1. Forensic Ballistics

2. What is Ballistics? Ballistics is the science that deals with the _________, behavior and effect of a projectile. Ballistics is the science that deals with the _________, behavior and effect of a projectile. A projectile, such as a bullet, is an object that leaves the source of its energy behind and is effected only by ___________. A projectile, such as a bullet, is an object that leaves the source of its energy behind and is effected only by ___________. The flight ________ of the projectile is also studied. The flight ________ of the projectile is also studied.

3. Three Categories of Ballistics ____________Ballistics- what physically occurs inside the gun ________once a projectile is fired. ____________Ballistics- what physically occurs inside the gun ________once a projectile is fired. External Ballistics- what physically happens to the projectile once it _________the barrel. External Ballistics- what physically happens to the projectile once it _________the barrel. Terminal Ballistics- how a projectile acts when it encounters a __________. Terminal Ballistics- how a projectile acts when it encounters a __________.

4. Forensic Ballistics Forensic Ballistics is the science of __________firearms, bullets and bullet impacts. Forensic Ballistics is the science of __________firearms, bullets and bullet impacts. Ballistic fingerprinting is analyzing firearm _______________to determine if that particular firearm was used in the crime. Ballistic fingerprinting is analyzing firearm _______________to determine if that particular firearm was used in the crime.

5. Categories of Firearms There are three categories of firearms: There are three categories of firearms: _______________– includes pistols, revolvers and derringers _______________– includes pistols, revolvers and derringers ________Guns – includes rifles and shotguns ________Guns – includes rifles and shotguns ____________Guns – includes cannons and anti-aircraft gun ____________Guns – includes cannons and anti-aircraft gun

7. Parts of a Handgun An understanding of the parts of any gun is essential in forensic ballistics. An understanding of the parts of any gun is essential in forensic ballistics.

8. Parts of a Bolt-Action Rifle

9. Parts of a Pump-Action Shotgun

10. Components of Ammunition In addition to the parts of a gun, it is essential to know the components of ammunition. In addition to the parts of a gun, it is essential to know the components of ammunition. Bullet Shotgun Shell

11. Parts of a Gun – The Barrel The diameter of a rifled gun barrel is equal to the casing and ___________. Caliber can be recorded in____. For example, a 9 mm handgun. OR English (.22, or.45)

12. Parts of a Gun- The Barrel (cont) Most gun barrels are hollow tubes of steel. Except for a shotgun, the inside surface of the gun barrel is ____________. Most gun barrels are hollow tubes of steel. Except for a shotgun, the inside surface of the gun barrel is ____________. The process of rifling creates spiral _________in the barrel. The areas between the grooves are called _________. The process of rifling creates spiral _________in the barrel. The areas between the grooves are called _________.

14. A gun manufactured by Colt has lands and grooves that have a ______hand twist. A gun manufactured by Colt has lands and grooves that have a ______hand twist. Are these from a Colt?. Are these from a Colt?.

15. Striations As the bullet travels through the barrel, the grooves guide the bullet and cause it to ________. As the bullet travels through the barrel, the grooves guide the bullet and cause it to ________. ___________, or fine lines, in the gun barrel make the same striations on the bullet. These striations are __________to the firearm. ___________, or fine lines, in the gun barrel make the same striations on the bullet. These striations are __________to the firearm.

16. Bullet Comparisons Every bullet can be matched to a particular weapon through comparing __________marks.

17. Comparison of Reference and Crime Scene Bullets When the suspected weapon is retrieved, a ___________bullet will be fired from the _____. The ballistic fingerprint of the crime scene bullet is then compared to that reference bullet using a _________________ microscope. When the suspected weapon is retrieved, a ___________bullet will be fired from the _____. The ballistic fingerprint of the crime scene bullet is then compared to that reference bullet using a _________________ microscope.

18. Is This a Match?

19. How Exact is the Comparison? A perfect match is _______. A perfect match is _______. Dirt, rust, minute changes in the gun barrel as more bullets are fired and ___________of the bullet on impact may change the striations. Dirt, rust, minute changes in the gun barrel as more bullets are fired and ___________of the bullet on impact may change the striations.

20. Other Marks on a Fired Bullet Basically, all guns fire by applying explosive pressure behind a projectile to launch it down a barrel. Basically, all guns fire by applying explosive pressure behind a projectile to launch it down a barrel. This firing process also leaves unique marks and/or impressions on the bullet and bullet case. This firing process also leaves unique marks and/or impressions on the bullet and bullet case.

21. What is the Firing Process? The ammunition is _________into the gun, the hammer is cocked and then the _________is pulled. Pulling the trigger initiates the process and a firing ______strikes and _________the primer. The primer ____________and ignites the ______________.

22. What is the Firing Process? (cont) As the propellant burns, gases _______up inside the bullet case and the bullet is _______forward into the barrel. The bullet is forced down the barrel by the expanding gases and the bullet case is slammed ______against the breech _____. Imperfections in the barrel and on the breech face are transferred to _________of the bullet and bullet case.

23. What is the Firing Process? (cont) As the bullet moves down the barrel and exits the gun, the cartridge either ________in the back of the barrel or it is _________by an ejector mechanism. As the bullet moves down the barrel and exits the gun, the cartridge either ________in the back of the barrel or it is _________by an ejector mechanism.

24. Identifying Marks from the Firing Pin Metal-to-metal contact between the bullet case and the firing _____leaves an _____________on the case. This impression is in the shape of the firing pin. Metal-to-metal contact between the bullet case and the firing _____leaves an _____________on the case. This impression is in the shape of the firing pin.

25. Identifying Marks from the Breech Face and Ejector Mechanism Markings from the breech face that occur when the bullet case is slammed back as the bullet moves forward. Markings from the breech face that occur when the bullet case is slammed back as the bullet moves forward. Markings from the ejector mechanism that occur when the bullet case is ejected from the gun. Markings from the ejector mechanism that occur when the bullet case is ejected from the gun.

26. Identifying marks on a Shotgun Cartridge Shell A shotgun has a _________barrel so the projectile is not marked with any type of _____________. A shotgun has a _________barrel so the projectile is not marked with any type of _____________. However, the shotgun __________may have the same markings as a bullet _______. However, the shotgun __________may have the same markings as a bullet _______.

27. The Data Base for Firearm Information Originally, the information about firearms, ammunition and identifying marks was kept by two different agencies; the FBI and the ATF&E. Originally, the information about firearms, ammunition and identifying marks was kept by two different agencies; the FBI and the ATF&E. The FBI maintained a system known as DRUGFIRE and the ATF&E maintained a system known as Integrated Ballistics Identification System (IBIS). The FBI maintained a system known as DRUGFIRE and the ATF&E maintained a system known as Integrated Ballistics Identification System (IBIS).

28. The Data Base for Firearm Information This two agency system was confusing and unproductive. So in ______, the two systems were combined into the National Integrated Ballistics Information Network (________). This system has over 800,000 computerized images.

29. Gunpowder Residues When a firearm is discharged, unburned and partially burned _________of gunpowder in addition to ______are propelled out of the _______along with the bullet towards the target.

30. Gunpowder Residues If the ___________of the weapon is sufficiently close to the target, gunpowder ___________is deposited on the __________.

31. Distance Determination The process of determining the distance between the firearm and the target is usually based on the ____________of powder patterns or the ________of a shot pattern (shotgun). As the distance increases the residue ___________. Contact Shot

32. . DISTANCE – 9 inches

33. DISTANCE – 15 inches

34. DISTANCE – 27 inches

35. Distance Determination Distance determination is necessary for many gunshot wounds. If the shooter pleads ________________, it is very important to know the __________between the _________and victim. Distance determination is necessary for many gunshot wounds. If the shooter pleads ________________, it is very important to know the __________between the _________and victim. Suicide victims will also have ________on close wounds. Lack of residue may indicate _______play. Suicide victims will also have ________on close wounds. Lack of residue may indicate _______play.

36. Residue on Clothing Clothing of the victim is __________tested for gunshot residue to confirm the distance determination. The _______Test indicates a positive result with a color change to _______. Clothing of the victim is __________tested for gunshot residue to confirm the distance determination. The _______Test indicates a positive result with a color change to _______.

37. Gunshot Residue (GSR) on Hands When a weapon is fired residue is propelled both forward and __________. When a weapon is fired residue is propelled both forward and __________. The residue that is propelled backwards leaves traces on the shooter’s _______as well as anyone within very close range. The residue that is propelled backwards leaves traces on the shooter’s _______as well as anyone within very close range.

38. GSR on Hands The GSR is most likely concentrated on the thumb _____and the _____of the firing hand. The GSR is most likely concentrated on the thumb _____and the _____of the firing hand. The GSR stays on the hands for approximately ___ hours and is easily removed by washing or wiping the hands. The GSR stays on the hands for approximately ___ hours and is easily removed by washing or wiping the hands. In a suicide, the hands will be ________and tested for GSR at the Medical Examiner’s office. In a suicide, the hands will be ________and tested for GSR at the Medical Examiner’s office.

39. Today’s tests for GSR on Hands Barium and __________are both components in GSR. Several techniques are used to test for these elements. Barium and __________are both components in GSR. Several techniques are used to test for these elements. 1. First, the investigator will remove the GSR particles with ______or _______. 2. Next, the particles may be examined with a Scanning Electron Microscope, Neutron Activation Analysis or Flameless Atomic Absorption Spectrophotometry. The presence of Barium and Antimony is considered a positive for GSR.

40. Serial Number Restoration Firearms are “ ________” with an identification serial _________. These numbers are linked to the _______of the firearm. Firearms are “ ________” with an identification serial _________. These numbers are linked to the _______of the firearm. Identification numbers are usually _______on the metal body, frame or plate of the gun. Identification numbers are usually _______on the metal body, frame or plate of the gun. Many times, criminals “_______” the serial number and it has to be restored once the weapon is at the crime lab. Many times, criminals “_______” the serial number and it has to be restored once the weapon is at the crime lab.

41. Serial Number Restoration To restore a serial number that has been removed or obliterated, the area must be thoroughly cleaned and polished. An etching reagent is applied which will react with the strained area faster than the unaltered metal, allowing the numbers to appear.

42. Collection and Preservation of Firearm Evidence Firearms Safety is the most important precaution, preventing all accidental discharge of a loaded weapon in transit. All firearm evidence should be marked for identification with evidence tag attached to the trigger guard. Firearm recovered from an underwater location should be transported in the submerged in the water found to prevent rust.

43. Ammunition Bullets recovered at a crime scene are scribed with the investigator’s initials and should be wrapped in tissue paper before transport to protect any trace evidence. The exact location of shell casings should be noted.

44. Gunpowder Deposits A firearm victim’s clothing must be preserved to prevent damage or disruption to the gunpowder residues deposited around the bullet hole. Wet clothing should be air dried out of direct sunlight and then folded for protection. Each item should be placed in a separate paper bag.