1. Technician License Course Chapter 8 Lesson Module 18: Operating Regulations: Control Operators; Station Identification; Third-Party Communications

2. Control Operator Must have a valid FCC issued Amateur Radio license (be named in the ULS database) or be a foreign amateur operating under a reciprocal agreement. Station must operate within the privileges authorized by the control operator’s license. Control operator must be present at the control point of the station (the on-off switch) or remotely connected by a control link. The station licensee designates the control operator.

3. Most Important Information Control operator – the licensed amateur responsible for making sure transmissions comply with FCC rules. Control operator responsibilities. –The FCC’s primary concern is that transmissions are made only under the control of a licensed operator.

4. Station Control The control point is where the control operator function is performed. –It can be local or via link. All stations require control when transmitting. –Local –Remote –Automatic

5. Guest Operations Non-licensed people can use a ham radio but only when a control operator is present. –The control operator is solely responsible for station operation. Licensed guests can use a ham radio station. –In this case, both the station licensee and the guest ham control operator are responsible for station operation.

6. Station Identification (ID) Normal ID. –Say your call sign every ten minutes during and at the end of the contact (QSO). Use of Tactical Call Signs. –Does not substitute for proper station ID. Ham Guests. Control operator privileges and ID.

7. Station Identification (ID) FCC Rules require ID in the English language when using phone. CW is always permitted. Self-assigned Designators –Are permitted, as long as they do not conflict with FCC rules –Normally your call followed by / something Eg: KA6BQF/7 Spoken slant, slash, stroke

8. ID Rules Apply Repeaters must also ID using the same 10 minute rule. –Can be voice or CW (at 20 WPM or less). Satellites and ISS have special rules. Above 50km is a space station. Special event calls. –Normal club call or control operator call given once per hour.

9. Third-Party Communications Third-party means that a non-ham is involved in communication via ham radio. –Could be actually speaking on the air. –Could be passing a message on behalf of the non-ham. Two situations – different rules. –Within the US. –Communication that crosses international borders.

10. Third-Party within US No special rules. Just make sure the message is non- commercial in nature.

11. Third-Party Across Borders Make sure that third-party agreement exists. –Check for current third-party agreements from ARRL Web site or FCC sources if in doubt. –You might be surprised at the countries that we do not have third-party agreements with. During station identification say both stations’ call signs.

12. When must an amateur station have a control operator? (T1E01) A. Only when the station is transmitting B. Only when the station is being locally controlled C. Only when the station is being remotely controlled D. Only when the station is being automatically controlled

13. When must an amateur station have a control operator? (T1E01) A. Only when the station is transmitting B. Only when the station is being locally controlled C. Only when the station is being remotely controlled D. Only when the station is being automatically controlled

14. Who is eligible to be the control operator of an amateur station? (T1E02) A. Only a person holding an amateur service license from any country that belongs to the United Nations B. Only a citizen of the United States C. Only a person over the age of 18 D. Only a person for whom an amateur operator/primary station license grant appears in the FCC database or who is authorized for alien reciprocal operation

15. Who is eligible to be the control operator of an amateur station? (T1E02) A. Only a person holding an amateur service license from any country that belongs to the United Nations B. Only a citizen of the United States C. Only a person over the age of 18 D. Only a person for whom an amateur operator/primary station license grant appears in the FCC database or who is authorized for alien reciprocal operation

16. Who must designate the station control operator? (T1E03) A. The station licensee B. The FCC C. The frequency coordinator D. The ITU

17. Who must designate the station control operator? (T1E03) A. The station licensee B. The FCC C. The frequency coordinator D. The ITU

18. What determines the transmitting privileges of an amateur station? (T1E04) A. The frequency authorized by the frequency coordinator B. The class of operator license held by the station licensee C. The highest class of license held by anyone on the premises D. The class of operator license held by the control operator

19. What determines the transmitting privileges of an amateur station? (T1E04) A. The frequency authorized by the frequency coordinator B. The class of operator license held by the station licensee C. The highest class of license held by anyone on the premises D. The class of operator license held by the control operator

20. What is an amateur station control point? (T1E05) A. The location of the station’s transmitting antenna B. The location of the station’s transmitting apparatus C. The location at which the control operator function is performed D. The mailing address of the station licensee

21. What is an amateur station control point? (T1E05) A. The location of the station’s transmitting antenna B. The location of the station’s transmitting apparatus C. The location at which the control operator function is performed D. The mailing address of the station licensee

22. When the control operator is not the station licensee, who is responsible for the proper operation of the station? (T1E07) A. All licensed amateurs who are present at the operation B. Only the station licensee C. Only the control operator D. The control operator and the station licensee are equally responsible

23. When the control operator is not the station licensee, who is responsible for the proper operation of the station? (T1E07) A. All licensed amateurs who are present at the operation B. Only the station licensee C. Only the control operator D. The control operator and the station licensee are equally responsible

24. Who does the FCC presume to be the control operator of an amateur station, unless documentation to the contrary is in the station records? (T1E11) A. The station custodian B. The third party participant C. The person operating the station equipment D. The station licensee

25. Who does the FCC presume to be the control operator of an amateur station, unless documentation to the contrary is in the station records? (T1E11) A. The station custodian B. The third party participant C. The person operating the station equipment D. The station licensee

26. When may a Technician Class licensee be the control operator operating in an exclusive Extra Class operator segment of the amateur bands? (T1F08) A. Never B. On Armed Forces Day C. As part of a multi-operator contest team D. When using a club station whose trustee is an Extra Class operator licensee

27. When may a Technician Class licensee be the control operator operating in an exclusive Extra Class operator segment of the amateur bands? (T1F08) A. Never B. On Armed Forces Day C. As part of a multi-operator contest team D. When using a club station whose trustee is an Extra Class operator licensee

28. What is the FCC Part 97 definition of a space station? (T1A05) A. Any multi-stage satellite B. An Earth satellite that carries one or more amateur operators C. An amateur station located less than 25 km above the Earth’s surface D. An amateur station located more than 50 km above the Earth’s surface

29. What is the FCC Part 97 definition of a space station? (T1A05) A. Any multi-stage satellite B. An Earth satellite that carries one or more amateur operators C. An amateur station located less than 25 km above the Earth’s surface D. An amateur station located more than 50 km above the Earth’s surface

30. Which of the following types of communications are permitted in the Amateur Radio Service? (T1D11) A. Brief transmissions to make station adjustments B. Retransmission of entertainment programming from a commercial radio or TV station C. Retransmission of entertainment material from a public radio or TV station D. Communication on a regular basis that could reasonably be furnished alternatively through other radio services

31. Which of the following types of communications are permitted in the Amateur Radio Service? (T1D11) A. Brief transmissions to make station adjustments B. Retransmission of entertainment programming from a commercial radio or TV station C. Retransmission of entertainment material from a public radio or TV station D. Communication on a regular basis that could reasonably be furnished alternatively through other radio services

32. What type of identification is being used when identifying a station on the air as “Race Headquarters?” (T1F01) A. Tactical call B. Self-assigned designator C. SSID D. Broadcast station

33. What type of identification is being used when identifying a station on the air as “Race Headquarters?” (T1F01) A. Tactical call B. Self-assigned designator C. SSID D. Broadcast station

34. When using tactical identifiers, how often must your station transmit the station’s FCC assigned call sign? (T1F02) A. Never, the tactical call is sufficient B. Once during every hour C. Every ten minutes D. At the end of every communication

35. When using tactical identifiers, how often must your station transmit the station’s FCC assigned call sign? (T1F02) A. Never, the tactical call is sufficient B. Once during every hour C. Every ten minutes D. At the end of every communication

36. When is an amateur station required to transmit its assigned call sign? (T1F03) A. At the beginning of each contact, and every 10 minutes thereafter B. At least once during each transmission C. At least every 15 minutes during and at the end of a contact D. At least every 10 minutes during and at the end of a contact

37. When is an amateur station required to transmit its assigned call sign? (T1F03) A. At the beginning of each contact, and every 10 minutes thereafter B. At least once during each transmission C. At least every 15 minutes during and at the end of a contact D. At least every 10 minutes during and at the end of a contact

38. Which of the following is an acceptable language for use for station identification when operating in a phone sub-band? (T1F04) A. Any language recognized by the United Nations B. Any language recognized by the ITU C. The English language D. English, French, or Spanish

39. Which of the following is an acceptable language for use for station identification when operating in a phone sub-band? (T1F04) A. Any language recognized by the United Nations B. Any language recognized by the ITU C. The English language D. English, French, or Spanish

40. What method of call sign identification is required for a station transmitting phone signals? (T1F05) A. Send the call sign followed by the indicator RPT B. Send the call sign using CW or phone emission C. Send the call sign followed by the indicator R D. Send the call sign using only phone emission

41. What method of call sign identification is required for a station transmitting phone signals? (T1F05) A. Send the call sign followed by the indicator RPT B. Send the call sign using CW or phone emission C. Send the call sign followed by the indicator R D. Send the call sign using only phone emission

42. Which of the following formats of a self- assigned indicator is acceptable when identifying using a phone transmission? (T1F06) A. KL7CC stroke W3 B. KL7CC slant W3 C. KL7CC slash W3 D. All of these choices are correct

43. Which of the following formats of a self- assigned indicator is acceptable when identifying using a phone transmission? (T1F06) A. KL7CC stroke W3 B. KL7CC slant W3 C. KL7CC slash W3 D. All of these choices are correct

44. Which of the following restrictions apply when appending a self-assigned call sign indicator? (T1F07) A. It must be more than three letters and less than five letters B. It must be less than five letters C. It must start with the letters AA through AL, K, N, or W and be not less than two characters or more than five characters in length D. It must not conflict with any other indicator specified by the FCC rules or with any call sign prefix assigned to another country

45. Which of the following restrictions apply when appending a self-assigned call sign indicator? (T1F07) A. It must be more than three letters and less than five letters B. It must be less than five letters C. It must start with the letters AA through AL, K, N, or W and be not less than two characters or more than five characters in length D. It must not conflict with any other indicator specified by the FCC rules or with any call sign prefix assigned to another country

46. What must an amateur operator do when making on-air transmissions to test equipment or antennas? (T2A06) A. Properly identify the transmitting station B. Make test transmissions only after 10:00 p.m. local time C. Notify the FCC of the test transmission D. State the purpose of the test during the test procedure

47. What must an amateur operator do when making on-air transmissions to test equipment or antennas? (T2A06) A. Properly identify the transmitting station B. Make test transmissions only after 10:00 p.m. local time C. Notify the FCC of the test transmission D. State the purpose of the test during the test procedure

48. Which of the following is true when making a test transmission? (T2A07) A. Station identification is not required if the transmission is less than 15 seconds B. Station identification is not required if the transmission is less than 1 watt C. Station identification is required only if your station can be heard D. Station identification is required at least every ten minutes during the test and at the end

49. Which of the following is true when making a test transmission? (T2A07) A. Station identification is not required if the transmission is less than 15 seconds B. Station identification is not required if the transmission is less than 1 watt C. Station identification is required only if your station can be heard D. Station identification is required at least every ten minutes during the test and at the end

50. Which of the following methods is encouraged by the FCC when identifying your station when using phone? (T2B09) A. Use of a phonetic alphabet B. Send your call sign in CW as well as voice C. Repeat your call sign three times D. Increase your signal to full power when identifying

51. Which of the following methods is encouraged by the FCC when identifying your station when using phone? (T2B09) A. Use of a phonetic alphabet B. Send your call sign in CW as well as voice C. Repeat your call sign three times D. Increase your signal to full power when identifying

52. Third-Party Communications Third-party means that a non-ham is involved in communication via ham radio. –Could be actually speaking on the air. –Could be passing a message on behalf of the non-ham. Two situations – different rules. –Within the US. –Communication that crosses international borders.

53. Third-Party within US No special rules. Just make sure the message is non- commercial in nature.

54. Third-Party Across Borders Make sure that third-party agreement exists. –Check for current third-party agreements from ARRL Web site or FCC sources if in doubt. –You might be surprised at the countries that we do not have third-party agreements with. During station identification say both stations’ call signs.

55. To which foreign stations do the FCC rules authorize the transmission of non-emergency third party communications? (T1F11) A. Any station whose government permits such communications B. Those in ITU Region 2 only C. Those in ITU Regions 2 and 3 only D. Those in ITU Region 3 only

56. To which foreign stations do the FCC rules authorize the transmission of non-emergency third party communications? (T1F11) A. Any station whose government permits such communications B. Those in ITU Region 2 only C. Those in ITU Regions 2 and 3 only D. Those in ITU Region 3 only