1. Jay Dhamsaniya Rakesh Adroja Department of E & C Engineering Institute of Technology Nirma University Ahemedabad OCT - 2011

2. Definition : An organic light emitting diode (OLED) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a film of organic compounds that emits light when an electric current passes through it.

3.  2 – layer structure  Active & In-active condition  Material used in layer o Anode (+)  Indium tin oxide (ITO) o Cathode (-)  Metals such as aluminium (Al) and calcium (Ca) o Emissive layer  Alq3 which emits radiation in the range of green light o Conductive layer  Diamine

4.  For efficient emission  recombination zone should be in the middle of the organic emissive layer  In organic semiconductors, holes are more mobile than electrons  Recombination happens closer to the emissive layer  Problem solution : Multi layer structured OLED

5. Electron-hole recombination zone is shifted in the middle of the emissive layer

7. [A] Classification according to Organic Material used 1.SMALL MOLECULE OLEDs: First developed at Eastman Kodak by Dr. Ching W. Tang Example: Alq 3 2. POLYMER MOLECULE OLEDs: Example: poly(p-phenylene vinylene) 3. PHOSPHORESCENT MATERIALS OLEDs: Example: Ir(mppy) 3, It is a phosphorescent dopant which emits green light

8. [B] Classification according to Transparency 1.Bottom or top emissive OLEDs: One of the electrode is kept transparent

9. [B] Classification according to Transparency 2.Transparent OLEDs: Both electrodes are kept transparent

10. [C] FOLDABLE OLED Flexible substrate is used It is prepared by roll-to-roll patterning method

11. [C] FOLDABLE OLED  FOLEDs offer Revolutionary Features for Display: 1. Flexibility 2. Ultra-lightweight, thin form 3. Durability 4. Cost-effective processing

12. [D] CLASSIFICATION ACCORDING TO PIXEL FORMATION USED 1.Active Matrix OLEDs (AM-OLEDs):  Display is a set of pixel  Pixel is a single oled  Individual Cathode and Anode  Biasing current provided to pixel, is controlled by TFT according to information  A/D: Reduces power consumption  D/A: Patterning/Fabrication cost is high

13. [D] CLASSIFICATION ACCORDING TO PIXEL FORMATION USED 2. Passive Matrix OLEDs (PM-OLEDs):  Cathode and Anode are kept common for each rows/columns  Pixel formed at the intersection

14.  Advantages: 1. Very thin panel of approximately 1mm 2. Low power consumption 3. High brightness 4. High contrast ratio of 10,000 : 1 5. Wide viewing angle of 170  6. No environmental drawbacks 7. Foldable display panel

15.  Advantages of OLED Display over TFT-LCD Display: 1. Contrast Ratio  Higher contrast ratio than TFT-LCD display  Better impression for higher brightness Contrast Ratio (Sunlight Readable) ConditionOLEDTFT-LCD Dark room> 10,000 : 1300 : 1 Rainy400130 Cloudy19010 Sunlight504

16. 2.Viewing Angle  Higher viewing angle up to 170  for constant contrast ratio  Graph: contrast V/S viewing angle

17. 3. Response Time  Fast time response in order of <50 us  Comparison by graphical point of view

18. 4. Backlight Function  No backlight required in OLED display  During black background OLED is turned OFF  In LCD backlight is still required

19. 4. Power Efficiency  OLED display is more power efficient than TFT-LCD display  For the same power OLED display is more brighter

20. 1.Limited life time 2.Color balancing issues 3.Water damage 4.Power consumption

22.  Light weight  Thin  Unbreakable  Low cost processing potential for Roll-to-Roll patterning  New product possibility

23. There are many other opportunities for application of organic thin- film semiconductors and challenges are remain for development that is shown following table. ChallengesOpportunities Matireals blue & white EL, low-cost ITO alternatives Process cost high OLED Industry still in the early stage of development Driving Tech for AMOLED is still under development White OLED high performance WOLED is needed Solution Printing tech is viable for large size and low cost FOLED will be very attractive for application in conformal, fordable or even flexible lighting and displays