1. ABLOY® Padlocks security grades according to EN12320
Test report

2. EN12320 & ASTM F883 test requirements SHACKLE PULLING
Grade
Product
EN 12320
Force F2
ASTM F883
In Kg
Above requirement * 1
PL320 / 50**
3 KN
225 lb
300 Kg
EN (200 %, 600 Kg)
ANSI (800 %) 2
PL320
5 KN
560 lb
500 Kg
EN (400 %, 2000 Kg)
ANSI (900 %) 3
PL330
15 KN
1125 lb
1500 Kg
(Car)
EN (66,7 %, 1000 Kg)
ANSI (400 %) 4
PL340
PL342
30 KN
2000 lb
3000 Kg
EN (50 %, 1500 Kg) 5
PL350
70 KN
4500 lb
7000 Kg
(Lorry, Bus)
EN (35,7 %, 2500 Kg)
ANSI (375 %) 6
PL362
100 KN
9000 lb Kg
(HORNET F/A18 Fighter)
EN (0 %)
ANSI (150 %)
Shackle is fixed and ram push the body downwards.
* Tested in Abloy® Joensuu factory laboratory
** No certificate available

3. EN12320 & ASTM F883 test requirements SHACKLE TWISTING
Grade
Product
EN 12320
Torque M3
ASTM F883
Torgue M3 Kg
Above requirement * 1
PL320 / 50***
40 Nm -
4 Kg
EN (0 %) 2
PL320
100 Nm
10 Kg 3
PL330
200 Nm
20 Kg
EN (45 %, 9 Kg) 4
PL340
PL342
450 Nm
45 Kg
EN (31,1 %, 14 Kg) 5
PL350
1200 Nm
120 Kg
EN (8,3 %, 10 Kg) 6
PL362
2500 Nm
250 Kg
EN (**), ??? Kg
* Tested in Abloy® Joensuu factory laboratory
** Not possible to measure (Shackle secure structure)
*** No certificate available

4. EN12320 & ASTM F883 test requirements SHACKLE CUTTING
F3 / Kg EN
Grade
Product
EN 12320
Forcee F3
ASTM F883
Force F3 Kg
Above requirement * 1
PL320 / 50**
6 KN
1000 lb
600 Kg
EN (166,7 %, 1000 Kg)
ANSI (263,6 %) 2
PL320
15 KN
2000 lb
1500 Kg
(Car)
EN (6,7 %, 100 Kg)
ANSI (77,8 %) 3
PL330
25 KN
3000 lb
2500 Kg
EN (52 %, 1300 Kg)
ANSI (181,5 %) 4
PL340
PL342
35 KN
4000 lb
3500 Kg
EN (31,4 %, 1100 Kg)
ANSI (155,6 %) 5
PL350
70 KN
7000 lb
7000 Kg
(Lorry, Bus)
EN (28,6 %, 2000 Kg)
ANSI (190,3 %) 6
PL362
100 KN
10000 lb Kg
(HORNET F/A18 Fighter)
EN (0 %)
ANSI (122,2 %)
* Tested in Abloy® Joensuu factory laboratory
** No certificate available

5. EN12320 & ASTM F883 test requirements CYLINDER PULLING (Load on cylinder plug or locking mechanism)
Grade
Product
EN 12320
Force F1
ASTM F883 Kg
Above requirement * 1
PL320 / 50** -
225 lb
100 Kg
ANSI (900 %, 900 Kg) 2
PL320
337 lb
150 Kg
ANSI (566,7 %, 850 Kg) 3
PL330
4 KN
450 lb
400 Kg
EN (400 %, 1600 Kg)
ANSI (900 %) 4
PL340
PL342
5 KN
675 lb
500 Kg
EN (400 %, 2000 Kg)
ANSI (733,3 %) 5
PL350
10 KN
1350 lb
1000 Kg
EN (150 %, 1500 Kg)
ANSI (316,7 %) 6
PL362
15 KN
2700 lb
1500 Kg
(Car)
EN (166,7 %, 2500 Kg)
ANSI (233,3 %)
Shackle removed if neccessary
F1 / Kg
* Tested in Abloy® Joensuu factory laboratory
** No certificate available

6. Measured value 10 Nm (88,5lb-in) before tool breakage
EN12320 & ASTM F883 test requirements TORQUE RESISTANCE OF CYLINDER PLUG EN
Grade
Product
EN 12320
Torque M2
ASTM F883 Kg
Above requirement * 1
PL320 / 50** -
89 lb-inch
1,0 Kg
Measured value 10 Nm (88,5lb-in) before tool breakage 2
PL320
2,5 Nm
133 lb-inch
0,25 Kg 3
PL330
5 Nm
177 lb-inch
0,5 Kg 4
PL340
PL342
15 Nm
221 lb-inch
1,5 Kg 5
PL350
20 Nm
266 lb-inch
2,0 Kg 6
PL362
30 Nm
310 lb-inch
3,0 Kg M2 Kg 1m
* Tested in Abloy® Joensuu factory laboratory
** No certificate available

7. ABLOY® Products fulfill EN12320 demands
EN12320 & ASTM F883 test requirements IMPACT RESISTANCE: BLOW ON LOCK BODY / SHACKLE
EN12320
Grade
Product
Temperature
Blows
(n)
Height
(h)
Mass
(m) 1
PL320 / 50** - 2
PL320 3
PL330
-20 °C 5
0,8 m
1,25 Kg 4
PL340
PL342
1,0 m
3,05 Kg
PL350
-40 °C
1,4 m
6,55 Kg 6
PL362
1,5 m
7,15 Kg
ASTM F883
PL320 / 50
1,0 Kg
2,0 Kg
3,0 Kg
4,0 Kg
5,0 Kg
6,0 Kg m h
** No certificate available
ABLOY® Products fulfill EN12320 demands

8. EN12320 test requirements DRILL RESISTANCE
Grade
Drilling net time
Max. number of different drills
Drill change time
included to test net time
Max. drill diameter
Drilling Force F
Without shock effect 4
2 min
3 pcs
15 sec.
12 mm
300 N
(30 kg) 5
4 min
(30 Kg) 6
8 min
FINAL TEST
Time attempt to open the product for example with paper clip, pliers, screwdriver under 150 mm long, will be included to the test net time. Product should not open or test has failed.

9. EN12320 test requirements SAWING RESISTANCE
Grade
Sawing net time
Stroke length
Stroke cycles
per minute
Sawing load F5
Blade force against product
Blade change time
Included to test net time 4
2 min
165 mm
60 pcs
300 N
(30 Kg)
60 sec. 5
4 min 6
8 min
FINAL TEST
Time attempt to open the product for example with paper clip, pliers, screwdriver under 150 mm long, will be included to the test net time. Product should not open or test has failed.
Saw blade according French standard NF E
Blade tension 1 KN

10. Padlocks BRASS PADLOCKS: PL321 PL343 PL320 PL341 PL330 GRADE 2 GRADE 3
Discontinued
PL320
PL341
GRADE 2
PL330
GRADE 3
GRADE 3

11. Padlocks STEEL PADLOCKS: PL362 PL340 PL342 PL350 GRADE 6 GRADE 5

12. PL362; THE STRONGEST PADLOCK IN THE WORLD
Padlocks
PL362; THE STRONGEST PADLOCK IN THE WORLD
GRADE 6

13. Accessories ADVANCED FEATURES: New design Coding Chamfers
Attachment chains
Dust covers for whole range

14. Accessories, locking plates
12 mm shackle hole
Non-handed
For frame fixing
Zinc-plated, polyester coated
Case-hardened steel
Fixing screws included
PL200, 202:
12 mm shackle hole
CEN grade 3
PL200 for right handed doors
PL202 for left handed doors
For frame fixing
Zinc-plated, polyester coated
Case-hardened steel
Fixing screws included
PL201, 203:
18 mm shackle hole
CEN grade 4
PL201 for right handed doors
PL203 for left handed doors
For frame fixing
Zinc-plated, polyester coated
Case-hardened steel
Fixing screws included

15. EN12320 CERTIFICATES 6 5 4 3 2 EN GRADE 1 PRODUCTS PL362 PL350 PL342
3020
PL320
PRODUCTS