Presentation is loading. Please wait.

Presentation is loading. Please wait.

Tuesday, November 16, 2010G. Favre EN/MME1 PIMS prototype construction experience Details of the construction procedure elaborated by CERN for the PIMS.

Published byRuth Hodge Modified over 9 years ago

Similar presentations

Presentation on theme: "Tuesday, November 16, 2010G. Favre EN/MME1 PIMS prototype construction experience Details of the construction procedure elaborated by CERN for the PIMS."— Presentation transcript:

1 Tuesday, November 16, 2010G. Favre EN/MME1 PIMS prototype construction experience Details of the construction procedure elaborated by CERN for the PIMS prototype

2 Tuesday, November 16, 2010G. Favre EN/MME2 Construction sequence for standard rings type 3

3 Tuesday, November 16, 2010G. Favre EN/MME3 Table 1: Construction sequence for standard rings type 3 (1/2) pieces p. cav. drawing numbersequenceresponsibility/task sub parts 4SPLACPMT0001Tuner port machining (this part integrates a backing support designed to receive the welding root) IPJ - task 1 4SPLACPMB0037Flange rough machining, stabilization, final machining IPJ - task 1 4SPLACPMT0002Vacuum brazingIPJ - task 1 main parts 4SPLACPMT00121. Ring rough machining (+1 mm)IPJ - task 1 2. Milling of port apertures according to the requirements by FZJ IPJ - task 1 3. CleaningIPJ - task 1 4. Packing and transport of rings and port tubes to FZJ IPJ - task 1 45. Welding of port tubesFZJ - task 2 6. Leak test of portsFZJ - task 2 7. Packing and transport to IPJFZJ/IPJ - task 2

4 Tuesday, November 16, 2010G. Favre EN/MME4

5 Tuesday, November 16, 2010G. Favre EN/MME5

6 Tuesday, November 16, 2010G. Favre EN/MME6

7 Tuesday, November 16, 2010G. Favre EN/MME7 + 2 mm - 2 mm Rough machining: oversize + 1 mm

8 Tuesday, November 16, 2010G. Favre EN/MME8

9 Tuesday, November 16, 2010G. Favre EN/MME9 pieces p. cav. drawing numbersequenceresponsibility/task main parts SPLACPMB00188. Port backing support machiningIPJ - task 3 9. X-ray testingIPJ – task 3 10. Leak test of portsIPJ - task 3 SPLACPMB001811. Ring final machiningIPJ - task 3 12. CleaningIPJ - task 3 13. Metrological reportIPJ - task 3 14. Packing and transport to CERNIPJ - task 3 Table 1: Construction sequence for standard rings type 3 (2/2)

10 Tuesday, November 16, 2010G. Favre EN/MME10

11

12 Tuesday, November 16, 2010G. Favre EN/MME12 Construction sequence for pick-up rings

13 Tuesday, November 16, 2010G. Favre EN/MME13 Table 2: Construction sequence for pick-up rings (1/2) pieces p. cav. drawing numbersequenceresponsibility/ tasks sub parts 2SPLACPMT0001Tuner port machining (this part integrates a backing support designed to receive the welding root) IPJ - task 1 2SPLACPMB0037Flange rough machining, stabilization, final machining IPJ - task 1 2SPLACPMT0002Vacuum brazingIPJ - task 1 2SPLACPMT0003Pick-up port machining (this part integrates a backing support designed to receive the welding root) IPJ - task 1 2SPLACPMB0038flange rough machining, stabilisation, fine machining IPJ - task 1 2SPLACPMT0002, SPLACPMT0004 Vacuum brazingIPJ - task 1

14 Tuesday, November 16, 2010G. Favre EN/MME14

15 Tuesday, November 16, 2010G. Favre EN/MME15

16 Tuesday, November 16, 2010G. Favre EN/MME16

17 Tuesday, November 16, 2010G. Favre EN/MME17

18 Tuesday, November 16, 2010G. Favre EN/MME18

19 Tuesday, November 16, 2010G. Favre EN/MME19

20 Tuesday, November 16, 2010G. Favre EN/MME20 Table 2: Construction sequence for pick-up rings (2/2) pieces p. cav. drawing number sequenceresponsibility/ tasks main parts 21. Ring rough machining (+1 mm)IPJ - task 1 SPLACPMT00132. Milling of port apertures according to the requirements of FZJ IPJ - task 1 3. CleaningIPJ - task 1 4. Packing and transport of rings and port tubes to FZJ IPJ - task 1 25. Welding of port tubesFZJ - task 2 6. Leak test of portsFZJ - task 2 7. Packing and transport to IPJFZJ/IPJ - task 2 SPLACPMB00208. Port backing support machiningIPJ - task 3 9. X-ray testingIPJ – task 3 10. Leak test of portsIPJ - task 3 SPLACPMB002011. Ring final machiningIPJ - task 3 12. CleaningIPJ - task 3 13. Metrological report (the ring shall be unclamped to carry out the measurements) IPJ - task 3 14. Packing and transport to CERNIPJ - task 3

21 Tuesday, November 16, 2010G. Favre EN/MME21

22 Tuesday, November 16, 2010G. Favre EN/MME22

23 Tuesday, November 16, 2010G. Favre EN/MME23 Construction sequence of central ring type 4

24 Tuesday, November 16, 2010G. Favre EN/MME24 Table 3: Construction sequence of central ring type 4 pieces p. cav. drawing numbersequenceresponsibility Sub parts 1SPLACPMB0025square flange: rough machining, stabilization, final machining IPJ - task 1 1SPLACPMB0026tube machiningIPJ - task 1 1SPLACPMB0027pick-up tube machiningIPJ - task 1 1SPLACPMB0028fitting elbows machiningIPJ - task 1 1SPLACPMB0029nipples machiningIPJ - task 1 1SPLACPMB0037flange rough machining, stabilisation, final machining IPJ - task 1 1SPLACPMB0038flange rough machining, stabilisation, final machining IPJ - task 1

25 Tuesday, November 16, 2010G. Favre EN/MME25

26 Tuesday, November 16, 2010G. Favre EN/MME26

27 Tuesday, November 16, 2010G. Favre EN/MME27

28 Tuesday, November 16, 2010G. Favre EN/MME28

29 Tuesday, November 16, 2010G. Favre EN/MME29

30 Tuesday, November 16, 2010G. Favre EN/MME30

31 Tuesday, November 16, 2010G. Favre EN/MME31

32 Tuesday, November 16, 2010G. Favre EN/MME32 Table 3: Construction sequence of central ring type 4 pieces p. cav. drawing numbersequenceresponsibility Main parts 1SPLACPMT00141. Ring rough machining (+1 mm)IPJ - task 1 2. CleaningIPJ - task 1 3. Stabilisation (heat treatment)IPJ - task 1 SPLACPMT00154. Ring rough machining (+0.5 mm)IPJ - task 1 5. CleaningIPJ - task 1 6. Stabilisation (heat treatment)IPJ - task 1 SPLACPMB00247. Ring final machiningIPJ - task 1 8. CleaningIPJ - task 1 9. Metrology (the ring shall be unclamped to carry out the measurements) IPJ - task 1 SPLACPMB001710. Brazing of ports, fitting elbows, nipples and square flange IPJ - task 1 11. Leak testIPJ – task 1 12. Water pressure testIPJ – task 1 13. MetrologyIPJ – task 1 11. Packing and Transport to CERNIPJ - task 3

33 Tuesday, November 16, 2010G. Favre EN/MME33

34 Tuesday, November 16, 2010G. Favre EN/MME34

35 Tuesday, November 16, 2010G. Favre EN/MME35

36 Tuesday, November 16, 2010G. Favre EN/MME36

37 Tuesday, November 16, 2010G. Favre EN/MME37

38 Tuesday, November 16, 2010G. Favre EN/MME38 Construction sequence of central disc type 1, type 3 and & disc type 3

39 Tuesday, November 16, 2010G. Favre EN/MME39 Table 4: Construction sequence of central disc type 1, type 3 and & disc type 3 pieces p. cav. drawing numbersequenceresponsibility 21. Disc rough machining including coupling slots (all +1 mm) IPJ - task 1 2. Drilling of cooling circuitsIPJ - task 1 3. Installation of temporary threaded plugs to protect cooling circuits during final machining and cleaning IPJ - task 1 4. Final machiningIPJ - task 1 5. CleaningIPJ – task 1 6. Leak test of cooling circuitsIPJ – task 1 7. Pressure test of the cooling circuitsIPJ – task 1 8. Metrology control (the disc shall be unclamped to carry out the measurements) IPJ - task 1 9. Packing and Transport to CERNIPJ - task 3

40 Tuesday, November 16, 2010G. Favre EN/MME40 Rough machining: oversize + 1 mm

41 Tuesday, November 16, 2010G. Favre EN/MME41 Rough machining: oversize + 1 mm

42

Download ppt "Tuesday, November 16, 2010G. Favre EN/MME1 PIMS prototype construction experience Details of the construction procedure elaborated by CERN for the PIMS."

Similar presentations

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,

The HiLumi LHC Design Study (a sub-system of HL-LHC) is co-funded by the European Commission within the Framework Programme 7 Capacities Specific Programme,
RF Cavity Module G. Gosling Dept. of Mechanical Engineering Imperial College London.

RF Cavity Module G. Gosling Dept. of Mechanical Engineering Imperial College London.
MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.

MICE RF and Coupling Coil Module Outstanding Issues Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 26, 2004.
Manual Flo-tap Installation Instructions

Manual Flo-tap Installation Instructions
Compression Fittings Internal nut type. Compression fittings Rugged and durable. Firm joint using all brass construction For use with plastic and metal.

Compression Fittings Internal nut type. Compression fittings Rugged and durable. Firm joint using all brass construction For use with plastic and metal.
ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.

ATD Assembly. ATD Assembly #1 Dewar Assembly #1 Status: Dewar has been completely assembled and vacuum tested. No vacuum leaks were detected on the outer.
AIR COOLER Heat Exchanger

"AIR COOLER" Heat Exchanger
STOPKIT Test - Ø14” & Ø6” Pipe Spools Set up 14”Ø Pipe 6mm Hole at Plain Pipe6”Ø Elbow 4mm Hole at Weld Heat Affected Zone Note:- Both pipe spools were.

STOPKIT Test - Ø14” & Ø6” Pipe Spools Set up 14”Ø Pipe 6mm Hole at Plain Pipe6”Ø Elbow 4mm Hole at Weld Heat Affected Zone Note:- Both pipe spools were.
MICE RF Cavity Design and Fabrication Update Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.

MICE RF Cavity Design and Fabrication Update Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 27, 2004.
Status of the LARP Phase II Secondary Collimator Prototype 30 September 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US.

Status of the LARP Phase II Secondary Collimator Prototype 30 September 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US.
AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.

AMS-02 tracker mechanics status of assembly and integration at UniGe Outer planes: - Tests of evaporator (cooling loop) integration - Tools to develop.
AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.

AMS-02 tracker mechanics status of assembly and integration Inner tracker integration completion: - Assembly and cabling - Temperature and magnetic field.
Non-welded Window Option Edgar L. Black IIT August 15,2003.

Non-welded Window Option Edgar L. Black IIT August 15,2003.
TAGGER MAGNET DESIGN Presented by Tim Whitlatch Hall D Tagger Magnet Design Review July 10, 2009 1.

TAGGER MAGNET DESIGN Presented by Tim Whitlatch Hall D Tagger Magnet Design Review July 10,
Stator Plan & Schedule Chris Booth 2 nd March 2009 3 stators to construct for mid-April. One complete coil assembly recovered from ISIS drive. Coils recoverable.

Stator Plan & Schedule Chris Booth 2 nd March stators to construct for mid-April. One complete coil assembly recovered from ISIS drive. Coils recoverable.
Status of the MuCool Cavity Prototype Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 21, 2005.

Status of the MuCool Cavity Prototype Steve Virostek Lawrence Berkeley National Laboratory MICE Collaboration Meeting October 21, 2005.
Status of the LARP Phase II Secondary Collimator Prototype 14 October 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC.

Status of the LARP Phase II Secondary Collimator Prototype 14 October 2013 LHC Collimation WG Meeting Tom Markiewicz/SLAC BNL - FNAL- LBNL - SLAC US LHC.
Improvements for next parts PIMS production meeting 26-27 February 2013 Rolf Wegner.

Improvements for next parts PIMS production meeting February 2013 Rolf Wegner.
Aluminum bellows for experiments

Aluminum bellows for experiments
ENGINEERING DESIGN AND FABRICATION OF PETS V. Soldatov¹, D. Gudkov¹, I. Syratchev², A. Samoshkin¹, G. Riddone², A. Olyunin¹, S. Atieh² 1 – JINR, Dubna,

ENGINEERING DESIGN AND FABRICATION OF PETS V. Soldatov¹, D. Gudkov¹, I. Syratchev², A. Samoshkin¹, G. Riddone², A. Olyunin¹, S. Atieh² 1 – JINR, Dubna,

Similar presentations

Ads by Google