then it will fall.
The bigger the (negative) coefficient on _ce1 L1 the more rapid is the correction. If it = -1 then the entire error is corrected for in the following period.

19. Let us look at the second cointegrating regression
This can be written as:
Error=Indiana Illinois

20. And its impact in the VECM (Vector Error Correction Model)
We can see its positive and significant. Unemployment in Missouri increases if this is error term is positive. But why? Missouri does not enter the second cointegrating vector. So why does unemployment in it respond to it?

21. Indiana =1.342Illinois + 2.93 + Error
Well it’s a little convoluted, but if the error term is positive it suggests that unemployment in Illinois is below equilibrium (and may increase as a consequence). Now from first cointegrating vector:
Missouri = Kentucky Illinois, if Illinois unemployment is to increase then the error term in the first cointegrating vector will fall (perhaps going negative).

22. Let us look at the second equation for Indiana

23. Let us look at the second equation for Indiana
The error term from _ce1 is not significant, but that from _ce2 is and it is positive. _ce2 Is
Error=Indiana Illinois

24. Now this does not make much sense if rgw error term is positive unemployment in Indiana needs to fall to restore equilibrium. Yet the coefficient on it is positive indicating the opposite.

25. Another View
vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(4) bconstraints(1/5) matrix cerr=e(beta) display cerr[1,1] display cerr[1,3] display cerr[1,5] display cerr[1,9] drop cerr1 cerr2

26. matrix cerr=e(beta) saves the coefficients from the two cointgretaing regressions in a vector cerr.
cerr[1,1] is the first, cerr[1,9] is the penultimate coefficient in the second equation
Thus: display cerr[1,9] gives: , the coefficient on Illinois in _ce2

27. Generate the error terms for the two equations
generate cerr1= cerr[1,5]+ cerr[1,1]*missouri + cerr[1,2]*indiana + cerr[1,3]*kentucky + cerr[1,4]*illinois
generate cerr2= cerr[1,10]+ cerr[1,6]*missouri + cerr[1,7]*indiana + cerr[1,8]*kentucky + cerr[1,9]*illinois

28. Now this:
regress D.missouri LD.missouri LD.indiana LD.kentucky LD.illinois L2D.missouri L2D.indiana L2D.kentucky L2D.illinois L3D.missouri L3D.indiana L3D.kentucky L3D.illinois L.cerr1 L.cerr2
Is almost equivalent to this:
vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(4) bconstraints(1/5)

29. I say almost because the VEC estimates both equations jointly and the regressions are slightly different, but very slightly.
Note to if we have a slightly different short run structure then the cointegrating vectors change which is a little unsatisfactory

30. For example compare:
vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(2) bconstraints(1/5)
vec missouri indiana kentucky illinois, trend(rconstant) rank(2) lags(4) bconstraints(1/5)

31. Short Run dynamics
Lets look at the rest of the equation, below is for D.missouri
The one period lag is significant as is the 3 period lag. That is it responds to its own lagged values.

32. But not to those of Indianna.

33. This has been based on an example in the STATA manual, but…..
There are more variables. Lets try the regression in full:
vec missouri indiana kentucky illinois arkansas ten, trend(rconstant) rank(2) lags(3)

34. Tennessee appears related to nothing, so..

35. vec missouri indiana kentucky illinois arkansas ten, trend(rconstant) rank(3) lags(3)
but Tennessee still remains unrelated to anything

37. We can see from the map that Tennessee is on the South east fringe of this group and it would be interesting to bring in North Carolina, Alabama and Georgia.

38. Johansen’s methoodology
vecrank implements three types of methods for determining r, the number of cointegrating equations in a VECM. The first is Johansen’s “trace” statistic method. The second is his “maximum eigenvalue” statistic method. The third method chooses r to minimize an information criterion.
All three methods are based on Johansen’s maximum likelihood (ML) estimator of the parameters of a cointegrating VECM.

39. webuse balance2
We have quarterly data on the natural logs of aggregate consumption, investment, and GDP inthe United States from the first quarter of 1959 through the fourth quarter of As discussed in King et al. (1991), the balanced-growth hypothesis in economics implies that we would expect to find two cointegrating equations among these three variables.

40. describe

41. In this example, because the trace statistic at r = 0 of 46
In this example, because the trace statistic at r = 0 of exceeds its critical value of 29.68, we reject the null hypothesis of no cointegrating equations.
Similarly, because the trace statistic at r = 1 of exceeds its critical value of 15.41, we reject the null hypothesis that there is one or fewer cointegrating equation.
In contrast, because the trace statistic at r = 2 of is less than its critical value of 3.76, we cannot reject the null hypothesis that there are two or fewer cointegrating equations.

42. Because Johansen’s method for estimating r is to accept as the actual r the first r for which the null hypothesis is not rejected, we accept r = 2 as our estimate of the number of cointegrating equations between these three variables.
The “*” by the trace statistic at r = 2 indicates that this is the value of r selected by Johansen’s multiple-trace test procedure

43. vecrank y i c, lags(5) level99
In the previous example, we used the default 5% critical values. We can estimate r with 1% critical values instead by specifying the level99 option.
The output indicates that switching from the 5% to the 1% level changes the resulting estimate from r = 2 to r = 1.

44. The maximum eigenvalue statistic
A second test. This assumes a given r under the null hypothesis and test this against the alternative that there are r+1 cointegrating equations. Johansen (1995, chap. 6, 11, and 12) derives an LR test of the null of r cointegrating relations against the alternative of r+1 cointegrating relations.
This method is used less often than the trace statistic method, but often both test statistics are reported.

45. vecrank y I c, lags(5) max levela
The levela option obtains both the 5% and 1% critical values.

46. The test statistics are often referred to as lambda trace and lambda max respectively
We print out both tests in this table the eigenvalue ones are in the second half of the table.
The test is for r versus r+1 cointegrating vectors.
In this example, because the trace statistic at r = 0 of exceeds its critical value of 29.68, we reject the null hypothesis of no cointegrating equations.
Similarly, because the trace statistic at r = 1 of exceeds its critical value of 15.41, we reject the null hypothesis that there is one or fewer cointegrating equation. In contrast, because the trace statistic at r = 2 of is less than its critical value of 3.76, we cannot reject the null hypothesis that there are two or fewer cointegrating equations.
The net result is we conclude there are 2 cointegrating vectors.

47. Stationarity
Intuitively a variable is stationary (I(0) – integrated to order nought) if its characteristics do not change over time, e.g. variance, covariance and mean is unchanging.
Another way of looking at it is that ρ<1 in the following equation for a variable y:
Yt = ρYt-1
We do not estimate the above, but subtract Yt-1 from both sides:
Yt - Yt-1 = ρYt-1 -Yt-1 =(ρ-1)Yt-1
Now in this regression we test that (ρ-1) is significantly negative, which implies ρ<1. If we reject this we say y is I(1) and it has a unit root. In this case doing time series OLS, etc on a variable with variables that are I(1) results in bias. The Johansen method is a suitable alternative.
The above is the Dickey Fuller test (DF), add lagged values of Yt - Yt-1 to get rid of serial correlation and we have the augmented
Dickey Fuller test.

48. Stationarity
Among the earliest tests proposed is the one by Dickey and Fuller (1979), though most researchers now use an improved variant called the augmented Dickey–Fuller test instead of the original version.
Other common unit-root tests implemented in Stata include the DF–GLS test of Elliot Rothenberg, and Stock (1996) and the Phillips–Perron (1988) test.

49. webuse air2 dfuller air The test statistics is less negative than any of the critical values and hence we cannot reject the null hypothesis that the variable exhibits a unit root and is thus not stationary

50. dfuller air, lags(3) trend
This is a similar regression, but includes 3 lagged values and a trend term. It is now stationary. What has made the difference?

51. The inclusion of the trend term

52. dfuller air, lags(3) trend regres
Lagged values of D.air
This is the test statistic, the coefficient on air(t-1) =L1.air

53. The regression basically regresses the change in the variable (D
The regression basically regresses the change in the variable (D.air) on lagged changes an the lagged value of air plus a constant and time trend.
The inclusion of lagged D.Air values makes this the augmented Dickey-Fuller test, i.e. it is what differentiates ir from the Dickey Fuller test.

54. pperron air
Phillips and Perron’s test statistics can be viewed as Dickey–Fuller statistics that have been made robust to serial correlation by using the Newey–West (1987) heteroskedasticity- and autocorrelation-consistent covariance matrix estimator.

55. Z(rho) is the main statistic we are interested in as it is similar to the ADF test statistic.

56. DFGLS Test webuse lutkepohl2 dfgls dln_inv
dfgls tests for a unit root in a time series. It performs the modified Dickey–Fuller t test (known as the DF-GLS test) proposed by Elliott, Rothenberg, and Stock (1996). Essentially, the test is an augmented Dickey–Fuller test, similar to the test performed by Stata’s dfuller command, except that the time series is transformed via a generalized least squares (GLS) regression before performing the test.
Elliott, Rothenberg, and Stock and later studies have shown that this test has significantly greater power than the previous versions of the augmented Dickey–Fuller test.