1. Mid-Term Pretest Review
Engineering Drafting 2
Architecture 2

2. Review of Commands… Intro to AutoCAD Line Erase Object Selection
File (Lesson 2)
New QSave
Open Dtext
Save Circle
Save As Plot
Coords (Lesson 3)
Absolute
Relative
Relative Polar
Using Zoom (Lesson 4)
Zoom- All
Extents
Window
Previous
Realtime
Pan
Regen

3. Commands Continued Drawing (Lesson 5) Arc Rectangle Ellipse Polygon
Pline
Donut
Fill
Point
Drafting Tools (lesson 6)
Grid
Snap
Ortho
Polar Snap
Osnap
Direct Entry Method

4. Commands Continued… More tools… (Lesson 7) Xline Ray Dline Revcloud
Area
Dlist
List ID
Text Window
Modify Toolbar (Lesson 8)
Object Selection
Move
Copy
Copy Base
Paste Block
Paste Orig
Offset
Rotate
Scale

5. Questions….
1. This Commands saves a drawing under a new or different name…
SAVE AS
2. When working with a drawing… how often should it be saved?
After every major change, or every 10 minutes
3. On the Cartesian Coordinate System… What is the coordinates of the origin? 0,0 4. What is the direction of positive angular measurement? CCW

6. Questions…
5. The line at the bottom of the AutoCAD window where you can enter dialog is called the… Command Line 6. The left mouse button is used for… Selecting or Picking
7. Using the right button on the mouse is the same as using the ______key. 8. We can cancel any command by using the ______ key on the keyboard.
Enter
Escape

7. Questions…
9. To Repeat the last command we can use the ________ on the keyboard. 10. The default for the Arc command is the ____ pt method
Bonus Question.
If I am still alive, but I’m barely breathing…
and I just prayed to a God that I don’t believe in… If I got time… what did she get? 3
Freedom….

8. The absolute value of a location
Back to the Questions….
11. To change the coordinate location of an entity from one place on the drawing to another… we use the _____command.
12. We can use the ID Point command to find what?
The absolute value of a location
13.Can you name two of the three ways to invoke the LINE command?
L enter in the CL
Draw--- Line from menu
Line Command from Tool bar
14. To draw a pentagon, we can use the ________ command.
15. What is the difference between circumscribed and inscribed?
Move
Polygon

9. Question Continued…
16. Why are only certain letters capitalized on words in the command line? They determine the minimum entry to invoke that prompt. 17. What is the command used to draw a circle viewed at an angle? The Ellipse Command
18. What is an XLINE? A construction line of infinite lengths 19. How does that differ from using the RAY command? The ray is only infinite in one direction. The default for creating a circle is… Center Point/
Radius

10. 22.To gain a closer view of an entity the ______ command is used.
Questions….
20.What is the command to remove or discard an entity?
Erase Command
Bonus!!!!!! Free pass to the Bathroom!
“They say that bad things happen for a reason, But no wise words are going to stop the bleeding… Cause she moved on while I’m still…. ? “
21.What is the difference between a Crossing Window and a Selection Window?
CW selects everything it touches, and SW selects everything it encases.
22.To gain a closer view of an entity the ______ command is used.
23. How do you show an object has been revised?
Zoom
Grieving
Revcloud

11. Do you have any questions?
Line
Erase
Object Selection
New QSave
Open Dtext
Save Circle
Save As Plot
Absolute
Relative
Relative Polar
Zoom- All
Extents
Window
Previous
Realtime
Pan
Regen
Arc
Rectangle
Ellipse
Polygon
Pline
Donut
Fill
Point
Grid
Snap
Ortho
Polar Snap
Osnap
Direct Entry Method

12. ASK A FRIEND …. please use this time to collaborate with a partner to discuss any commands or AutoCAD processes.
What command creates parallel lines at the same time?
What is panning (small hand)?
How do I turn something 90 degrees?
What is a donut in AutoCAD?
What is the difference between a Polyline and a regular line?