1. Scene Shop and Electricity Safety
MVHS
Theatre Production
Spring 2008

2. Why? Why? Why?
It is essential for theatre students and participants to learn the proper safety procedures in order to prevent injury to one’s self and to others.

3. Scene Shop Rules
Keep the shop clean and safe! At the end of each work session, make sure to replace all tools used, the floor is swept/vacuumed/mopped, and all exits are free from obstructions.
No one will be allowed to leave the class until everything is cleaned up!

4. Scene Shop Rules
Get help when lifting heavy objects. Lift objects by bending your knees, not your back.

5. Scene Shop Rules
Never climb a ladder unless someone on the ground is holding it steady. Never stand on the top step of a ladder, no matter how secure it seems!

6. Scene Shop Rules
Stay aware of work going on around, above, and underneath you.

7. Scene Shop Rules
Wear safety goggles to protect your eyes from splinters and dust.

8. Scene Shop Rules
Wear closed-toed shoes whenever working in the shop. Steel-toed shoes are even better! Never wear open-toed shoes like flip-flops while working.

9. Scene Shop Rules
Make sure electrical cords are clear of saw blades, water, and/or damp objects.

10. Scene Shop Rules
Never wear baggy clothes, jewelry, ties, or scarves while operating a power tool; they get caught!

11. Scene Shop Rules
Make sure that the power saws are equipped with blade guards. Never remove a blade guard from a stationary saw.

12. Scene Shop Rules
Make sure your blade is sharp, so wood does not bind, or catch, in the saw. Avoid twisting or forcing wood against the saw blade.

13. Scene Shop Rules
Keep your hands away from the blades of power saws. Use a push stick to feed small pieces.

14. Scene Shop Rules
Unplug any power tool before changing any blade or bit or when not in use.

15. Scene Shop Rules
Never touch Krazy Glue or Super Glue. It can bond skin to skin or to other materials.

16. Scene Shop Rules Paint in well ventilated areas.
Oil, alcohol, and lacquer-based paints, stains, and finishes are extremely flammable. Work away from any open flame.

17. Scene Shop Rules
Always wash out brushes and other painting tools. This includes sponges and rags. Hang them to dry away from direct heat.

18. Electricity Safety
Wear rubber-soled shoes when working around electricity.

19. Electricity Rules
Don’t touch bare wires, even if you are sure they are disconnected.
Know where the master switch and circuit breakers are located.

20. Electricity Rules
Disconnect electrical tools and equipment from electrical circuits before working with them.

21. Electricity Rules
Unplug lights before changing bulbs; a socket contains live wires.

22. Electricity Rules
Don’t work in damp locations or put a drink where it could spill. Most liquids are conductors.

23. Electricity Rules
Always disconnect electrical devices by pulling the PLUG, not the cord.
Keep cords, cables, and connectors clean and free of debris.

24. Electrical Rules
Immediately notify your technical director if any cords/cables are cracked, worn, or frayed.

25. Electrical Rules
Coil cables by plugging the connectors together or tying them with rope/twine when finished with work.

26. Electrical Rules
If electrical shock occurs, turn of the power and notify your technical director immediately.

27. Electrical Rules
Do not overload the electrical circuit when using a twofer or other multiple connector.

28. MOST IMPORTANTLY
If you are not sure of what you are doing, STOP! Ask your technical director for help or advice.