1. Weds., Jan. 29, 2014PHYS 1442-004, Dr. Andrew Brandt 1 PHYS 1442 – Section 004 Lecture #5 Wednesday January 29, 2014 Dr. Andrew Brandt CH 17 Electric Potential due to Point Charges Shape of the Electric Potential Equi-potential Lines and Surfaces Electron-volt Capacitance

2. Announcements a) Avg was 81 on HW. Good job, you should dominate that material on the test. b) New HW assigned on ch 17 Weds., Jan. 29, 2014 2 PHYS 1442-004, Dr. Andrew Brandt

3. Weds., Jan. 29, 2014 3 PHYS 1442-004, Dr. Andrew Brandt Electric Potential and Potential Energy The electric potential difference gives potential energy (or the possibility to do work) based on the charge of the object. So what is happening in batteries or generators? –They maintain a potential difference. –The actual amount of energy used or transformed depends on how much charge flows. –How much is the potential difference maintained by a car’s battery? 12Volts –If for a given period, 5C charge flows through the headlight lamp, what is the total energy transformed? E tot =5C*12V=60 What is the unit? –If it is left on twice as long? E tot =10C*12V=120J. C*J/C=J (Joules)

4. Weds., Jan. 29, 2014 4 PHYS 1442-004, Dr. Andrew Brandt Example 17 – 2 Electrons in a TV tube: Suppose an electron in the picture tube of a television set is accelerated from rest through a potential difference V ba =+5000V. (a) What is the change in potential energy of the electron? (b) What is the speed of the electron (m=9.1x10 -31 kg) as a result of this acceleration? (c) Repeat for a proton (m=1.67x10 -27 kg) that accelerates through a potential difference of V ba =-5000V. (a) What is the charge of an electron? – So what is the change of its potential energy?

5. Weds., Jan. 29, 2014 5 PHYS 1442-004, Dr. Andrew Brandt Example 17 – 2 (b) Speed of the electron? –The entire potential energy of the electron is transformed into kinetic energy. Thus the equation is (c) Speed of a proton that accelerates through V=-5000V?

6. Weds., Jan. 29, 2014 6 PHYS 1442-004, Dr. Andrew Brandt Electric Potential and Electric Field The effect of a charge distribution can be described in terms of electric field or electric potential. –What kind of quantities are the electric field and the electric potential? Electric Field: Electric Potential: –Since electric potential is a scalar quantity, it often can make problem solving easier. Vector Scalar

7. Weds., Jan. 29, 2014 7 PHYS 1442-004, Dr. Andrew Brandt 50V 5cm Example 17 – 3 Uniform electric field obtained from voltage: Two parallel plates are charged to a voltage of 50 V. If the separation between the plates is 5.0 cm, calculate the magnitude of the electric field between them, ignoring any fringe effects. What is the relationship between electric field and the potential for a uniform field? Solving for E

8. Weds., Jan. 29, 2014 8 PHYS 1442-004, Dr. Andrew Brandt Electric Potential due to Point Charges Since only the differences in potential have physical meaning, we can choose at. The electrical potential V at a distance r from a single point charge is So the absolute potential from a single point charge depends only on the magnitude of the point charge and the distance from it

9. Weds., Jan. 29, 2014 9 PHYS 1442-004, Dr. Andrew Brandt What are the differences between the electric potential and the electric field? –Electric potential Electric potential energy per unit charge Inversely proportional to the distance Simply add the potential from each of the charges to obtain the total potential from multiple charges, since potential is a scalar quantity –Electric field Electric force per unit charge Inversely proportional to the square of the distance Need vector sums to obtain the total field from multiple charges Potential for a positive charge is large near the charge and decreases to 0 at large distances. Potential for the negative charge is small (large magnitude but negative) near the charge and increases with distance to 0 Properties of the Electric Potential

10. Weds., Jan. 29, 2014 10 PHYS 1442-004, Dr. Andrew Brandt Shape of the Electric Potential So, what does the electric potential look like as a function of distance? –What is the formula for the potential by a single charge? Positive Charge Negative Charge A uniformly charged sphere would have the same potential as a single point charge. What does this mean? Uniformly charged sphere behaves like all the charge is on the single point in the center.

11. Weds., Jan. 29, 2014 11 PHYS 1442-004, Dr. Andrew Brandt Since we obtain Example 17.5 Work to bring two positive charges close together: What minimum work is required by an external force to bring a charge q=3.00 μ C from a great distance away ( ) to a point 0.500 m from a charge Q=20.0 μ C? What is the work done by the electric field in terms of potential energy and potential? In other words, the external force must input work of +1.08J to bring the charge 3.00  C from infinity to 0.500m from the 20.0  C charge.

12. Weds., Jan. 29, 2014 12 PHYS 1442-004, Dr. Andrew Brandt Since we obtain More on Example 17-5 Work to bring two positive charges close together: What minimum work is required by an external force to bring a charge q=3.00 μ C from a great distance away ( ) to a point 0.500 m from a charge Q=20.0 μ C? What is the work done by the electric field in terms of potential energy and potential? In other words, the external force must input work of +1.08J to bring the charge 3.00  C from infinity to 0.500m from the 20.0  C charge.

13. Weds., Jan. 29, 2014 13 PHYS 1442-004, Dr. Andrew Brandt Electrostatic Potential Energy: Two charges What is the electrostatic potential energy of a configuration of charges? (Choose V=0 at r=  –If there are no other charges around, a single point charge Q1 Q1 in isolation has no potential energy and feels no electric force If a second point charge Q2 Q2 is to a distance r 12 from Q1 Q1,the potential at the position of Q2 Q2 is The potential energy of the two charges relative to V=0 at r=  is -- This is the work that needs to be done by an external force to bring Q2Q2 from infinity to a distance r 12 from Q1.Q1. –It is also a negative of the work needed to separate them to infinity.

14. Weds., Jan. 29, 2014 14 PHYS 1442-004, Dr. Andrew Brandt Electrostatic Potential Energy: Three Charges So what do we do for three charges? Work is needed to bring all three charges together –There is no work needed to bring Q1 Q1 to a certain place without the presence of any other charge –The work needed to bring Q2 Q2 to a distance to Q1 Q1 is –The work need to bring Q3 Q3 to a distance to Q1 Q1 and Q2 Q2 is So the total electrostatic potential of the three charge system is

15. Weds., Jan. 29, 2014 15 PHYS 1442-004, Dr. Andrew Brandt Equi-potential Surfaces Electric potential can be visualized using equipotential lines in 2-D or equipotential surfaces in 3-D Any two points on equipotential surfaces (lines) have the same potential What does this mean in terms of the potential difference? –The potential difference between the two points on an equipotential surface is 0. How about the potential energy difference? –Also 0. What does this mean in terms of the work to move a charge along the surface between these two points? –No work is necessary to move a charge between these two points.

16. Weds., Jan. 29, 2014 16 PHYS 1442-004, Dr. Andrew Brandt Equi-potential Surfaces An equipotential surface (line) must be perpendicular to the electric field. Why? –If there are any parallel components to the electric field, it would require work to move a charge along the surface. Since the equipotential surface (line) is perpendicular to the electric field, we can draw these surfaces or lines easily. There can be no electric field inside a conductor in static case, thus the entire volume of a conductor must be at the same potential. So the electric field must be perpendicular to the conductor surface. Point charges Parallel Plate Just like a topographic map

17. Weds., Jan. 29, 2014 17 PHYS 1442-004, Dr. Andrew Brandt Electrostatic Potential Energy: electron Volt What is the unit of electrostatic potential energy? –Joules Joules is a very large unit in dealing with electrons, atoms or molecules For convenience a new unit, electron volt (eV), is defined –1 eV is defined as the energy acquired by a particle carrying the charge equal to that of an electron (q=e) when it moves across a potential difference of 1V. –How many Joules is 1 eV then? eV however is not a standard SI unit. You must convert the energy to Joules for computations.

18. Weds., Jan. 29, 2014 18 PHYS 1442-004, Dr. Andrew Brandt Capacitors (or Condensers) What is a capacitor? –A device that can store electric charge without letting the charge flow What does it consist of? –Usually consists of two oppositely charged conducting objects (plates or sheets) placed near each other without touching –Why can’t they touch each other? The charges will neutralize each other Can you give some examples? –Camera flash, surge protectors, computer keyboard, binary circuits… How is a capacitor different than a battery? –Battery provides potential difference by storing energy (usually chemical energy) while the capacitor stores charge but very little energy.

19. 19 Capacitors A simple capacitor consists of a pair of parallel plates of area A separated by a distance d. –A cylindrical capacitors are essentially parallel plates wrapped around as a cylinder. Symbols for a capacitor and a battery: –Capacitor -||- –Battery (+) -| l - (-) Circuit Diagram Weds., Jan. 29, 2014PHYS 1442-004, Dr. Andrew Brandt

20. Weds., Jan. 29, 2014 20 PHYS 1442-004, Dr. Andrew Brandt What do you think will happen if a battery is connected (voltage is applied) to a capacitor? –The capacitor gets charged quickly, one plate positive and the other negative with an equal amount. of charge Each battery terminal, the wires and the plates are conductors. What does this mean? –All conductors are at the same potential. –the full battery voltage is applied across the capacitor plates. So for a given capacitor, the amount of charge stored in the capacitor is proportional to the potential difference V ba between the plates. How would you write this formula? –C is a proportionality constant, called capacitance of the device. –What is the unit? Capacitors C/VorFarad (F) C is a property of a capacitor so does not depend on Q or V. Normally use  F or pF.

21. Weds., Jan. 29, 2014 21 PHYS 1442-004, Dr. Andrew Brandt Determination of Capacitance C can be determined analytically for capacitors w/ simple geometry and air in between. Let’s consider a parallel plate capacitor. –Plates have area A each and separated by d. d is smaller than the length, so E is uniform. –For parallel plates E=  0, where  is the surface charge density. E and V are related So from the formula: –What do you notice? C only depends on the area (A) and the separation (d) of the plates and the permittivity of the medium between them.