1. Verigy V93000 Service Training
Module 26:
System Maintenance
Module 26: System Maintenance
Objective:
Given:
Maintenance Guide
Study Guide
Quiz
Answer questions concerning the maintenance routine for the V93000 test platform. 90% correct answers are required to get credit for this module.
Reference:
Maintenance Guide Chapter 1, “Maintenance Overview”
Maintenance Guide Chapter 5, “Basic Hardware Services”
Maintenance Guide Chapter 6, “Extended Hardware Services”

2. Overview
Task of Preventive Maintenance (PM) is to reduce unscheduled downtime
Maintenance Procedures are outlined in the Maintenance Guide (E )
The structure of the Maintenance Guide is as follows:
Frequently used maintenance software tools (Diagnostics and Auto-Calibration)
Maintenance intervals and tasks (tables)
Detailed explanation of the tasks to do in the scheduled intervals.
26 - Maintenance

3. Tools for Maintaining the V93000
Ground Pin Tourque Meter with Insert
Ground Pin Extractor (0,8mm left hand drill with chuck)
Signal Pin Insertion Tool
Signal Pin Extraction Tool (M 0,9 tap with chuck)
Pogo Pin Repair - E
Torque wrench ( )
Torx insert T20 ( )
Torx screw driver T10 long ( )
Cal Robot
Screw driver long T10 ( )
Extractor tool (E )
Support Rack fuse gripper
(E )
Torx bit T20 ( )
Torx bit T10 ( )
Torx bit T8 ( )
Torx bit T15 ( )
Brush ESD compliant ( )
Channel Board Repair
Torx bit T9 ( )
26 - Maintenance

4. Schedule System Maintenance is scheduled in intervals of 6 month
The Maintenance intervals are adjusted to the Calibration intervals. System Auto-Calibration should be scheduled with preventative maintenance.
26 - Maintenance

5. Schedule
26 - Maintenance

6. 26 - Maintenance