1. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Realization of IEEE802.11s draft standard in NS-3.3 Institute for Information Transmission Problems, Russian Academy of Sciences

2. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Goals of our model: Multi-interface Mesh Point Routing protocol above multi-interface mesh point Portal mesh point (bridging with another wired/wireless network) Peer selection algorithm (using information from all interfaces)

3. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev New conceptions and modules: Layer-2 (MAC) routing network device Layer-2 (MAC) routing protocol 802.11s MAC-layer and peer link management TX-statistics: obtain information about transmitted packets. Used to calculate metric

4. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Conception of L2RoutingNetDevice: For upper layers it’s like a bridge, but can modify received packets (while bridge can’t) Interacts with L2RoutingProtocol, which selects a port to send a packet. Doesn’t depend on the type of routing protocol Forwarding rules for data frames are simple (packet received from port): My packet – send to upper layers Not my unicast packet – pass through routing protocol Broadcast packet – pass through routing protocol and send to upper layers

5. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Conception of L2RoutingProtocol: Interface is the same as in Ipv4RoutingProtocol: just give it a packet with ethernet header and a callback to execute when the route is resolved L2RoutingProtocol receives all packets to be retransmitted or sent by L2RoutingNetDevice L2RoutingProtocol keeps pending packets in a queue (one queue per destination); requires the whole packet and “ethernet header” of the packet L2RoutingProtocol MUST add all needed tags (which can be determined at MAC-layer).

6. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev L2Routing Protocol

7. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev HWMP protocol: Consists of two parts: Main part (Hwmp), inherited from L2RoutingProtocol, stores forwarding information and decides, where to send a packet; all data packets go through this part of protocol State-machine part (HwmpState), attached to MeshWifiMac, handles HWMP action frames and schedules action frames transmission Adds a HwmpTag: retransmitter address, TTL field, sequence number field. Needed by MeshWifiMac to fill MeshHeader.

8. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Structure of HWMP

9. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev IEEE802.11s MAC: Consists of two parts: MeshWifiMac (inherited from WifiMac): Sends beacons Forms all management frames using information elements (received from peer manager and Hwmp protocol) and sends them Sends and receives data frames through active peer links WifiPeerManager (supports interaction with multiple MeshWifiMac classes): Collects information from beacons and initiates peer link management state machine Tells MAC when to send peer link management frames Keeps state machine for each peer link Implements beacon collision avoidance mechanism Implements an algorithm to choose peers, because of multi- interface support

10. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Scheme of PeerManager and MeshWifiMac

11. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev TX-statistics: how we form it Connected WifiRemoteStationManager class, and the following events are passed to TX- statistics module: Each event like ACK (ReportDataOk method), or retransmission success/failure (ReportDataFailed, ReportFinalDataFailed methods), is passed to TX- statistics module Each time we request a wifi mode for a packet – we give the length of the packet to statistics module Statistics is calculated for (2-d distribution): Each transmission rate Each packet length – you set an interval length (in bytes) and statistics is stored for each packet length

12. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev TX-statistics: what does it keep TX-statistics keeps the following (2-d distribution for each value): Number of successfully transmitted packets and bytes Number of retransmitted packets and bytes Number of failed packets and bytes The same for packets sent with CTS/RTS mechanism

13. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Conclusion: The following things are beyond draft 2.07: –Multi-interface –Peer link manager handles many interfaces The following thing we have not implemented yet: –Mesh portal is not implemented now –Link metric report is not implemented now

14. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Our code You can see our code here (mercurial repository): http://forge.wenos.ru/hgprojects/ns3dev/

15. Wireless Software R&D Group, IITP RAS Kirill Andreev, Aleksey Kovalenko, Dmitriy Lakontsev Thank you for attention