1. SMT Control System Steward Observatory Faculty MeetingMay 02, 2003 A rizona R adio O bservatory Thomas W. Folkers

2. SMT: Specifications Elevation:10,435 ft. Dish:10 Meter. F/D = 0.35 Mount:Azimuth – Elevation. Focus:Nasmyth or Bent Cassegrain. Surface:60 Adjustable CFRP Panels. Accuracy:15 microns RMS. Pointing:< 2 arc seconds, RMS on Sky. Tracking:< 0.2 arc seconds. RMS Support:CFRP & Steel. Total Weight:41,500 Kg, (46 Tons) Building:650 Tons.

3. Old SMT Control System VMS Based Vax System. Telescope Commissioned in 1993 with Outdated CAMAC Bus System. Spare Parts Increasingly Impossible to Come by. Monolithic Control System Design. Limited Data Acquisition Speed. Text Based Interface. No Remote Observing and Limited Debugging.

4. New Control System Graphical User Interface. ( Xwindows ) Network Based Distributed Parallel Processing. Remote Observing. Remote Debugging. Remote Operation Possible. Higher Data Rates. ( Up to 20X for OTF) Non-Propriety Hardware. ( PCI / ISA / PC104 ) Non-Propriety Operating Systems. ( Linux ) Compatible with 12 Meter.

6. Operator’s Control Computers Main Control Computers: –(3) Dual Pentium Processor Systems. –Six LCD Displays. –Runs All Non Real Time Processes. –Displays all Status and Data Readouts.

7. SMT Control Room

8. Computer Room BeforeAfter

9. Computer Room (before)

10. Computer Room (After)

11. Spectral Line Backends Filters Banks: –VxWorks Based. –128 x 62.5 Khz Filters. –256 x 250 Khz Filters. –256 x 1 Mhz Filters. Acousto-Optical-Spectrometers: –RT-Linux Based. –(3) Units of 2048 Channels each. –(2) 1 Ghz Bandwidth. 1Mhz/Channel. –(1) 250 Mhz Bandwidth. 385 Khz/Channel. Chirp Transform Spectrometer: –RT-Linux Based. –(3) Identical Units of 4096 Channels. –183 Mhz Bandwidth. 43Khz/Channel. –(1) Unit Installed.

13. Spectral Line OTF Map

14. Continuum Backend Digital Back End: –RT-Linux. –Capable of Capturing Data From 1 of 2 banks of 20 backends simultaneously. –Generates Station Timing Signals.

15. DBE Computer

16. 19 Channel Bolometer Continuum OTF Map

17. Auxiliary Telescope Systems Apex Control Computer: –Sub-Reflector Nutation. –Telescope Focus. FMS Control Computer: –GPIB Control of IF & LO Synthesizers. –Reads Inclinometers & Building Currents. –Receiver IF & LO Routing Switches.

18. Pointing Systems Optical Pointing: –Linux Based Frame Capture System. –Apogee KX1E CCD Frame Transfer Camera. –768 x 512 Pixel Resolution. –0.766 Arc Second/Pixel. –30ms to 173 Minute Integration Times. –Thermo-Electrically Cooled. –Used to Fit 4 of 9 Pointing Model Parameters.

19. Pointing Systems: (optical) 10 Minute Optical Exposure. Digitally EnhancedHistogram

20. Pointing Systems (cont) Inclinometers: –(2) Sets of Orthogonal Mounted Inclinometers. –Use to Monitor Telescope Mount Tilt. –Real Time Updates of Tilt Terms.

21. Pointing Systems (inclinometers)

22. Analysis Systems Observer Workstation: –Dual Processor Pentium. –Dual LCD Displays. –150 Gbytes Storage for Reduced Data. –Linux Based Analysis: Class NIC Aips Unipops (Future)

23. File Server File Server: –360 Gbytes of Raw Data Storage. –All Spectral Line Data Handling Processes Run Here. Minimizes Data Transfer Time.

24. Future Plans Additional Observer’s Linux Workstations At Both Mt. Graham and in Tucson. Remote Observing Station in Tucson. Improved Continuum Pointing Routines. Kitchen and Lounge On-Line Displays. NOTE:Power Savings: Old System vs New. UPS Load Reduced from 65% to 42%. A Difference of 5.52 KW. @ $0.32 per KWH We Save ~$15,400 / Year.