1. IQ Analyzer 6400/6600 Series Cutler-Hammer Power Management Products High End Metering Capabilities

2. 2 Available May 2000 New IQ Analyzer 6400/6600 Series

3. 3 Power Quality Monitoring Over 150 metered parameters for comprehensive diagnostics Assess trends, harmonics and waveforms to prevent process disruptions and equipment damage Isolate and diagnose power quality problems by analyzing historical metered data Control energy usage and costs via measurement, on-board data storage and time-of-use registers IQ Analyzer

4. 4 l l Revenue metering accuracy l l ANSI C12.16 ( 1% ) l l ANSI C12.20 ( 0.5% ) l l IEC 687 / Canada ( 0.5% ) l l Independent certification l l Time Of Use Registers l l Expanded event storage l l UL/CUL/CE (CSA applied for) l l New Display & Faceplate l l 4 Custom Display Screens Overview

5. 5 IQ Analyzer Key Features High-speed waveform capture –Programmable event triggers –2 cycles @ 128 samples/cycle & 8 cycles @ 32 samples/cycle –11 channels of voltage & current information are saved –Local display of waveform (6600 series only) Measures current and voltage through 50th harmonic –Display harmonic spectrum on local display (6600 series only)

6. 6 IQ Analyzer Key Features CBEMA/ITIC event display via PowerNet dv/dt trigger captures subcycle voltage disturbances (6600 series only) Communication flexibility: –INCOM via IPONI –Ethernet via EPONI & EPONIF –RS-232 via RS232PONI –Modbus via MPONI (Coming Soon!)

7. 7 IQ Analyzer Key Features The IQ Analyzer stores 44 different minimum & maximum values including: –Current –Voltage –Power –Power Factor –Frequency –THD

8. 8 IQ Analyzer Key Features On-board event data logging Auxiliary I/O capabilities –Analog Outputs (3) 0-20mA/4-20mA 1% accuracy –Analog Input (1) 0-20mA/4-20mA 1% accuracy –Digital Inputs (3) optically isolated +30Vdc –Digital Outputs (4) Form C contacts 10A @ 240Vac

9. 9 IQ Analyzer Key Features Monitors L-L, L-N, L-G and N-G voltage –PT ratios from 1:1 to 5,000:1 Monitors phase, neutral and ground current –CT ratios from 5:5 to 10,000:5 – Up to 40A continuous, 300A for 1 second Measures % Total Harmonic Distortion (THD) for current and voltage

10. 10 New Features New Trending Capabilities –4 Independent trends –Up to 6 parameters per trend –Can chose from over 94 parameters –Total of 90K bytes of storage Single parameter every 15 min. for 234 days –Independent memory allocation for each trend –Used with PowerNet for CBEMA/ITIC curve plotting utility

11. 11 CBEMA Curve Utility

12. 12 New Features New Trending Capabilities –Sampling rate can be set from 8 cycles to 5040 minutes (3 1/2 days) –Trend 1-3 can save data on a discrete input –Trend 4 can save data on an event –If the time period is set for an integer divisor of 60 the period starts at the next full hour.

13. 13 New Features Data Logging Features –Time & Reason for last 504 Events –Any meter event is saved –New Status Change Indicators Time of Alarms Power Up Resets Setting Changes INCOM Connection

14. 14 New Features In addition to the data logging of the last 504 events last 10 Waveform Events are also stored The real time clock can be synchronized to the line to correct for long term errors (w/o PowerNet) Programmable CT Polarity Setting –Change CT polarity from calibration menu –Last event under “Power Factor”

15. 15 New Features Time Of Use (TOU) Energy Registers –32 Schedules 8 Weekday - 8 Holiday 8 Saturday - 8 Seasons 8 Sunday –Each schedule can change 9 times a day –4 Different utility rates –Watt-hours, VAR-hours, VA-hours recorded

16. 16 New Features TOU Demands –Amps, Watts, VARS & VA

17. 17 Improvements New Case –Polycarbonate for higher durability & temperature –Rugged outer edge –Reset button changed from red to blue New Display –Reverse mode, LED backlit LCD –Yellow on black –High reliability

18. 18 Improvements Custom Screen Enhancements –Allows programming of 7 parameters per screen –Now 4 custom screens –List of programmable items extended Clock Min/Max Values since last trend Magnitude THD (V and A) –Displays each screen for 5 seconds

19. 19 New IQ Analyzer Old IQA6000/6200 catalog numbers replaced with new 6400/6600 series –IQA6410 - Separate Source PS –IQA6420 - DC PS –IQA6430 - Self Powered Three Phase PS –IQA6610 - Separate Source PS w/waveform –IQA6620 - DC PS w/waveform –IQA6630 - Three Phase PS w/waveform

20. 20 Instruction book changes to TD 17530B New Technical Data available –TD.17.02A.T.E New Color Brochure available –B.17C.01.S.E Support Material

21. 21 Literature/Sales Tools/Getting Help www.ch.cutler-hammer.com/pmp Power Management Applications Support 800.809.2772 Power Management Sales Managers CHESS Power Automation Specialists Product Guide - PG.17.01A.T.E

22. 22 Wrap UP Product Feedback PMPC Support Questions & Answers Thank You!Thank You!