1. SL500 Modular Library System

2. Objectives Locate needed information. Define the safety and ESD requirements. Identify and locate major components. Unpack, install & configure the library. De-install the Library. Configure switches, bridges and hubs. Label and route cables drives to other equipment. Verify and /or install library firmware.

3. Objectives Setup and operating performance. Diagram and document the installation. Update the site logs to reflect the customer’s subsystem configuration.

4. Prerequisites SL500 Principles of Operation SAN Concepts and Connectivity. L-Series Library course. LTO Ultrium course. SDLT course.

5. Personal Safety Safety Precautions Lifting Techniques Shoulder, Elbow, Wrist, and Hand Safety Fiber -optic Safety Rack Safety

6. Product Precautions Electrostatic Discharge (ESD) Damage Prevention  ESD Precautions  ESD Protection Procedure  Prepare the work Area  Access the Equipment  Replace components  Cleanup Fiber – optic Cable Installation  Cable routing  Cable Management  Connector protection

7. Planning the Installation General Information  Prepare the Installation location  Knowledge in SCSI principles  Knowledge in Fibre channel principles  Configuration Diagram

8. SL500 Tape Library Types Library with LTO Cartridge Slots Library with Mixed-Media Cartridge Slots

9. Library with LTO Cartridge Slots The Base module contains  50 cartridge slots  One or two tape drives  5 – slot cartridge access port(CAP)

10. Library with LTO Cartridge Slots base module

11. LTO Slot Physical Configurations Slot Numbering scheme  Four Integers 1.Library number 2.Library module number 3.Library row number 4.Library column number

17. Library with Mixed - Media Cartridge Slots

22. Library and Rack Dimensions

24. Library Components Weights

25. Library Environment Specifications

26. Power for Library Without Tape Drives

27. Power for Base Unit and Two LTO Tape Drives

28. Installing EZ Hardware Compatibility Issues

29. Installation Steps  Unpacking  Inspection  Preparation of Rack  Install Base Unit  Install Robotics Unit  Install Façade  Install an Expansion Module  Install the Drive Tray Assemblies  Install the Power Cables  Install the Library SCSI or Fiber Channel Cables  Inserting Cartridges  Locking the Front Door and Powering-on the Library

30. Base Module Accessory Kit

31. Expansion Module Accessory Kit

32. SCSI Cabling

33. Fiber Channel Cabling

34. Inserting Cartridges

35. Powering - on the Library

36. Recording the Configuration Library Configuration Information

37. Recording the Configuration Tape Drive Configuration Information

38. Security & Password

58. FRU and Spares Replacement  Library FRU list  Drive FRU list

59. Library FRU List  Cards  MPU2  MPW  RLB  RLC  RLE  RLM  Fans  Operator Panel  Power Supply  Robotics unit  Drive FRU list

60. Drive FRU List RLD Card Fan Tape Drive Brick

61. Remote Access Tools Stream Line Library Console Service Delivery Platform(SDP) Motive Insight ACSLS