1. Peter Gross John Mitchell (absent) Alex Hershman Venkat Mokkapati

2.  Design a device that mounts an electronic item to a bicycle for use hands-free while riding  Use engineering procedures to complete the design process

4.  Gather Info  Multiple Solutions  Mounting ▪ Where? ▪ How? ▪ Materials?

5.  Base  High density polyethylene  High strength, Low cost  UV resistance  Temperature resistance of -100 C to 120 C

6.  Shock Pad (to cushion device)  Ethylene Propylene  Weather resistant  UV light resistant  Temperature resistance of -50 to 160 C

7.  Holding down the Device  How?  Materials? ▪ Film

8.  Film Cover  Clear polyurethane film  Available in a range of flexibilities and other properties  Strength, scratch-resistance, UV protection  Moisture resistance and low cost  Density value of 0.910 to 0.925 g/cm³

9.  Hold down Straps  Velcro hook and loop  Film cover with straps easy to replace if user needs to

10.  Clamp for common handlebar diameters (22.2 to 25.4 mm)  Base mounting plate sized for flexible mounting many devices  Lip on bottom edge  Use Ipod Touch as guide (4.5” x 2.4” x 0.46”)  5.75” W x 3.25” H

11.  Film cover to match base 5.75” W x 3.25” H  Velcro straps ½” W x 4” L to wrap around back

12.  Design meets objective of mounting a device and allowing hands-free use  Used general Engineering procedure to develop the design  Testing prototype would help determine if the design is functional and withstand use  An accurate cost of the mount and knowing the Market demand would determine if it is reasonable to make