2. ©2004 Texas Trade and Industrial Education1 Cosmetology Unit Subtitle: Roller Placement

3. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement2 Measure for the roller Length cannot be longer than the roller Width cannot be wider than the diameter of roller Measure each sub- section with the roller to be used

4. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement3 Smoothing Hair Lay ends onto roller smoothly No end wraps Use gel or wave-set as necessary Keep ends spread out across roller

5. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement4 On-Base Roller Measure for roller Hold the hair at 110° Comb hair out from the scalp

6. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement5 On-Base Roller The roller sits directly on the base Used in the top of the head Creates maximum volume

7. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement6 Anchoring the Roller Use a double-prong clippie Slide clippie bottom underneath roller Attach to the base Use only one clippie per roller Do not clip to another roller

8. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement7 Half-Base Roller Section for correct roller size Comb hair up at 90° Wrap ends smoothly onto roller Use gel or wave-set if necessary

9. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement8 Half-Base Roller The roller sits half on, half off the base Used in the crown area of the head Creates medium volume

10. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement9 Off-Base Roller Section for correct roller size Comb hair to 45° Wrap ends smoothly onto roller Use gel or wave-set if necessary

11. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement10 Off-Base Roller The roller sits completely off the base Used in the nape area of the head Creates least amount of volume

12. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement11 Indentation Roller Section for correct roller size Comb hair to 180° Roll upwards Wrap ends smoothly onto roller Use gel or wave-set if necessary

13. ©2004 Texas Trade and Industrial EducationCosmetology I - Roller Placement12 Indentation Roller The roller sits completely off the base There will be a flat indentation area above the roller Used around the hairline of the head Creates a flip