Download presentation
Presentation is loading. Please wait.
Published byKenneth Harper Modified over 8 years ago
1
Load Resistance – The Structural Properties of Materials Chapter 4
2
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Small spans in stone brittle material, weak in tension
3
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Discovery of arch made longer spans in stone possible
4
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Stresses in a cable
5
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Compressive and tensile stresses in building components
6
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Tensile and compressive stresses in a suspension bridge
7
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Calculating stress in a cable f = stress, P = force, A= cross-sectional area If the force applied on the baclbe is 500 lb and if the diamter of the cable is 0.5 in. (coross-sectional area = 0.196 in. 2, the tensile stress in the cable is: f 500 0.196 == 5,100 psi = 5.1 ksi f Force Area = PAPA =
8
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Ultimate Strength If the applied force on a member results in failure, stress at the point of failure is called: Ultimate stress Also known as: Ultimate strength or strength of the material
9
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Testing Compressive Strength of Concrete
10
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Determining Ultimate Strength Assume the sample tested in previous image failed when load reached 115 kips. Compressive Strength Load at failure Area of cylinder 115 28.27 === 4,100 psi = 4.1 ksi
11
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Test Specimen determining compressive strength of masonry
12
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Universal Testing Machine measures tensile strength of steel specimen
13
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Deformation = Change of length in a member caused by a tensile or compressive stress Strain ( )= Relative change in length Change in length Original length = LL =
14
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Approximate values of ultimate strain selected materials not to scale
15
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Ductile materials Materials with large deformations at failure Ultimate strain ≥ 0.5% Steel (equal strength in tension & compression) Warning before failure
16
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Brittle materials Materials with little or no deformation at failure Ultimate strain ≤ 0.5% Brick, stone and glass No visual warning before failure
17
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Malleable materials Materials that can be shaped by hammering, forging, pressing and rolling. Not always ductile.
18
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Yield strength of metals Stress-strain diagram for low- carbon steel (nts) Y = yield point U = ultimate strength F = failure point YU = area of strain hardening
19
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Elastic material Material which when deformed under load, recovers its original shape when the load is removed.
20
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Plastic (inelastic) material Material that does not recover its original shape when the load is removed after it has deformed.
21
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Elastic-plastic materials Materials that are elastic up to a particular yield stress value, and plastic thereafter. Steel Aluminum
22
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Modulus of elasticity (E) E Stress Strain =
23
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Stress-strain diagram of concrete
24
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Bending strength
25
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved.
26
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Location of neutral axis
27
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Stress distribution on small length of beam
28
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Structural efficiency The I-section in steel, wood & concrete
29
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Strategies for improving structural efficiency
30
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Distribution of stresses in bending Material near support is not fully utilized
31
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Steel reinforcing in concrete increases bending strength
32
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Types of stress
33
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. (a) Shear stress Force Area = 2.0 4.0 ==500 psi = 0.5 ksi 2.0 2(0.196) (b) Shear stress=5.1 ksi=
34
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Steel stirrup reinforcement increases shear strength at end of beam
35
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Lateral confinement increases bearing strength
36
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Local crushing
37
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Bearing plates prevent local crushing
38
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Compressive failure - sudden and catastrophic
39
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Tensile failure - elongation & necking, provide warning before failure
40
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Buckling failure
41
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Lateral buckling
42
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Blocking prevents buckling of slender beams in wood light frame floor
43
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Horizontal ties used in vertical steel column reinforcement prevents buckling
44
Mehta, Scarborough, and Armpriest : Building Construction: Principles, Materials, and Systems © 2008 Pearson Education, Upper Saddle River, NJ 07458. All Rights Reserved. Safety margin vs. Factor of safety Actual strength Required strength Safety margin= Failure stress Allowable stress Factor of safety=
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.