1. Answer the Questions Regarding Pending Issues on Access Control Group Name: WG4 SEC Source: LG Electronics Meeting Date: 2014-07-15 Agenda Item: SEC#11.4

2. Objective This presentation is to answer the Open Issue 5 questions that are raised by Qualcomm‘s slide (SEC- 2014-0349) – How does the hosting CSE obtain information about the location of the entity where the request message originated? – What shall be the resolution of location information used for access control? 2

3. Problem 3 The Hosting CSE does not know the location of Originator How to describe the region (or area) If the Originator is in the region defined the parameter, but denied due to ‘no location’

4. The well-known or simplest way of representing the area(or region) is circle Used by many Location-relevant standards and applications Area Description 3 tuples are needed 1)Longitude 2)Latitude 3)Radius (m)

5. 5 Area Description Multiple Areas

6. TS-0001 defines a resource type for obtaining location of a Target Node - - Configuration information how to obtain location information of a target M2M node 6 Acquisition of Location Information of the Originator locationSource locationUpdatePeriod locationTargetID locationServer locationContainerID locationContainerName Basic Information - Source (Network/Device/Sharing) - Period to obtain location information For Network-based Location - ID of the Target M2M Node - ID of Location Server located in U/N How to link with a resource - URI of the created - Name of the

7. The Hosting CSE shall create the to obtain the location of the originator Set the attributes of for acquisition location of the request Originator – locationSource == Network For reliability  trust the GPS and any AE-owned location value? – locationTargetID == Originator’s Node-ID Node-ID can be IMEI or IP address that is global unique 7 Acquisition of Location Information of the Originator

8. Make the Hosting CSE easily determine whether the Originator is in the specified area(s) for access control – OMA NetAPI for Terminal Location Interface between Hosting CSE and Location Server in the Network (Mcn) specifies a resource type as an area-based location notification service, ‘CircleNotificationSubscription’ Hosting CSE subscribes to the notification (about originator location) service – When the Originator enters and leaves the defined area the Location Server notifies of the Hosting CSE the location change. 8 Acquisition of Location Information of the Originator

9. 9 Area Notification Action Enter Leave Hosting CSE can easily know whether the Originator is in the area or not

10. Backup Slide Location Capability 3 Ways of Obtaining Location Information – Network-Based / Device-Based / Sharing-Based AE CSE AE Location Requestor Target M2M Node (490154203237518) IN Create Location Server Location Server locationSource = ‘Network’ locationTargetID = ’ 490154203237518’ locationServer = ‘locserver.lg.org’ Location Request (OMA API for Terminal Location) Performing Location (e.g., Cell-ID, OTDOA) Location Response Content = (x,y)