Download presentation
Presentation is loading. Please wait.
Published byTracy Chambers Modified over 9 years ago
1
Configuring A Wireless Access Point Made Simple
2
o The first step was figuring out which devices I wanted to use for the connections o The devices I chose are: o Dell Latitude 620 Laptop o Mobile (WIFI) Hot Spot from ISP (Internet Service Provider) o USB cable (doubles as a power charger) o Ensuring the laptop and the WIFI Hot Spot were both charged, I connected both devices using the USB cable provided by the ISP o Then, following the instructions provided by the ISP for “Quick Setup” I turned on the Mobile Hot Spot allowing the device to “boot up” o The Mobile Hotspot has an automatic configuration wizard to simplify the process and it prompted me to provide a pass code o The configuration wizard then enabled the laptop to connect wirelessly o I could then disconnect the USB cable from the laptop and the Hot Spot o As long as the Mobile Hot Spot is on, the laptop automatically connects to the internet
3
Initial Connection Made by USB Wireless WIFI Hot Spot Laptop ISP
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.