2. 1Quit Using the VHS VCR in classrooms OverviewUse this documentation is used to show how to use the VHS players that are located in classrooms. Learning Objective Independently learn how to VHS players that are located in new learning areas. PrerequisitesKnowledge of: how to operate a remote controller, how to operate a stand alone VHS player Access to: classroom with permanently installed VHS player Primary Audience Lake Forest Country Day School Faculty and Staff AuthorMara Grujanac Technology Curriculum Coordinator Lake Forest Country Day School InstructionsArrows change slides. Print button prints all slides to default printer. Quit exits.

3. 2Quit Using the classroom VHS VCR 1.Turn on Epson projector remote control by sliding slider switch to right of red Power button toward front of remote 2.Point remote at projector & push the red Power button –The projector will beep –The status light on the projector will flash green –The projector will display auto-setup on the screen 3.Push the Video source button on projector remote 4.Push the power button on the VCR/DVD 3.Insert VHS videotape –Press Play or use Samsung remote to control VCR –Press Eject to remove videotape 4.Adjust ceiling speaker volume with Anchor remote

4. 3Quit Use of Classroom VHS Player 1.This is the remote for the projector. 1.Point it at the projector and push the red power button. 2.You will hear a “beep” and the light at the bottom of the projector will begin to flash green. 2.Switch to video input 1.On the remote push the video input button 3.Turn on the VHS player 4.Put VHS tape in slot and play 5.Adjust sound with remote

5. 4Quit The End! Document Control VersionDate CompleteAuthorDescriptionDate ApprovedApproved By 0.012007-05-17Grujanac, MaraInitial DraftN/A Still have a question? Contact the IT Department for further assistance: E-mail: Help@LFCDS.orgHelp@LFCDS.org Call: x168, x169, x170