1. Page 1 Assembled trap Bolt Trap jars Screens Dive weights (6kg) Rope threading 8-mm rope Trap cones 13mm sockets 13mm sockets Cut cable ties to remove Unscrew to remove and screw on lid

2. A 125 mm Troll float is used as a subsurface float

3. Lift by the rope only and keep vertical Rest the trap on the side of the boat on the bottom plate Puncture the parcel-tape patch to spill excess water If sediment above the patch, catch the water and sediment in the 5-litre jug and transfer to a 2-litre bottle and label

4. The bottom trap will have more sediment than the top ! Traps @ 1, 2, 6, and 7 are likely to have large amounts of sediment There are 2 traps at the top and two at the bottom = 4 traps per line = total of 40 traps

5. South Pacific Ocean. New Zealand. North Island – 1:502,000