Download presentation
Presentation is loading. Please wait.
Published byEdgar Long Modified over 9 years ago
2
1 1 Chapter 3 The z-Transform
3
2 2 Consider a sequence x[n] = u[n]. Its Fourier transform does not converge. Consider that, instead of e j , we use re j in the transform, where r ≥ 0 is a real number. Then we have This transform will converge to, provided r>1. z-Transform (1)
4
3 3 In general, we have Let z=re j . Then, the z-transform of a sequence x[n] is defined as with z being a complex variable. z-Transform (2)
5
4 4 Because z is a complex number, we often use the z-plane. When |z|=1, that is, z takes value from the unit circle, the z-transform reduces to the Fourier transform. z-Transform (3) Unit circle Im Re 1 z-plane
6
5 5 Properties of the system can be easily studied and characterized in the z-domain (stability, causality, …). The solution process reduces to a simple algebraic procedure. In the temporal domain, the output sequence is y[n]=x[n]*h[n] (convolution), whereas in the z-domain it becomes Y(z)=X(z)H(z) (multiplication). Why z-Transform
7
6 6 Absolute summability of z-transform It is possible for the z-transform to converge even if the Fourier transform does not. Convergence depends only on |z|. The region of convergence (ROC) consists of all values of z such that the last inequality holds. If the ROC includes the unit circle, the Fourier transform of the sequence converges. Region of Convergence
8
7 7 Consider x[n]=a n u[n]. Because it is nonzero only for n ≥ 0, this is an example of a right-sided sequence. For convergence of X(z), we require Thus, the ROC is the range of values of z for which |az -1 | |a|. Inside the ROC, the infinite series converges to Example – Right-Sided Exponential Sequence (1)
9
8 8 The infinite sum becomes a simple rational function of z inside the ROC. Such a z-transform is determined to within a constant multiplier by its zeros and its poles. For this example, one zero: z=0 (plotted as o); one pole: z=a (plotted as x ). When |a|<1, the ROC includes the unit circle. Unit circle Im Re 1 x z-plane ROC a Example – Right-Sided Exponential Sequence (2)
10
9 9 Consider x[n]= –a n u[–n –1]. Because it is nonzero only for n ≤ –1, this is an example of a left-sided sequence. ROC and Example – Left-Sided Exponential Sequence Unit circle Im Re 1 x z-plane ROC a
11
10 As can be seen from the two examples, the algebraic expression or pole-zero pattern does not completely specify the z-transform of a sequence; i.e., the ROC must also be specified. Notes on ROC
12
11 Consider the sequence ROC and Example – Two-Sided Exponential Sequence Im Re 1/2 x z-plane ROC x –1/3 1/12
13
12 Consider the sequence Then The ROC is determined by which requires Example – Finite-Length Sequence Unit circle Im Re 1 x z-plane 11 th order pole a ROC In this example N = 12 and 0< a <1. x
14
13 Some Common z-Transform Pairs (1)
15
14 Some Common z-Transform Pairs (2)
16
15 Property 1: The ROC is a ring or disk in the z-plane centered at the origin; i.e., 0 ≤r R <|z|<r L ≤ ∞. Property 2: The Fourier transform of x[n] converges absolutely if and only if the ROC of the z-transform of x[n] includes the unit circle. Property 3: The ROC cannot contain any pole. Property 4: If x[n] is a finite-duration sequence, i.e., a sequence that is zero except in a finite interval –∞ < N 1 ≤ n ≤ N 2 < ∞, then the ROC is the entire z-plane, except possibly z = 0 or z = ∞. Properties of the ROC (1)
17
16 Property 5: If x[n] is a right-sided sequence, i.e., a sequence that is zero for n < N 1 < ∞, the ROC extends outward from the outmost (i.e., largest magnitude) finite pole in X(z) to (and possibly include) z = ∞. Property 6: If x[n] is a left-sided sequence, i.e., a sequence that is zero for n > N 2 > –∞, the ROC extends inward from the innermost (smallest magnitude) nonzero pole in X(z) to (and possibly include) z = 0. Properties of the ROC (2)
18
17 Property 7: A two-sided sequence is an infinite-duration sequence that is neither right sided nor left sided. If x[n] is a two-sided sequence, the ROC will consist of a ring in the z-plane, bounded on the interior and exterior by a pole and, consistent with property 3, not containing any poles. Property 8: The ROC must be a connected region. Properties of the ROC (3)
19
18 z-Transform with Different ROC (1) Im Re x z-plane Unit circle x x For a system whose poles are shown in the figure, consider the stability and causality of the system.
20
19 z-Transform with Different ROC (2) Im Re x z-plane ROC x x Right-sided sequence Im Re x z-plane ROC x x Left-sided sequence
21
20 z-Transform with Different ROC (3) Im Re x z-plane ROC x x Two-sided sequence Im Re x z-plane ROC x x Two-sided sequence
22
21 Stability, Causality, and the ROC (1) Im Re x z-plane ROC x x Unit circle Im Re x z-plane x x If the system is stable h[n] is absolutely summable, and therefore has Fourier transform, the ROC must include the unit circle. h[n] is two-sided, and therefore, the system is not causal.
23
22 Stability, Causality, and the ROC (2) h[n] is right-sided. h[n] is not stable. Im Re x z-plane ROC x x Unit circle Im Re x z-plane x x If the system is causal
24
23 Im Re x z-plane Unit circle x x Stability, Causality, and the ROC (3) From the above discussion… There is no ROC that would imply that the system is both stable and causal.
25
24
26
25 Proof of the Initial-Value Theorem Since x[n]=0 for n<0, we have If x[n]=0 for n>0, then we have
27
26 Inspection Method – use your familiar transform pairs The Inverse z-Transform - Inspection Method We know that then we would recognize Example: If we need to find the inverse z-transform of
28
27 When X(z) is expressed as as a ratio of polynomials in z -1 ; i.e., Such z-transforms arise frequently in the study of LTI systems. Partial Fraction Expansion – obtain an alternative expression for X(z) as a sum of simple terms The Inverse z-Transform - Partial Fraction Expansion (1)
29
28 Zeros and poles for There are M zeros and N poles at nonzero positions. In addition, if M > N, there are M – N poles at z = 0, or if N > M, there are N – M zeros at z = 0. For the above expression, the z-transforms always have the same number of zeros and poles in the finite z-plane, and there are no poles or zeros at z = ∞. The Inverse z-Transform - Partial Fraction Expansion (2)
30
29 Note that X(z) can be written in the form where c k ’s are nonzero zeros of X(z), and d k ’s are nonzero poles of X(z). (case 1) If M < N and the poles are all first order, we have Multiplying both sides by (1 – d k z –1 ) and evaluating at z = d k, The Inverse z-Transform - Partial Fraction Expansion (3)
31
30 Example: Rewrite X(z) as where The Inverse z-Transform - Partial Fraction Expansion (4)
32
31 Therefore and Zeros and poles: Two zeros at z = 0, and first order poles at z = 1/4 and 1/2. The Inverse z-Transform - Partial Fraction Expansion (5)
33
32 (case 2) If M ≥ N and the poles are all first order, we have The B r ’s can be obtained by long division of the numerator by the denominator, with the division processing terminating when the remainder is of lower degree than the denominator. The Inverse z-Transform - Partial Fraction Expansion (6)
34
33 Example: Since M=N=2, X(z) can be represented as The constant B 0 can be found by long division The Inverse z-Transform - Partial Fraction Expansion (7)
35
34 (case 3) If X(z) has multiple-order poles. If X(z) has a pole of order s at z=d i and all other poles are first-order, then (there are no B r terms if M < N) with The Inverse z-Transform - Partial Fraction Expansion (8)
36
35 The defining expression for the z-transform is a Laurent series where the sequence values x[n] are the coefficients of z -n. Thus, if the z-transform is given as a power series in the form we can determine any particular value of the sequence by finding the coefficient of the appropriate power of z -1. - We have already used this approach in finding the inverse transform of the polynomial part of the partial fraction expansion when M ≥ N. - This method is also very useful for finite-length sequences where X(z) may have no simpler form than a polynomial in z -1. The Inverse z-Transform - Power Series Expansion (1)
37
36 Example 1 (Finite-length sequence) Express X(z) as we have The Inverse z-Transform - Power Series Expansion (2)
38
37 Example 2 (Inverse transform by power series expansion) Using the power series expansion for log(1+x), with |x|<1, we obtain Therefore The Inverse z-Transform - Power Series Expansion (3)
39
38 Obtain the inverse z-transform of by a different method. Since then We know therefore
40
39 Example 3 (Power series expansion by long division) Carrying out long division Therefore, x[n]= a n u[n]. The Inverse z-Transform - Power Series Expansion (4)
41
40 Example 3 (Power series expansion for a left-sided sequence) Because X(z) at z=0 is infinite, the sequence is zero for n>0. Thus, we divide, so as to obtain a series in powers of z as follows Therefore, x[n]= – a n u[ – n – 1]. The Inverse z-Transform - Power Series Expansion (5)
42
41 Homework (3) 3.7 3.8 3.17 3.27
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.