1. Verification of Current Divider Rule By: Engr.Irshad Raheem Memon
PRACTICAL # 02
Verification of Current Divider Rule
By: Engr.Irshad Raheem Memon

2. OBJECTIVE
Objective of this practical is to understand and verify that current is divided in a parallel resistive circuit

3. Some Concept of Current Divider Rule
Current divider rule states that “Current is divided in a parallel circuit, whereas sum of all currents through all resistors is equal to total current”
Current remain same in series circuit but it used to change in parallel circuit

4. Formula to Find Current at required Resistor

5. Coming Towards Objective Now

6. REQUIRED APPARATUS Multism Software Resistors Bread board Multimeter
DC voltage source
Connecting wire etc.

7. PROCEDURE
Connect two resistors “R1” and “R2” in parallel and then connect positive terminal of DC voltage source “Vs” with terminal “a” of R1 & R2 and negative terminal of DC voltage source “Vs” with terminal “b” of R1 & R2 as shown in figure 01. Find out current through R1 and R2 with the help of multimeter as well as formula

8. CURRENT DIVDER VERIFYING CIRCUIT ON MULTISM SOFTWARE
FIGURE 01

9. RESULTS OF AMMETER’S OF FIGURE 01 CIRCUIT

10. PROVE CURRENT VALUES OF FIGURE 01 CIRCUIT MANUALLY(USING FORMULA)

11. ANOTHER CIRCUIT EXAMPLE ON MULTISM
FIGURE 02

12. RESULTS OF AMMETER’S OF FIGURE 02 CIRCUIT

13. PROVE CURRENT VALUES OF FIGURE 02 CIRCUIT MANUALLY(USING FORMULA)

14. ANY QUERY