Presentation is loading. Please wait.

Presentation is loading. Please wait.

1 The problem : M3 too big (and too expensive) for 38A starters The solution : Introduction of a new size intermediate between M2 and M3 Features -Possibility.

Similar presentations


Presentation on theme: "1 The problem : M3 too big (and too expensive) for 38A starters The solution : Introduction of a new size intermediate between M2 and M3 Features -Possibility."— Presentation transcript:

1 1 The problem : M3 too big (and too expensive) for 38A starters The solution : Introduction of a new size intermediate between M2 and M3 Features -Possibility to mount reversing contactors, contactors and relays up to 38A and other execution by customer choice -Degree of protection: IP65 -Fixing holes to the wall internal on the base -Earth terminal and metal plate standard supplied -Sealable base-cover -Grid reference marked by letters and numbers engraved on the interior surface of the cover, simplifying the installation of push buttons and handles ELECTROMECHANICAL STARTERS UP TO 38A M25 ENCLOSURE AND DOL STARTER

2 2 Versions available - Empty enclosures (START/STOP) cULus supplied with MX31 metal plate - Empty enclosures (RESET) cULus supplied with MX31 metal plate - Empty enclosures (PLANE) cULus supplied with MX31 metal plate -38A DOL starters (START/STOP) c omplete with contactors c/w overload cULus -38A DOL starters (RESET) c omplete with contactors c/w overload cULus -38A DOL starters (START/STOP) c omplete with contactors w/o overload cULus -38A DOL starters (RESET) c omplete with contactors w/o overload cULus ELECTROMECHANICAL STARTERS UP TO 38A M25 ENCLOSURE AND DOL STARTER

3 3 ELECTROMECHANICAL STARTERS UP TO 38A Following M3 part numbers are obsolete and replaced by new M25 part numbers

4 4 The problem : some customers demands enclosed starters with a depth lower than M0 (119mm)-M1 (134mm)-M2 (148mm) and with an internal surface larger than the above enclosures to host more devices inside the enclosure The solution : Introduction of a new size named M24 enclosure with a depth of only 98,5 mm but with a large width and height of 175x210mm Features -Possibility to mount reversing contactors, contactors and relays up to 25A and other execution by customer choice -Degree of protection: IP65 -Fixing holes to the wall internal on the base -Earth terminal and metal plate standard supplied -Sealable base-cover ELECTROMECHANICAL STARTERS UP TO 38A M24 ENCLOSURE

5 5 Versions available - Empty enclosures (PLANE) low profile for BG/BF09…BF25 cULus supplied with MX31 metal plate ELECTROMECHANICAL STARTERS UP TO 38A M24 ENCLOSURE


Download ppt "1 The problem : M3 too big (and too expensive) for 38A starters The solution : Introduction of a new size intermediate between M2 and M3 Features -Possibility."

Similar presentations


Ads by Google