1. Graphic Science (MEL110) (2-0-4) Dr. Ashish K Darpe, Department of Mechanical Engineering III-176#6095(O), #1618(R) Course for Part 1: Introduction, general instructions for lettering, instruments, etc. Projection Systems- perspective, orthographic, isometric & oblique, Dimensioning Practicals for Part 1 – sketching on tracing sheets. Tracing sheet pad, one graph paper, H&HB pencils, eraser, scale, compass & divider, zero grade sand paper.

2. Evaluation based on Practical work: 40% Minor Tests:15% each Major Test: 30% Text Book:Fundamentals of Engineering Drawing Luzadder & Duff (9 th or 11 th Edition) Prentice-Hall of India Additional Reference Book: Engineering Drawing, N D Bhatt Some practicals on computer in Computer Aided Graphics Instruction Laboratory (CAGIL) Room No. III-331-332

3. COURSE OVERVIEW Lettering Projections OrthographicAxonometric IsometricOblique Plane geometric constructions Auxiliary Planes Intersection of surfaces Development of surfaces Projection of planes and solids Sectioning and Dimensioning Computer Aided Drawing

4. ORTHOGRAPHIC PROJECTIONS ISOMETRIC PROJECTIONS

5. AUXILIARY VIEWS

6. ENGINEERING CURVES

7. DEVELOPMENT OF SURFACES

8. SECTION OF SOLIDS

9. INTERPENETRATION OF SURFACES