Presentation is loading. Please wait.

Presentation is loading. Please wait.

LIGO-G1000411-v3 March 30, 2010 1 aLIGO BSC ISI Electronics aLIGO BSC ISI Electronics FDR 3/30/2010 LIGO-G1000411 Ben Abbott, Brian Lantz.

Published byEdith Newton Modified over 9 years ago

Similar presentations

Presentation on theme: "LIGO-G1000411-v3 March 30, 2010 1 aLIGO BSC ISI Electronics aLIGO BSC ISI Electronics FDR 3/30/2010 LIGO-G1000411 Ben Abbott, Brian Lantz."— Presentation transcript:

1 LIGO-G1000411-v3 March 30, 2010 1 aLIGO BSC ISI Electronics aLIGO BSC ISI Electronics FDR 3/30/2010 LIGO-G1000411 Ben Abbott, Brian Lantz

2 LIGO-G1000411-v3 March 30, 2010 2 KP125 Pressure Sensor (response = 53.3mV/KPa) is Given its voltage reference from an LT1021-5 aLIGO BSC ISI Electronics In-Vac Protection

3 LIGO-G1000411-v3 March 30, 2010 3 aLIGO BSC ISI Electronics Trillium Pressure Sensor Board

4 LIGO-G1000411-v3 March 30, 2010 4 aLIGO BSC ISI Electronics Trillium Pressure Sensor Board

5 LIGO-G1000411-v3 March 30, 2010 5 aLIGO BSC ISI Electronics In-Vac Protection In-vacuum pod voltage protection for GS-13s, T240s, and L4Cs per T0810012-v1

6 LIGO-G1000411-v3 March 30, 2010 6 aLIGO BSC ISI Electronics Electronics Protection Single-Sided Supply Protection in ISI Interface Chassis

7 LIGO-G1000411-v3 March 30, 2010 7 From the Back Board of the ISI Interface Chassis, all of the in-vacuum pod pairs get their own switched power. aLIGO BSC ISI Electronics Sensor Protection

8 LIGO-G1000411-v3 March 30, 2010 8 aLIGO BSC ISI Electronics

9 LIGO-G1000411-v3 March 30, 2010 9 aLIGO BSC ISI Electronics

10 LIGO-G1000411-v3 March 30, 2010 10 aLIGO BSC ISI Electronics GS-13 Channel

11 LIGO-G1000411-v3 March 30, 2010 11 aLIGO BSC ISI Electronics L4C Channel

12 LIGO-G1000411-v3 March 30, 2010 12 aLIGO BSC ISI Electronics Rack Layout

13 LIGO-G1000411-v3 March 30, 2010 13 aLIGO BSC ISI Electronics Test Procedures GS-13 Preamp GS-13 Interface L4C Interface Trillium Interface Capacitive Position Sensor Interface ISI Coil Driver Anti-Image/Anti-Alias Filter Chassis Entire BSC System

14 LIGO-G1000411-v3 March 30, 2010 14 aLIGO BSC ISI Electronics Low Frequency Zero Filter

15 LIGO-G1000411-v3 March 30, 2010 15 aLIGO BSC ISI Electronics Low Frequency Zero Filter Frequency Response

16 LIGO-G1000411-v3 March 30, 2010 16 aLIGO BSC Electronics DocDb Numbers GS-13 PreAmp D0902056-v1 GS-13 Socket Board D0902011-v3 GS-13 Interface Board D1000755-v1 L4C PreAmp D1000059-v1 L4C Interface Board D1000757-v1 Trillium Pressure and Connector Board G0900662-v2 Trillium Interface Board D1000749-v2 Capacitive Position Sensor Interface D1000057-v1 Coarse/Fine Coil Driver D0901039-v2 AA/AI Interface Board D070081-v2 ISI Interface Back Board D1000060 -v1 Overall BSC ISI Wiring Drawing D0901301-v2

Download ppt "LIGO-G1000411-v3 March 30, 2010 1 aLIGO BSC ISI Electronics aLIGO BSC ISI Electronics FDR 3/30/2010 LIGO-G1000411 Ben Abbott, Brian Lantz."

Similar presentations

AP Electricity Quiz Review

AP Electricity Quiz Review
The Friendly Weapon Be prepared....

The Friendly Weapon Be prepared....
38GXC(Q)/40GXC(Q) Service Training Sizes 18 and 24K.

38GXC(Q)/40GXC(Q) Service Training Sizes 18 and 24K.
University of Toronto ECE530 Analog Electronics Review of MOSFET Device Modeling Lecture 2 # 1 Review of MOSFET Device Modeling.

University of Toronto ECE530 Analog Electronics Review of MOSFET Device Modeling Lecture 2 # 1 Review of MOSFET Device Modeling.
LIGO-G070xxx-00-M December 19, 2007 Single Stage ISI Electronics Overview Ben Abbott Mohana Mageswaran December 19, 2007.

LIGO-G070xxx-00-M December 19, 2007 Single Stage ISI Electronics Overview Ben Abbott Mohana Mageswaran December 19, 2007.
40m Suspension Electronics Benjamin Abbott California Institute of Technology 10/18/01 G010385-00-R.

40m Suspension Electronics Benjamin Abbott California Institute of Technology 10/18/01 G R.
Molly, Gwyn, Sam, and Eric.  What are you expecting as a final result? Our current understanding is that we’re making a system that takes in a variable.

Molly, Gwyn, Sam, and Eric.  What are you expecting as a final result? Our current understanding is that we’re making a system that takes in a variable.
CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.

CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.
Internal Seismic Isolation (ISC) Overview Report for the August CDS meeting Ben Abbott Caltech.

Internal Seismic Isolation (ISC) Overview Report for the August CDS meeting Ben Abbott Caltech.
CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.

CR1000s are only one part of a data acquisition system. To get good data, suitable sensors and a reliable data retrieval method are required. A failure.
Electrical Electricity Fuses Relays Solenoids Electrical Testing

Electrical Electricity Fuses Relays Solenoids Electrical Testing
Electronic Component Functions What is this component doing my in electronic device?

Electronic Component Functions What is this component doing my in electronic device?
EE136 STABILITY AND CONTROL LOOP COMPENSATION IN SWITCH MODE POWER SUPPLY Present By Huyen Tran.

EE136 STABILITY AND CONTROL LOOP COMPENSATION IN SWITCH MODE POWER SUPPLY Present By Huyen Tran.
TE-MPE-EE, 16-Apr-2015 1 CLIQ Power supply design J. Mourao TE-MPE-EE.

TE-MPE-EE, 16-Apr CLIQ Power supply design J. Mourao TE-MPE-EE.
GC-HR-ToF Instrument overview 7/16/2015 JDC. Instrument Systems.

GC-HR-ToF Instrument overview 7/16/2015 JDC. Instrument Systems.
TF Joint Voltage Drop Instrumentation Robert Marsala (609) 243-2507 Hans Schneider (609) 243-2017 Engineering Operations August 7, 2003 TF_JOINT_Final_Design_Review.ppt.

TF Joint Voltage Drop Instrumentation Robert Marsala (609) Hans Schneider (609) Engineering Operations August 7, 2003 TF_JOINT_Final_Design_Review.ppt.
1 LIGO-G1101177-V1 Magnetometer DC Power Assessment Magnetometers are distributed in the corner station and both end stations. The complete chain of one.

1 LIGO-G V1 Magnetometer DC Power Assessment Magnetometers are distributed in the corner station and both end stations. The complete chain of one.
Washing Machine SolutionsAffordable Intelligent Motion SenseTile Hardware Design Review 1 CASL, UCD, 12 December 2008 2 Confidential mSemicon & UCD 29/08/2015.

Washing Machine SolutionsAffordable Intelligent Motion SenseTile Hardware Design Review 1 CASL, UCD, 12 December Confidential mSemicon & UCD 29/08/2015.
Low Voltage Power Requirement of TOF FEEs. Maximum 110 4.8 tray. Low Noise:  Periodic and Random Distortion (PARD) < few mV RMS Floating.

Low Voltage Power Requirement of TOF FEEs. Maximum tray. Low Noise:  Periodic and Random Distortion (PARD) < few mV RMS Floating.
4 Amp Load.500 Hard Line Cable SPSM 2 P/S Setup Configuration RF Signal Supplied by RG-6 RF Signal To TV via RG-6 Remove Central Fuse Move 20A fuse from.

4 Amp Load.500 Hard Line Cable SPSM 2 P/S Setup Configuration RF Signal Supplied by RG-6 RF Signal To TV via RG-6 Remove Central Fuse Move 20A fuse from.

Similar presentations

Ads by Google