1. UCLPv2-HOPI Issues BoF Joint Techs Workshop Vancouver, BC 2005

2. Project Networks Transition phases Ramp up Core Competency Tasks Ramp Down

3. Project Network – APN concept

4. Project Networks Ramp up Reserve light paths Config metro/campus network Config project specific apps

5. Project Networks - example

6. Project Network – some issues ONS to campus & cross campus fiber Black Hole (unrouted) IPv4 – ARP Leakage – 10.XXX.XXX.XXX conflicts VLAN – Configuration – Layer 2 sniffing Mystery behavior – protocol & MTU specific drops

7. Project Network – user APN control ?

8. Project Networks Core Competency Tasks project specific apps work flow (transfer/process) visualization distributed file systems

9. Mockup TRIUMF to CERN APNs APN-1 APN-2 CERN-1 TRIUMF BCNET CA*net4 SURFnet CERN

10. Project Network – some issues APN representations import/export/reserve ? work flow (grid) model explicit APN representation ? Task_1(use APN CERN-1)

11. Left click File – mouse over – select New – mouse over – select – APN Diagram – left click Assume Logged on as TRIUMF - New APN Diagram

12. Key new APN name in highlight – hit enter – renames from – New APN – CERN-1 – creates blank CERN-1 APN diagram Create APN tree

13. Right click in blank APN diagram CERN-1 – mouse over – select New – mouse over – select – Interface - left click – creates – New Interface – at location in diagram – and under CERN-1 – APN map tree Add new TRIUMF Interface

14. Select New Interface in tree - right click - select – Properties – from popup menu Select Interface Properties – per Gary Finley mods

15. Select Location Property Value select icon - left click – select Vancouver Set Interface Location Property – modified: rename eliminated – location property added – Gary Finley

16. Select Location Property Value select drop down icon - left click – select Vancouver – IPv4 algorithm cuts in and autogenerates 10.198.1.1 from /2X – also sets Name = IPv4(value) Set Interface Location Property autogenerates unrouted black hole IPv4 from pre-assigned range for logon TRIUMF updates config so used IPv4 from range not available –– Gary Finley

17. Find a local gigapop TRIUMF MAN gigE (green) interface in the ONS tree – left click – hold – drag – release on CERN-1 APN diagram Find TRIUMF ONS MAN interface drag into APN manual select

18. Scroll down to NYC01 find SURFnet MAN gigE (green) interface in the ONS tree – left click – hold – drag – release on CERN-1 APN diagram Find SURFnet ONS MAN interface drag into APN manual select

19. Right click in blank APN diagram CERN-1 – mouse over – select New – mouse over – select – Interface - left click – creates – New Interface – at location in diagram – and under CERN-1 – APN map tree – properties location select – CERN – autogenerates IPv4 - 10.168.1.2 Add new CERN interface –Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces

20. Select then right click – 10.198.1.2 IF in tree model – mouse down – select Tools – select ONS IF Wizard … - left click Add available ONS IF using wizard – mod Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces

21. Select ons-nyc01-enet_2/4 left click available ONS IF – left click Add button – repeat - select – ons-nyc01-enet_2/4 – left click Add – left click Close button Add available ONS IF using wizard – mod Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces wizard select

22. Select left click IF 10.198.1.1 – repeat – popup menu – ONS IF Wizard - select ons-van01- enet_2/4 left click available ONS IF – left click Add button – repeat - select – ons-nyc01-enet_2/4 – left click Add – left click Close button Add available ONS IF using wizard – mod Gary Finley – to eliminate manual select of intermediate ONS G1000 interfaces wizard select

23. Select left click property close tab – select left click palette open tab Close property sub window – expand palette

24. Left click on palette expand tab – click Link header to expand – click drag VLAN link – drop near 10.168.1.1 – click hold VLAN left end clip to right point of interface – end handle should turn green if ok – repeat drag drop connect for APN-1 link and APN-2 link – double click on APN-1 link to edit new APN-1 diagram… Expand Palette select drag VLAN and APN links clip to interfaces

25. Left click on Resource Palette to expand – left click – hold – drag – OXC Wizard to APN-1 diagram – connect OXC Wizard end points to both APN-1 terminus – instantiates with default instance name of OXC Wizard-1 APN-1 install OXC Wizard

26. Once connected to APN-1 terminus double click on OXC Wizard-1 to start process … APN-1 invoke OXC Wizard

27. While OXC Wizard-1 is working – left click APN-2 diagram Edit APN-2

28. Left click select APN-2 terminus – right click – mouse down – left click select Import … Import existing APN

29. Select - left click - SURFnet-CERN in Import dialogue – click ok button Select SURFnet-CERN APN

30. External APN is imported - APN-2 completed – CERN-1 is completed – left click Palette close tab – left click select CERN-1 diagram tab External SURFnet-CERN APN imported CERN-1 complete

31. Left click select CERN-1 diagram tab Select CERN-1 diagram

32. Left click select File – mouse down – select SAVE –left click – CERN-1 diagram and all subtree components are saved Save CERN-1 diagram

33. Mouse down select OXC Wizard-1 in tree – right click – mouse over – select – double click Select OXC Wizard-1 and display status – Gary Finley mods

34. OXC Wizard-1 creates a status panel displaying out currently available shortest path links – select start lease – drop down and select start date – select end lease date – left click show available button OXC Wizard-1 Status Display – Gary Finley mods – lease system

35. OXC Wizard-1 creates a new status panel displaying all available shortest path links – hold shift key down and successibvely click lightpath segments to reserve – segment shows green handles when selected - when complete - select left click reserve to hold OXC path segments for lease period OXC Wizard-1 Status Display – Gary Finley mods – reserve OXC path

36. OXC Wizard-1 creates a new OXC Reservation-1 in tree – double left click OXC Reservation-1 icon in tree to display reservation panel - select left click Cancel button to remove reservation and return lightpath segments to the available pool OXC Wizard-1 Reservation Display – Gary Finley mods – reserved OXC path

37. Project Networks Ramp Down cancel light paths release metro/campus network custom configs

38. Questions?