Download presentation
Presentation is loading. Please wait.
Published byMatthew Camron Thomas Modified over 9 years ago
1
Sarah Newton University of Oregon Applied Physics
2
Many applications in Chemistry and Medicine 1940's- First Signs of NMR Bloch, Purcell, and others noticed the H nuclei had magnetic properties. It could absorb RF energy when placed in a field of a strength specific to the identity of the nuclei. When absorption occurs, the nucleus is described as being in resonance. Background
3
Simulate different circuits to give the best resonance Develop a detector Built within constraints: Resonance no higher than 13MHz. See CW See Pulsed Compare and analyze their similarities and differences Objectives
4
NMR and Optical Pumping have the same basic concept Optical Pumping It is a two level system that electronically excites the constituents of a medium into another energy state. i.e. Laser Connection to Optics
5
Type of Spectroscopy that manipulated the magnetic properties of nuclei within a sample That manipulation leads to finding the chemical properties and environment contained within the sample. What is NMR?
6
CW(Continuous Wave) NMR Experiments have a varying frequency of radiation at constant magnetic field and measuring the absorption of radiation by the different nuclei. Pulsed(Fourier Transform) NMR Resonances are not measured one after another but all nuclei are excited at the same time by a radio frequency pulse. Excited spins emit the absorbed radiation after the pulse. Intensities of several frequencies are calculated and framed into spectrum. CW/Pulsed NMR
7
Circuit Sim
8
Sims Graph
9
Circuit
10
Magnet is powered up Sample lowered into quartz vial (connected to the circuit.) RF gain(from radio receiver) increased to max Capacitor dials on bridge circuit turned to minimize RF gain Amps of DC power supply adjusted until a signal becomes visible on the oscilloscope. The small function generator provides a “wobble” on the coils while the older generator is the driving unit Methodology
11
Intrumentation
12
(What Should have happened) In the CW -fixed frequency and varying current -Able to observe the resonant signal (“wiggle”) at individual frequencies in succession In pulsed -A short pulse containing a range of frequencies -All nuclei spins are excited( with a range of frequencies) -Induces a current creating an electrical signal response Results
13
Success!!! Circuit works and is fully functional But.. Due to the strange disappearance and reappearance of resonance at different frequencies we will go back to the drawing board. Conclusion/Summary
14
Simulations Build a better circuit Run both CW and Pulse NMR Future Work
15
Material Science Institute Stephen Gregory and Brian Boggs Acknowledgements
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.