1. Dual Pressure Automatic Nozzle
1.5” Nozzle Tip Only
1.5” Nozzle w/Twist-off
1.5” Nozzle

2. Dual Pressure Automatic Nozzle
1.5” Nozzle & Intg/Grip
2.5” Playpipe

3. Dual-Force Series

4. Dual-Force Series

5. Dual-Force Series
Features
Full Automatic dual pressure control nozzle for use on 1.5” to 3.0” attack lines
Operates in standard 100 PSI mode or low pressure mode of about 55 PSI
Red-Low Pressure for maximum flow (interior)
Blue-Higher Pressure for maximum reach & penetration (exterior)
All lightweight materials, hardcoat anodized aluminum
C1024 TIP ONLY Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist “off” position for break-and-extend operations. 3/4" GHT thread is standard.
D1024 TIP ONLY Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist “off” position for break-and-extend operations. 1" NH thread is standard. DS1024 Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. 1" NH swivel is standard. DS1024P Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. Pistol grip is mounted below the valve 1" NH swivel is standard D1040 TIP ONLY Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. This tip only design has a twist “off” position for break-and-extend operations. 3/4" GHT thread is standard. DS1040 Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. 1" NH swivel is standard. DS1040P Dual gallonage nozzle with two flow settings of 10 and PSI. All lightweight materials, hardcoat anodized aluminum. Quick-change rear valve seat, stainless steel shut-off ball and a twist “off” position for positive shut off. Pistol grip is mounted below the valve 1" NH swivel is standard

6. Dual-Force Series
Features
Has a flow range of GPM
Six position detent flow control with exclusive TFT turbulence free slide valve and molded rubber handle
Molded rubber bumper with full fill “power fog” teeth
Flush without shutting down

7. Dual-Force Series
Features
1.5” or 2.5” NH full-time swivel is standard except on tip only models
“Gasket Grabber” inlet screen
Optional color-coded pistol grip
Uses FJ-H and FJ-HMX FOAMJET series for multi-expansion foam applications

8. Dual-Force Series
When Automatic Handline nozzles are compared head to head with competitor’s like models, Task Force Tips products are the automatic choice for quality, performance, and rugged durability.

9. Full Size Automatic Nozzles TFT Handline Series Akron Akromatic®
Dual-Force Series
Full Size Automatic Nozzles
TFT
Handline Series
Akron
Akromatic®
Series
Elkhart
SM-30 Series
Low, Standard (100 psi) & Dual Pressure
Low, Standard, Dual Pressure
Standard
Low, Standard
Turbulence Free Nozzleman Flow Control
Exclusive Slide Valve
Ball Valve
Valve Material
Stainless Steel
Plastic
NFPA Color Coded Pistol Grips
YES No
“Power Fog” Full Fill Fog Pattern
Low & Multi-Expansion Foam Attachments
Low Only
5 Year Warranty and 24 Hour Service Policy

10. Dual-Force Series

11. The finest quality and workmanship
Task Force Tips, Inc
Toll Free : Phone : Fax :
2800 East Evans Ave. Valparaiso, Indiana
The finest quality and workmanship
5 year warranty on all products with 24-hour
in-house repair
Website information on the company, products,
news & events
Training includes Demonstration Vehicles throughout
the U.S.,Videos, CD’s and more
Get Quick Technical Support!in that urgent situation, online