1. D. Process Flow Chart “The Brick Insulation: A Brick with Heat Insulation Properties Made Up of Styrofoam Pieces, Paper Strips and Wood Shavings”

2. GATHERING THE MATERIALS AND EQUIPMENT

3. FILLING THE CONTAINER OF ABOUT ONE-THIRD FULL WITH THE SOIL

4. ADDING ENOUGH WATER TO FILL THE CONTAINER

5. CRUSHING THE CLAY SOIL AS TINY AS POSSIBLE. REMOVING ALL THE CLUMPS

6. REMOVING FOREIGN PARTICLES IN THE MIXTURE

7. TRANSFERRING THE MIXTURE INTO ANOTHER CONTAINER

8. ALLOWING THE MATERIAL TO HYDRATE FOR TWO-THREE HOURS

9. POURING AND DISTRIBUTING THE FILTERED CLAY WATER IN EACH CLOTH

10. HANGING EACH CLOTH AND LETTING THE EXCESS WATER DRIP

11. LETTING THE FILTERED CLAY SOIL DRY FOR A DAY

12. DISTRIBUTING AND MIXING THE COMPONENTS OF WEIGHED AMOUNTS WITH THE CLAY SOIL

13. LETTING THE SETUPS DRY FOR ANOTHER DAY

14. PUTTING THE THREE MIXTUREX IN EACH WOODEN MOLDER

15. LETTING THE BRICKS DRY IN A SHADED AREA FOR A DAY

16. LETTING THE BRICKS DRY UNDER THE DIRECT SUNLIGHT FOR THREE DAYS

17. LETTING THE BRICK DRY UNDER THE DIRECT SUNLIGHT WITHOUT THE MOLDER

18. THANK YOU FOR WATCHING! presented by: BEATRIX CARMELA ESTRELLA