1. RIC 2009 Rulemaking Process: “NRC and Industry Perspectives on Improving Quality, Timeliness, and Consistency in 10 CFR 50.55a “A New Approach” Jacob Zimmerman Chief, Regulatory Analysis, Policy and Rulemaking Branch Division of Policy and Rulemaking Office of Nuclear Reactor Regulation March 11, 2009

2. 2 Inconsistent Unpredictable Customer Requirements NOT met 50.55a Rulemaking

3. 3 Lean Six Sigma Project Goal: -Establish a consistent, predictable and stable update process  Improve timeliness (24-month cycle time)  Improve stakeholder & employee satisfaction  Improve NRC resource utilization Inter-office effort: -Office of the Executive Director for Operations -Office of Nuclear Reactor Regulation -Office of Research -Office of New Reactors -Office of General Counsel -Office of Administration Assessment Period: -June – November 2008

4. 4 A New Approach Recommended Solutions: -Developed in December 2008 -17 solutions identified Procedures People Process

5. 5 SolutionRank Delegate 50.55a rulemaking signature authority down to NRR Office Director. 1 Provide a dedicated 50.55a rulemaking Project Manager.2 Establish a scope control procedure to control emergent issues.3 Optimize the 50.55a rulemaking concurrence process.4 Begin the Technical Branch reviews for the next 50.55a rulemaking cycle in parallel with the current. 5 Provide training to Project Managers and Technical Staff.6 Establish a steering committee for oversight.7 Establish a 50.55a rulemaking working group.8 Recommended Solutions

6. 6 SolutionRank Involve OGC early on and throughout the rulemaking process.9 Establish performance metrics tied to individual performance appraisals. 10 Create document templates.11 Define agency ASME Code Committee Program Managers (Section XI, Section III, and O & M). 12 Develop Inter-office procedure specific to 50.55a rulemaking.13 Determine the initial 50.55a rulemaking scope.14 Provide a dedicated Technical Group Coordinator.15 Enhance the MS Project schedule, including key milestones and tracking planned vs. actual. 16 Develop a standard operating procedure to track public comments and resolutions. 17 Recommended Solutions

7. 7 Next Steps Implementation Plan: -Short-term actions (planned for current rulemaking)  Pilot scope control procedure  Optimize concurrence process  Delegate signature authority downward -Long-term actions (planned for next rulemaking)  Consider performing 50.55a rulemakings in parallel (single edition & addenda)  Create inter-office procedure  Apply solutions to 50.55a Regulatory Guide (RG) rulemaking  Determine optimum number of Edition/Addenda to include in rulemaking scope Communications: -User Feedback  Incorporate RGs for Code Cases into 50.55a as frequently as possible  Incorporate Code Editions/Addenda into 50.55a every 2 or 3 years  NRC representatives on Code Committees should identify to committees, early on, what items might be conditioned (so ASME can consider addressing issues in Code prior to rulemaking).  For ongoing 2005 Addenda through 2008 Addenda rulemaking, hold a public meeting during August 2009 ASME Code Week to get feedback from ASME before publishing proposed rule.  Give ASME (public) future rulemaking schedules for Edition/Addenda and RG rulemakings, including scope of rulemakings.  Create document templates  Establish steering committee  Dedicated Project Manager

8. 8 Conclusion Improvements identified Implementation plan developed Enhancements underway Stable, Predictable and Consistent Process