1. DLP LCD PANEL Programming
Intelligent control terminal-DLP panel Programming
Front
DLP LCD PANEL Programming

2. INTERFACE FUNCTION DLP Device subnet ID and device ID
Can make remark according to actual location, convenience for maintenance and management
Set the backlight, Higher value make the Great Lightness, And vice versa
DLP
INTERFACE FUNCTION

3. DLP PANEL Page Targets of keys Remark of each keys Mode of each keys
Enter the number of buttons control target, when in single mode only have one targets as default , when In combination mode can enter multiple, up to 99 .
Page
Targets of keys
DLP Key number
Remark of each keys
Mode of each keys
DLP PANEL
INTERFACE FUNCTION

4. Key control mode
Signal – ON: only execute a single event on ( only to control a target on)
Signal – off: only execute a single event off( only to control a target off)
Signal –on/ off: only execute a single event on/off( can control a target on/off)
inching: Pressing will on , otherwise off, control single event .
Note : control type is common switch and curtain switch
Combination On: only execute combination event on ( can control multi-targets on)
Combination off: Only execute combination event off( can control multi-targets off)
Combination on/off: can execute combination event on/ off ( can control multi-targets on/off)

5. Start programming DLP panel
2、Select a Key combination way, The default is the first type, see the picture, in Blue is a combination，Blue part is combine together, White part is separated
1、click "combination way”
DLP panel
Start programming

6. Combination way 1 1 2 3 2 4 Picture A
example：In picture A selected the third (3) combination way . see Picture B key one and key two combined into one key. Then press key one or key two , the effect would be same as press key one .
In picture B , key 3 and key 4 is combined as one key, then press key three or key four , the effect would be same as press key three . In other combination way , Blue part is combine together and set the first key, the white part is independence to control

7. DLP PANEL 1、set the remark for each key 2,Input Remark for each Key
3、save

8. DLP PANEL 1、Click “Mode” to set the mode for each key
2、Key mode selection
DLP PANEL
3、save

9. Common Key control mode
Signal – ON: only execute a single event on ( only to control a target on)
Signal – off: only execute a single event off( only to control a target off)
Signal –on/ off: only execute a single event on/off( can control a target on/off)
inching: Pressing will on , otherwise off, control single event .
Note : control type is common switch and curtain switch
Combination On: only execute combination event on ( can control multi-targets on)
Combination off: Only execute combination event off( can control multi-targets off)
Combination on/off: can execute combination event on/ off ( can control multi-targets on/off)

10. DLP PANEL 2、Select the download status
3、Double click the key that need to download pictures. Note The picture format is in BMP，Size is different according to the combination way, please download see the remark near the button to download correct pictures
1、Click” Pic download” , set the display content of key
DLP PANEL

11. 4、select Picture from the Pop-up choice box ,need to in BMP Format, please make the Dimensions as per request
5、Open
DLP PANEL

12. DLP Signal button download
6、download all the selected picture for each button in current status
DLP

13. 7、When system pop-up “All download success” ，can check if the display in DLP panel is change

14. 8、select “ On Status” to download the key picture when it is in pressing status
9、Double click the key that need to download pictures, the format need to be BMP. Size is different according to the combination way, please download see the remark near the button to download correct pictures
10、download all the selected picture for each button in current status

15. 1、Click “function” to set the detail function of each key
2、if it is combination on/off mode ,input the type of the target address which need to be control
DLP PANEL
3、save

16. AIR CONDITIONNING CONTROL FUNCTION
Select AC function
select “enable "to start AC function, if it is central AC, Need to enter the AC module address 。
Set temperature compensation, compensation for the difference between display temperature and actual temperature .because according to the installation position ,the temperature would have differences..
ON/ Unlock panel AC Control page
Read panel actual status, including temperature , Fan speed. mode and other information , can set the parameters .then click " save" to send control command to panel 。
DLP Panel
To specify the target network or broadcast the panel temperature
AIR CONDITIONNING CONTROL FUNCTION

17. 1、Make sure “ IR emission replays function” is selected , otherwise can not send the selected information
2、Select the model that need to set the control targets
3.set the control targets of each mode ,As picture select "cooling. Heating" .then in information of Air conditioning , need to fill control targets of each temperature value, the type is universal switch
Tip: How to know the control target?
Control target is learn air conditioning remote control keys code by IR Learner.
Then Upload to SB-EM-IR（ Infrared transmitter ） control code position information.
To Know the specific target , just entre the in Infrared transmitter setting interface
AC CONTROL FUNCTION