1. BIKE TOOLS NEWS FOR YEAR 2010

2. 1 REPAIR BIKE STAND  For home and professional use,  easy and quick mounting system,  rubber protected jaws to prevent leaving marks on bike frame,  light and massive stand,  adjustable height from 100 cm to 160 cm,  maximum load capacity of 20 kg,  easy for assembling. CHARACTERISTICS TOOL FOR WHEEL SET

3. 2 WHEEL CENTERING STAND – for professional use  For control of the wheel position on both sides,  radial and axial control,  specially designed for use in repair shops,  plastic coated tips to protect leaving marks on the wheel,  adjustable arms to fit axle width up to 170mm,  diameters of wheels from 16 do 29 inch,  accept wheels with or without tyre removed,  quick system for pulling away the upright arm,  option to install break rotor truing calipers,  extra adapters for 20 mm axles. CHARACTERISTICS TOOL FOR WHEEL SET

4. 3 SPOKE LENGTH GAUGE  Universal spoke length ruler with ball bearings and crank cotter pins gauge,  special designed oblong holes for best measurements,  spoke lengths are in both metric and fractional markings. CHARACTERISTICS TOOL FOR FORKS

5. 4 UNIVERSAL FORK CLAMP  For holding the forks while servicing,  fits any types of forks (MTB, downhill, road forks),  quick-release system for easy fitting and removing of fork,  coated jaws for perfect protection,  extra adapters for work on forks with 20 mm through axles. CHARACTERISTICS TOOL FOR FORKS

6. 5 TRUVATIV CARTRIGE BOTTOM BRECKET TOOL WITH HANDLE  For installing and uninstalling the Truvativ bottom brackets,  proper for hole inner diameter of 11 and 14 mm,  prevent bottom bracket from damaging, CHARACTERISTICS TOOL FOR DRIVE  compose of wrench, screw with nut and handle,  possible to use with 19 mm wrench or torque wrench,  easy and safe work.

7. 6 SPOKE WRENCH 4 mm AND 4.4 mm  For centering spokes with 4 and 4.4 mm nipples,  plastic-coated,  comfortable tightening and unscrewing,  length of 100 mm. CHARACTERISTICS TOOL FOR WHEEL SET