Download presentation
Presentation is loading. Please wait.
Published byPamela Hart Modified over 9 years ago
1
1 1 KPS Leak Detection No maintenance and perfect for retro-fit
2
2 KPS Leak Detection – KP 315 What is the worst enemy of service stations ? Leakages Water entry in tanks What is the best solution against these threats : Leak detection system
3
3 KPS Leak Detection – KP 315 How it works : with double wall piping installation
4
4 Connections to the piping The leak detection unit is placed at the lowest point of the piping system, one in each tank sump Polyamide tubing connects from secondary containment of the piping to the leak detection unit The manifold is used to connect to multiple pipes If primary pipe is leaking, fuel will flow by gravity down to the leak detection unit
5
5 The Leak Detection Unit A sensor inside the unit reacts to the presence of fluids Fuel of any sort = leakage from primary pipe to secondary Water = leaking secondary containment Proximity Capacitive sensor
6
6 KPS Leak Detection – KP 315 Non-maintenance No pressure/vaccum Easy integration with tank gauging systems
7
7 The Leak Detection Unit Example of installed leak detection box : retrofit
8
8 The Alarm Unit Test buttons Status LED Power supply Alarm Mute Sensors connections Module : Isolated switch amplifiers Intrinsic safely EExi Power supply Fuses, and relay
9
9 Applications: Stand-alone Local installation with audio and visual alarm Up to 5 pipes connected to each leak detection unit To monitor up to 9 pipes, add an extra manifold Up to 6 sumps monitored by one alarm unit. For more, a extra unit can be added
10
10 Applications: Telematic Surveillance The alarm unit is prepared for GSM connection GSM module Backoffice server Filling station leak detection Notification and surveillance
11
11 Applications: Connected to ATG systems Connect to tank gauging systems or other external monitoring systems via the outgoing signal relay NO/NC – potential free switch with breaking or closing function : STOP the submerged pumps system for instance
12
12 Advantages of KP 315 Leak Detection System Immediate alarm as soon as liquid reaches the sensor - No minimum leak rate or volume Any leakage is contained by the system and will not contaminate the sump (compare with Veeder-Root containment sump sensors) No restrictions on pipe volume Works for all secondary contained pipes (steel, fibreglass, flexible) Quick reset in case of alarm Disconnect the tubing, empty the container and connect tubing again Ready to go! No drying times or recalibration of systems. Easy to install One cable from the sump to the alarm unit/building Suitable for retro-fit applications
13
13 Approval Approved to EN 13160 – Leak Detection Systems
14
14 Suggested Positioning As an add-on to OPW SiteSentinel As an add-on to existing Veeder-Root systems For retro-fit where leak detection is missing Stand-alone as a low investment solution Where low/no maintenance costs are required
15
15 Thank you!
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.