1. REBUS, Inc. New Product Showcase
205 West Bridgewater Road, Aston, PA 19014
PRESENTED TO
2006 Annual Meeting
Montreal, Quebec, Canada
September 12, 2006

2. “Color Department for the Thermoset Plastics Industry,”
Agenda
Rebus Introductions
General Product Overview
New Products
Benzoate Ester dispersions for hot cure urethane elastomers
D2000 dispersions for polyurea coatings
Desmophen NH 1420 dispersions for polyaspartic coatings
Oligomer Dispersions for energy curable films and coatings
“Color Department for the Thermoset Plastics Industry,”

3. Introduction/Mission
Specialty chemical manufacturer
Color and additive dispersions
Paste or liquid form
Thermoset plastics industry
Custom tolling services for creating effect chemicals
The Color Department for the Thermoset Plastics Industry
Entrepreneurial and agile
Capable of rapidly responding with customized solutions
Line of standard products
“Color Department for the Thermoset Plastics Industry,”

4. “Color Department for the Thermoset Plastics Industry,”
Company Overview
Founded in 1992
Hands-on management team with industry experience since 1976
ISO 9001:2000 certified
TS 16949, 4Q06
Modern, well appointed plant
Three-acre site, 40,000 square feet
10 miles / Philadelphia International Airport
Convenient to major highways
Fully-equipped laboratory
Proactive R&D capability
State of the art color spectrophotometry
“Color Department for the Thermoset Plastics Industry,”

5. “Color Department for the Thermoset Plastics Industry,”
Core Product Lines
Urethanes
Series 1000 Polyester Polyols
Series 2000 Polyether Polyols
Series 3000 HMW Polyether Polyols
Epoxies (All Series 6000)
Bis A
Bis F
Epoxy Novolacs
Color Pack 6000CP
Non-float 6000NF
Polyesters
Series 4000
Series 5000
Series 8000
“Color Department for the Thermoset Plastics Industry,”

6. “Color Department for the Thermoset Plastics Industry,”
New Product Lines
Hot Cure Urethane Elastomer
Series Benzoate Ester
Series plasticizers are formulated using Benzoflex 9-88 plasticizers, an excellent diluent for many urethane elastomer formulations and ideal for introducing color into the prepolymer.
Pigments: Organic and Inorganic pigments.
“Color Department for the Thermoset Plastics Industry,”

7. “Color Department for the Thermoset Plastics Industry,”
New Product Lines
Polyurea
Series Polyamine Dispersions
Series dispersions are pigment and additive dispersions based on D2000 primary polyether amine. Although not required by the PDA definition of a pure polyurea Rebus considers this the ideal method for coloring the resin component in polyureas.
Pigments: Organic and Inorganic pigments.
“Color Department for the Thermoset Plastics Industry,”

8. “Color Department for the Thermoset Plastics Industry,”
New Product Lines
Polyaspartic Esters
Series Polyaspartic Ester Dispersions
Series dispersions are pigment and additive dispersions based on Desmophen NH 1420 which is the ideal method to introduce color in your high performance aliphatic polyurea coatings.
Pigment: Iron oxides and high performance organic pigment for excellent light fastness and weather resistances.
“Color Department for the Thermoset Plastics Industry,”

9. “Color Department for the Thermoset Plastics Industry,”
New Product Lines
Series 9000 Oligomer Dispersions
Urethane Acrylate Oligomer
Rebus’ Series 9000UA products are made using a viscous aliphatic urethane acrylate oligomer. This series offers the best light-fastness, but due to the high viscosity of the oligomer, these dispersions have a thick, paste-like consistency.
End Uses: Wood Coatings, High Performance Coatings, Electronics
Pigments: transparent iron oxides for wood coating, and high performance organic pigment for excellent chemical and weather resistances.
Polyester Acrylate Oligomer
Rebus’ Series 9000PA products are made using a low viscosity aliphatic polyester acrylate oligomer. This series offers good light-fastness with a high pigment loading at pourable viscosities.
End Uses: Wood Coatings, Inks, Coatings, Electronic
Epoxy Acrylate Oligomer
Rebus’ Series 9000EA products are made using a low viscosity epoxy acrylate oligomer. This series is not recommended for exterior applications due to the epoxy backbone of the oligomer. The dispersions in this series utilize high pigment loading at pourable viscosities.
End Uses: Graphic Arts, Inks, Electronics
Pigments: organic pigments designed for indoor applications.
“Color Department for the Thermoset Plastics Industry,”

10. “Color Department for the Thermoset Plastics Industry,”
Tolling Services
Tolling
Any liquid (polymer) with a flash point >200o F
Any non-hazardous granular or crystalline chemical
“Color Department for the Thermoset Plastics Industry,”

11. “Color Department for the Thermoset Plastics Industry,”
R ● E ● B ● U ● S I ● N ● C
“Color Department for the Thermoset Plastics Industry,”