Download presentation
Presentation is loading. Please wait.
Published bySamuel Booker Modified over 9 years ago
1
GAS CHROMATOGRAPHY (GC)
2
GAS CHROMATOGRAPHY Sample is injected (using a syringe) into the injection port. Sample vaporizes and is forced into the column by the carrier gas ( = mobile phase which in GC is usually helium) Components of the sample mixture interact with the stationary phase so that different substances take different amounts of time to elute from the column. The separated components pass through a detector. Electronic signals, collected over time, are sent to the GC software, and a chromatogram is generated.
3
Compounds A and B interact with the stationary phase through intermolecular forces: (van der Waals or dipole-dipole forces, including hydrogen bonding). A interacts more strongly with the stationary liquid phase and is retained relative to B, which interacts weakly with the stationary phase. Thus B spends more time in the gas phase and advances more rapidly through the column and has a shorter retention time than A. Typically, components with similar polarity elute in order of volatility. Thus alkanes elute in order of increasing boiling points; lower boiling alkanes will have shorter retention times than higher boiling alkanes. GAS CHROMATOGRAPHY
4
GC - Alkane Standards Pentane Isooctane Gas Chromatograph of alkane standard mixture containing equimolar amounts of: n-hexane, 2,3-dimethylbutane, 3-methyl-pentane, n-heptane, 3-methylhexane, n-octane, 3-methylheptane, 2,2,4-trimethyl-pentane (= isooctane), all dissolved in pentane.
5
GC of Alkane Standards vs. distillation fraction #1 Standards Distillation Fraction #1
6
GC – Peak Areas and Resolution
7
GC – Isothermal vs Temperature Programming
8
GC – Example Chromatograms
9
Alltech Chromatography catalog, 550 GC – Packed vs. Capillary Columns
11
Experimental Organic Chemistry D. R. Palleros, Wiley, NY, 2000 GC – Stationary Phase
12
Alltech Chromatography catalog, 550
13
GC – Elution order vs Stationary Phase Alltech Chromatography catalog, 550
14
GC - Derivatization Why is chemical derivatization needed? GC is best for separation of volatile compounds which are thermally stable. Not always applicable for compounds of high molecular weight or containing polar functional groups. These groups are difficult to analyze by GC either because they are not sufficiently volatile, tail badly, are too strongly attracted to the stationary phase, thermally unstable or even decomposed. Chemical derivatization prior to analysis is generally done to: increase the volatility and decrease the polarity of compounds; reduce thermal degradation of samples by increasing their thermal stability; increase detector response improve separation and reduce tailing Derivatizing Reagents Common derivatization methods can be classified into 4 groups depending on the type of reaction applied: Silylation Acylation Alkylation Esterification
15
GC - Derivatization Derivatizing Reagents Common derivatization methods can be classified into 4 groups depending on the type of reaction applied: Silylation Acylation Alkylation Esterification
16
Alltech.com
17
Skoog and Leary: Principals of Instrumental Analysis, 4 th ed. Suanders, 1992 GC – Resolution and Efficiency
18
GC – Resolution vs Column Efficiency (N, H) van Deemter Equation H = A + B/u +(C s + C m )u H = L / N Skoog and Leary: Principals of Instrumental Analysis, 5 th ed. Suanders, 1998
19
CHROMATOGRAPHY Preparative vs Resolution vs Speed vs Expense
Similar presentations
© 2025 SlidePlayer.com. Inc.
All rights reserved.