1. Metamorphism and Metamorphic Rocks Chapter 7

2. Metamorphism Metamorphism … is the transformation of rock by temperature and pressure … is the transformation of rock by temperature and pressure Metamorphic rocks are produced by transformation of: Metamorphic rocks are produced by transformation of:  Sedimentary and Igneous rocks, and by the further alteration of other metamorphic rocks

3. 0 km Sedimentary rock Metamorphic rock Igneous rock 50 km 10 km ~200ºC ~800ºC Increasing depth and temperature Melting Metamorphism Sedimentary rock Sediment Metamor -phism occurs between about 10 and 50 km of depth The rocks don’t melt

4. North Cascades Canadian Shield Rocky Mountains Grand Canyon Appalachian Mountains Black Hills Llano Uplift Originally buried deep, metamorphic rocks are seen when erosion removes covering rocks, and in the cores of mountains Glaciers exposed the Best US exposures in New England and the South

5. Metamorphism Metamorphism Metamorphism progresses from low to high grades Metamorphism progresses from low to high grades Rocks remain solid during metamorphism Rocks remain solid during metamorphism Metamorphism occurs above 50km melting depth for felsic minerals Metamorphism occurs above 50km melting depth for felsic minerals

6. What causes metamorphism? 1. Heat  Most important agent  Heat drives recrystallization - creates new, stable minerals  Increasing Heat with Depth

7. Temperature Increase with Depth “Geothermal Gradient” due to: Radioactive Isotopes Intruding Magma Friction Between Moving Bodies of Rock

8. What causes metamorphism? 2. Pressure (stress) Increases with depth Pressure can be applied equally in all directions or differentially All Directions = “Confining Pressure” also called “lithostatic pressure” Differential = “Directed Pressure”

9. Origin of pressure in metamorphism (due to burial) (Convergent Margin) Confining pressure aka “lithostatic”

10. Confining Pressure

11. Directed Pressure

12. Directed Pressure causes rocks to become folded, and minerals to reorient perpendicular to the stress: “foliation” Source: Kenneth Murray/Photo Researchers Inc.

13. Foliation Minerals Recrystallize Perpendicular to the Directed Pressure If the minerals are flat, such as sheet- like Micas, their parallel orientation gives a layered look; layering unrelated to the original bedding in the parent rock.

14. Main factors affecting metamorphism Main factors affecting metamorphism 3. Parent rock  Metamorphic rocks typically have the same chemical composition as the rock they were formed from.  Different minerals, but made of the same atoms.

15. Metamorphic Settings Metamorphic Settings Three types of metamorphic settings: Three types of metamorphic settings:  Contact metamorphism – due heat from adjacent rocks  Hydrothermal metamorphism – chemical alterations from hot, ion-rich water  Regional metamorphism -- Occurs in the cores of mountain belts and subduction zones (Converging Margins). Makes great volumes of metamorphic rock. Includes: –Burial Metamorphism – e.g. Burial of sediments deeper than 10 km – non-foliated –Dynamothermal Metamorphism – Directed pressure in Plate Tectonic Processes - foliated

16. 1. Contact Metamorphism Baking due to nearby Magma Effect strongest in rocks in immediate contact

17. Contact metamorphism Produced mostly by local heat source

18. Contact Metamorphism Metamorphic Aureole

19. 2. Hydrothermal Metamorphism Due circulation of water near Magma Important at mid-ocean ridge

20. Hydrothermal Metamorphism

21. 3. Regional Metamorhism Most Dynamothermal metamorphism occurs along convergent plate boundaries Most Dynamothermal metamorphism occurs along convergent plate boundaries Example 1: Continent-Continent Collisions  Compressional stresses deforms plate edge  Continents Collide  Major Folded Mountain Belts: Alps, Himalayas, and Appalachian Mts.

22. Dynamothermal Metamorphism, Before collision Sediments are “unconsolidated”. They will fold if pushed.

23. Dynamothermal Metamorphism, After continental collision Felsic continental materials and sediments are buoyant, they have low density They float, cannot be subducted, so they get squashed.

24. 2. Regional Metamorphism (continued) Most Dynamothermal metamorphism occurs along convergent plate boundaries Most Dynamothermal metamorphism occurs along convergent plate boundaries  Example 2: In Subduction Zones

25. Metamorphism in a Subduction Zone

26. Metamorphism and plate tectonics Metamorphism at subduction zones Metamorphism at subduction zones Cores of subduction zones contain linear belts of metamorphic rocks Cores of subduction zones contain linear belts of metamorphic rocks High-P, low-T zones near trench High-P, low-T zones near trench High-T, low-P zones in regions near igneous activity within shallow Lithosphere (Crust) High-T, low-P zones in regions near igneous activity within shallow Lithosphere (Crust) High P, high-T zones in regions near igneous activity deeper in Lithosphere (Uppermost Mantle) High P, high-T zones in regions near igneous activity deeper in Lithosphere (Uppermost Mantle)

27. Oceanic sediments Basalt High-temperature/low-pressure metamorphism Low-temperature/ high-pressure metamorphism CONTINENTAL CRUST High- temperature/ high- pressure metamorphism

28. Metamorphic Grade and Index Minerals Certain minerals, called index minerals, are good indicators of the metamorphic conditions in which they form Certain minerals, called index minerals, are good indicators of the metamorphic conditions in which they form

29. Index Minerals in metamorphic rocks Note Quartz and Feldspar are not index minerals: Why? Note Temperature gradient 220 o C 580 o C 460 o C690 o C

30. Here is an internally heated pressure vessel at the AMNH With these you can study, for example: 1. the temperature and pressure conditions at which polymorphs change from one form to another. (next slide) 2. the reactions of minerals with fluids (for example salty or alkaline water) at high temperatures and pressures. 3. the conditions necessary to change one assemblage of minerals to another http://research.amnh.org/earthplan/research/Equipment/Petrology

31. Any Useful Thermometers and Pressure Gauges? Polymorphs of Al 2 SiO 5 Kyanite Sillimanite Andalusite

32. 7_21 CANADA NEW YORK CANADA U.S.A. Albany Boston Scranton Long Island Binghamton ATLANTIC OCEAN Unmetamorphosed Chlorite/muscovite zone Biotite zone Garnet zone Staurolite zone Sillimanite zone High grade Medium grade Low grade Augusta PENNSYLVANIA NEW HAMPSHIRE MAINE MASSACHUSETTS Concord Montpelier VERMONT CONNECTICUT NEW JERSEY R.I. Providence Hartford Newark Increasing pressure and temperature DIAGENESIS LOW GRADE Chlorite and muscovite Biotite Garnet Staurolite Sillimanite INTERMEDIATE GRADE HIGH GRADEMELTING           New England Dynamothermal Metamorphism r i f t v a l l e y

33. Metamorphic Environments Metamorphic grade or Facies  A group of minerals that form in a particular P-T environment  Can be used to deduce T-P conditions of formation

34. Metamorphic Environments in Subduction Zones We can look at minerals in Metamorphic Rocks and determine where they formed. Water facilitates metamorphic reactions by allowing movement of atoms and ions

35. Greenschist Hand Sample Greenschist Thin Section Chl-Ep

36. Mica Schist

37. Blueschist glaucph Amphibolite

38. Common metamorphic rocks Nonfoliated rocks Nonfoliated rocks  Quartzite –Formed from a parent rock of quartz-rich sandstone –Quartz grains are fused together –Forms in intermediate T, P conditions

39. Sample of quartzite Thin section of quartzite Field Geologists are grateful for quartzites. They don’t foliate, so you can see the folds. Mudrocks foliate; much harder to map.

40. Flattening of quartz grains in quartzite

41. 7_18 Fracture Sandstone Quartzite

42. Common metamorphic rocks Nonfoliated rocks (cont.) Nonfoliated rocks (cont.)  Marble –Coarse, crystalline –Parent rock usually limestone –Composed of calcite crystals –Fabric can be random or oriented

43. Marble (nonfoliated)

44. Common metamorphic rocks Foliated rocks Foliated rocks –Type formed depends on metamorphic grade –Grade depends on depth

45. Change in metamorphic grade with depth Increasing Directed Pressure and increasing Temps Mudstones are sediments, can be squashed by burial and/or in continent-continent collisions

46. Common metamorphic rocks Foliated rocks Foliated rocks  Slate –Very fine-grained –Excellent rock cleavage, often perp. to original –Made by low-grade metamorphism of shale

47. Example of slate

48. Common metamorphic rocks Foliated rocks Foliated rocks  Phyllite –Grade of metamorphism between slate and schist –Made of small platy minerals –Glossy sheen with rock cleavage –Composed mainly of muscovite and/or chlorite

49. Phyllite (l) and Slate (r) lack visible mineral grains

50. Common metamorphic rocks Foliated rocks Foliated rocks  Schist –Medium- to coarse-grained –Comprised of platy minerals (micas) –The term schist describes the texture –To indicate composition, mineral names are used (such as mica schist)

51. A mica garnet schist

52. Common metamorphic rocks Foliated rocks Foliated rocks  Gneiss –Medium- to coarse-grained –Banded appearance –High-grade metamorphism –Composed of light-colored feldspar layers with bands of dark mafic minerals

53. Gneiss displays bands of light and dark minerals

54. What are metamorphic textures? Texture refers to the size, shape, and arrangement of mineral grains within a rock Texture refers to the size, shape, and arrangement of mineral grains within a rock Foliation – planar arrangement of mineral grains within a rock Foliation – planar arrangement of mineral grains within a rock

55. Outcrop of foliated gneiss

56. Metamorphic textures Foliation Foliation  Foliation can form in various ways: –Rotation of platy or elongated minerals –Recrystallization of minerals in a preferred orientation –Changing the shape of equidimensional grains into elongated and aligned shapes

57. Flattened Pebble Conglomerate = flattening

58. Development of foliation due to directed pressure

59. Migmatites- When Partial Melting Starts Heat the rock, when the minerals with the lowest melting points (Qtz, Feldspar) at that pressure melt then recrystallize, we get separate bands of Metamorphic and Igneous rock

60. End of Chapter 7