1. INSTEAD OF SIMCIR USING MULTIMEDIA LOGIC

2. THE PALLET Row 1, 1st Selector Use to select and move objects

3. THE PALLET Row 1, 2nd Wire Use to connect two objects

4. THE PALLET Row 1, 3rd Node Use to add another connection in the middle of a wire

5. THE PALLET Row 2, 1st AND Gate

6. THE PALLET Row 2, 2nd OR gate

7. THE PALLET Row 2, 3rd XOR gate

8. THE PALLET Row 3, 1st NOT gate

9. THE PALLET Row 3, 3rd LED output

10. THE PALLET Row 4, 1st Switch

11. THE PALLET No power source necessary NAND is AND gate followed by NOT NOR is AND gate followed by NOT NXOR is XOR gate followed by NOT

12. EXAMPLE Add two switches Call them SW1 and SW2 respectively Use Selector to move switches around To delete use selector and press the delete key

13. EXAMPLE Add OR and NOT

14. EXAMPLE Use Wire to connect SW1 to OR and OR to NOT

15. EXAMPLE Add AND and connect to SW2

16. EXAMPLE Connect SW1 to the AND gate Connect SW2 to the OR gate

17. EXAMPLE Add another OR gate and connect the NOT and the AND gates to the new OR gate

18. EXAMPLE Add an LED and connect to the second OR gate

19. EXAMPLE Use the Selector to highlight the whole circuit

20. EXAMPLE Press the play key to activate the circuit You can stop or pause the simulation with the obvious buttons

21. EXAMPLE While the simulation is running, you can click a switch to change its output. Here SW1 was clicked.