1. Plant Parts

2. Root systems: A root system is the  network off all the roots of a plant; the system of roots and related organs that a plant develops.

3. What are the types of root systems?
-Taproot: one main root, has no nodes
(carrot, evergreen, kochia)
-Fibrous root: many nodes, branching root system (grasses)

5. Differences Taproot Survive Drought Better Tend to grow straight down
Very thick center main root
Fibrous
Are thin and hair like
Usually shallow
Will typically dry out easily
Multiple root systems

6. Root Systems Area of cell division Area of cell elongation
Root cap- outermost part of a root
Tough cells that penetrate the soil
Pushes through soil partials
Xylem – carry water and mineral travel up the stem
Phloem – manufactured food travels down
Root hairs are small microscopic roots
Area of cell division
Allows roots to grow longer
New cell replace worn away cells
Area of cell elongation
Between the root cap and the plan base
Cells become longer
Cells become specialized

7. To help prevent soil erosion, which root system would be best?
Fibrous

8. Stem Systems

9. What are the functions of stems?
1) transport water, nutrients, sugars 2) support leaves, flowers and fruit 3) store food

10. Types of Stems

11. Stem Types Woody: Tough and winter hardy; often covered with bark
Herbaceous:
Succulent; often green; will not over winter in many climates

12. What are the types of stems?
Woody Stem: trees, shrubs, woody perennials
2) Grass Stem: hollow or filled
3) Herbaceous Stem: like woody but softer (clover, alfalfa)
4) Modified Stem: are plants like corms, rhizomes, and tubers (potatoes, ginger, and bulb plants)

16. Types of Modified Stems
Bulbs: (onion)
Tubers: (potato)
Stolons/Runners: above ground runner (strawberry)
Rhizomes: below ground runners (field bindweed or creeping jenny)
Tendrils: different types of vines have these to latch onto things (grapes)
Cladophylls: (prickly) most cacti fall under this category

20. What are the parts of a plant?
Xylem and Phloem made up of parenchyma cells Node: swollen part of stem where buds form (leaves or stems grow here) Internode: stem tissue between nodes

23. What are the parts of a plant?
Epicotyl: all of plant formed above cotyledonary node Cotyledons: leaves formed at first node (cotyledonary node) New shoots or bud normally grow out of the axil Axil is the upper angle above a leaf or flower stem, and the stalk Lenticels are pores that allow for gas exchange to pass

25. What are buds?
special tissue on stems that can grow into new plant parts

26. Leaf Systems

27. What are leaves? undergo photosynthesis, exchange gases
Manufactures food for the plant by using light energy
Converts sunlight into food

28. What are leaf margins?
is the boundary area extending along the edge of the leaf. There are lots of different types of leaf margins that are important for plant identification

29. Common Types
The basic types of margins are: Entire:  having a smooth edge with neither teeth nor lobes Toothed :  having a saw like margin with small tooth that can vary in size (from very small to medium), in sharpness (from needle-like to soft) and in shape (from rounded to points). Lobed: having some type of indentation toward the midrib that can vary in profundity and shape (rounded or pointed) and the incisions (sinus) go less than halfway to the midrib Parted (or cleft):  having some type of indentation toward the midrib that can vary in profundity and shape (rounded or pointed) and the incisions (sinus) go more than halfway to the midrib.

32. What is the difference between a simple leaf and a compound leaf?
simple leaf = 2 parts (leaf blade and petiole)
Petiole is the stem of the leaf, may or may not have one

33. What is the difference between a simple leaf and a compound leaf?
Compound leaf: leaf blade divided into leaflets

34. What are the different types of compound leaves?
Palmately compound

35. What are the different types of compound leaves?
Pinately compound

36. Types of Leaf Bud arrangements

37. Buds are described according to:
1) structures into which they grow
-Vegetative: leaves or stems
-Floral: flowers
-Mixed: both
2) where buds appear on stem
-Apical: tips of stems
-if floral = bush
-if vegetative = vine
-Axillary: where leaf joins stem
-Adventitious: near wounds

40. Bud Arrangements 3) How are Buds arranged? Alternate (alfalfa)
Opposite (beans)
Whorled (not common)

42. Leaf Shapes, Venation, Apices and bases

43. Leaf Shapes…….
In botany there are many terms, usually derived from Latin, used to describe the shape of a plant leaf. The following are some of the basic ones dealing with leaf blade shapes
General overwiew:
Acicular: Having the shape of a needle
Cuneate: Broad and truncate at the summit, narrowly triangular, and tapering toward the base;
Deltoid: Triangular in outline, suggesting a capital delta.
Lanceolate: Lance-shaped, tapering from a broad base to an apex; much longer than wide
Ovate: Egg-shaped with the broadest part toward the base (note that obovate is the reverse relative)
Obovate: Stem attaches to tapering point petiole attachment to the blade)
Cordate: Heart shaped with a basal sinus.
Peltate: Shield shaped with the petiole not attached at the blade margin (peltata): Rounded, stem underneath
Scale leaf: Small sharp-pointed leaf with a broad base. They usually overlap on the stem.

45. Leaf Bases, Venation, and Apices
The leaf base is the lowest  part of a leaf  lamina that is near the petiole.      
Leaves bases vary greatly from plant to plant and are useful in classification and identification. Bilateral symmetry is typical. However, when the leaf shows asymmetry at the base this is known as an oblique leaf base.
The outer end or apex (Apices) of a leaf  lamina that is opposite the petiole.      
 Leaves apexes vary greatly from plant to plant and are useful in classification and identification.
The venation is the characteristic arrangement of veins in a leaf.
  There are lots of different types of leaf venation that are important for plant identification.
The term venation refers to how veins are distributed in the leaf blade

47. Leaf Functions Stomata: pores in the stems that allow gas exchange
Guard cells open and close the stoma in a leaf
Chloroplasts give the leaf its strength and are the site for food production
Plant cell gives the leaf its strength and site for food production
What process manufactures food in the leaves?
Photosynthesis
The cuticle is the topmost layer
Epidermis is the surface layer on the upper and lower side of the leaf
Mesophyll contains layers of palisades and spongy tissue

50. Lets Review A little….. What are internodes?
Name one type of Modified stem?
Give an example of a tuber?
What are the 2 leaf types?
Name one leaf shape?
What is venation?
Give an example of a Taproot plant?

51. Links http://www.vplants.org/plants/glossary/plat e04.html