1. Sustainable Roof Systems THE PLANETEERS In collaboration with LionForce Systems Dr. Diana Glawe Professor Kimberly Drennan

2. LionForce Systems  Panelized Pre-Fabricated Houses  Goals: –1. Create structural support and environmental seal –2. Increase 14-ft roof span  20 ft –3. Increase 2-ft overhang  4 ft

3. Roof-to-wall Joint & Span Notice the air gap!

4. Overhang

5. Design Overview

6. Pro Engineer Drawings

7. Simulation with Pro Mechanica

8. Wedge Critical Load

9. Load Calculations

10.  Code: L ~ 30 psf  For: 6 in. thickness, 20 ft. span, 2 ft. overhang, 8:12 pitch –Max stress: 177 psi –Yield stress: 25 to 200 ksi

11. Overhang Recommendations Overhang with Truss Support

12. Internal FBD for member AC External FBD of Overhang Support Bracket Overhang FBDs

13. Thermal Considerations Total R-Value of Panel Trancon Delta Stud2.24 Typical C-Stud1.63 http://www.transconsteel.com/products/ultraframe/stud.asp

14. Thermal Considerations ComponentR-ValueDepthR-Value * Depth Outside Air Film0.17N/A0.17 Steel Roof02"0 Fiberboard2.781.5"4.17 Roof Panel2.244"8.96 1/2" Insulation Sheathing3.21/2"3.2 1/2" Drywall0.45N/A0.45 Inside Air Film0.92N/A0.92 TOTAL17.87

15. Fit Tests Mechanical Fit tests – ABT wall panel, Transcon Roof panel

16. Evaluation of Objectives LionForce goals v. our success  Structural support & environmental seal in wall joint –Success!  Increase span –Success!  Increase overhang –Partial success

17. Thank you! Dr. Glawe Dr. Nickels Professor Drennan Manuel Lionforce Systems Geoffrey Jennings & Transcon Steel Robert Ross & Accelerated Building Technologies