Download presentation
Presentation is loading. Please wait.
Published byEleanore Barton Modified over 9 years ago
1
Providing Beams for Power Production What has been done Problems and Boundary Conditions Future improvements and possibilities
2
30 GHz Power Production in CTF3 36% Power lost in ‘Translation’
3
30 GHz Power Production in CTF 3/2004 run 70 MW, 80 ns 5 MW,400 ns, phase switch 30 ns rise time (~100 MW out of Pets)
4
30 GHz Power Production in CTF 3/2004 run 20 MW,250 ns, phase switch 100 ns rise time
5
30 GHz Power Production in CTF 3/2005 run 2 60 MW, 70 ns 15 MW,300 ns ~100 MW out of Pets 25 MW out of Pets
6
5.11.2005, 30 ns, 55-60 MW in CTFII, 85 % Transmission (Peak)
7
5A Beam set up first night 7 A out of the Gun 5 A before PETS
8
3.5A Beam along the LINAC 4.5 A out of the Gun 3.5 A before PETS
9
30 GHz Power Production in CTF 3 Expected Achieved (P out (MW) = 4.762 I 2 (A) *F 2 ) 3.5 A:58 MW 30 MW,90 %Trans 4.5 A:96 MW 77 MW 5A:119 MW 100 MW, 80 % Trans 95-100% Transmission Power Production is consistent with F=0.9 for the current going into the PETS Transmission achieved is very reasonable
10
PETS Transmission Clearly very critical, has to be perfect for no losses !
11
Beam stability with the 3.5 A beam for PETS
12
Standard deviation: BPM0115: 2.6 % BPM0240: 1.3 % BPM0280: 0.9 %
13
Beam stability with the 3.5 A beam for PETS Rf jitter taken out
14
Beam stability with the 3.5 A beam for PETS Standard deviation: BPM0790: 1.5 % with rf jitter BPM0790: 0.3% w/o rf jitter
15
Switching of operation modes Turns out to be unproblematic after some experience Switching times of 15-30 Minutes achieved But, a few critical elements: (Gun, Collimators, RF-phases, Correctors) Problems Repetition Rate: Got a leak at 50 Hz, 10 Hz most of the time Radiation: Activation of the beam line around PETS Collimators: Mechanical and control problems Stay at 10 Hz for time being, work on Transmission, Move collimators as little as possible
16
Constraints Gun current, Pulse Length and Energy 8-9 A Maximum out of Gun 6A Max into PETS 3.5 A 100 MeV 200 ns 5 A 90 MeV200ns 6A 80 MeV200 ns 3.5 A 80 MeV400 ns Overloading the structures at 6A
17
Future possibilities
18
Beam studies to improve Emittance and to study trade off of bunch length vs Energy Spread A little bit more current: 5.5 -6 A in front of PETS ? (115-137 MW out of PETS, 69-82 MW in CTF II) Phase Flip for pulse compressor Let’s aim for 100 MW into DUT We are missing 60%: 30% from beam, 10% from losses, 20% from PETS (20 cm longer) My conclusion
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.