1. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 1 Induction Safety Training for ALICE collaborators I.Basic safety, for any newcomer II.General and specific risks at CERN, and in particular for ALICE III.Underground safety, specific to UX-25

2. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 2 I. Basic Safety for Newcomers 1. Scope 2. Safety Policy at CERN 3. Safety Rules 4. Safety for Experiments 5. Safety organization 6. Notion of First Aid 7. Emergency means 8. In case of fire 9. In case of alarm/evacuation 10. Safety documents 11. Causes of accidents at CERN

3. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 3 1. Scope of “Safety” at CERN Safety at CERN includes  Occupational health, hygiene,  Environmental protection,  new  Work safety, operational safety,  Safety of equipment and installations.

4. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 4 2. Safety Policy at CERN  The safety policy is defined in the document SAPOCO-42 http://safety-commission.web.cern.ch/safety-commission/sapoco42/index.html  Everyone at CERN (= staff members, users, collaborators, contractors…) is place under the authority of the DG.  Everyone must be trained/informed about safety ( Read the Safety Plans )  Anyone facing an hazardous situation must report about it.  Think Safety – Work Safely !

5. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 5 2. Safety Policy at CERN  Responsibilities in matter of safety follow the managerial line; each supervisor/project leader is responsible for his team/project.  Safety Officers (DSO, FGSO, RSO…) are nominated to help supervisors.  Safety Commission and Safety Committees give advice and control. DG / CEO PH Dept Head Tech. Coord. / GLIMOS Project Leader Project Engineer Designers, staff, users…

6. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 6 2. Safety Policy at CERN  Responsibilities in matter of safety follow the managerial line; each supervisor/project leader is responsible for his team/project.  At Point-2, the installation of the Experiment is under the responsibility of TS Dep-t. Hence, the reporting line of safety is the following: DG / CEO TS Dept Head Experimental Area Manager WP Engineer WP Supervisor Workers, technicians, users…

7. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 7 2. Safety Policy at CERN Safety Officers for ALICE :  GLIMOS = Group Leader in Matter of Safety checks the design and co-ordinates all safety aspects. Disseminates and collects the info related to safety. GLIMOS = Marc. Tavlet, Deputy = Hans Taureg Note : general phone No for GLIMOS = 70608  INB link-person co-ordinates the aspects of the “Installation Nucleaire de Base” (mainly traceability) J-P. Vanuxem

8. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 8 2. Safety Policy at CERN Safety Officers for ALICE :  FGSO = Flammable Gas Safety Officer, checks the design and installation of (flammable) gas distribution. Ch. Gregory  RSO = Radiation Safety Officer, checks the safety related to ionizing and non-ionizing sources, including lasers. M. Tavlet  TSO’s = Territorial Safety Officers checks the daily safety aspects. At Pt 2, TSO = Sebastien Evrard deputy = Didier Anstett For other TSO’s, consult “Safety Officers Support” on the web

9. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 9 2. Safety Policy at CERN Some exerts from SAPOCO-42 :  Each of us must work so as to run the least possible risk and, to this end, must actively obtain a maximum amount of information to enable us to do so.  Anyone who introduces new equipment, materials or techniques must check any safety problems which may arise with their Group Leader (or GLIMOS) and Divisional Safety Officer (DSO ), and if necessary seek the advice of the Safety Commission... [# 1.10]  Supervisors are responsible for all matters of safety, occupational health, and protection of the environment connected with their activities or project […] ensuring that [collaborators] are kept fully informed of and if necessary trained in the safety aspects of their work.

10. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 10 3.Safety Rules  CERN, as an International Organization, has settled its own safety rules, based on European Directives or on rules in force in the host states.  In case CERN regulations are lacking or incomplete, the regulations of the host state concerned are applicable.  Ex.: Road traffic rules

11. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 11 4.Safety for Experiments Some exerts from SAPOCO-42 : 4.3.Anyone in charge of a project must establish a safety structure which includes an appropriate delegation of task together with the corresponding authority. 4.8.Project Leaders are responsible for safety in their project. They must ensure that all safety requirements have been taken into account from the design stage and subsequently at all stages of their project’s development through to its dismantling and final disposal.

12. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 12 4.Safety for Experiments Some more exerts from SAPOCO-42 : 5.1.Experiments, facilities, and tests must comply with the safety regulations in force at CERN in connection with the construction, operation, and disposal of equipment. 5.4.For safety matters, an experiment or test is represented by a Group Leader in Matter of Safet (GLIMOS), who is responsible for safety, with the necessary authority... 5.6.Visitors are bound by their presence on the Organization’s site to comply with the safety regulations.

13. 13 5. Safety Procedures LHC project requires Site safety coordinators PGCSPS Overall Safety and Health Protection Plan Civil Engineering Work Equipment Installation PPSPS Plan Particulier de Securité et de la Protection de la Santé The PPSPS shall be filled out either by contractor or by collaborating institute

14. 14 5. Safety Procedures AOC (Notice of start of work) PPSPS Joint Inspection CERN works supervisor Contractors or Institutes (safety coordinator checks it) Safety Coordinator 30 days before 7 days before

15. 15 Safety Procedures : PPSPS or “Task Procedure”  Information related to staff Qualification First Aid skills Medical Aspects, etc.  Risks during the works Falling (person, material) Fire / Explosion Radiation Chemical producs Electricity (direct / in direct), etc. + The method of work must be described

16. 16 Safety Procedures : Joint Inspection  Works supervisor or local supervisor = person requesting the work (and in charge of it)  Safety Coordinator  Contractor’s (or institutes) representative (preferably person permanently present on site)  TSO  GLIMOS (if recommended) During the joint inspection, following people are present The Safety Coordinator launches the inspection

17. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 17 6.First Aid  Medical Service = 2 doctors, 3 nurses, 2 secretaries, 1 lab-assist. Infirmary, ground floor of bldg 5773802 Consultations (free of charge)74463 Vaccination for duty trips and against influenza Occupational-health visits on request73186 Analysis of work places73186

18. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 18 6.First Aid  In case of accident – “PAS” rule: P – Protect yourself, the victim, others A – Alert call 74444 give location S – Saveif the victim is conscious, reassure him/her if he/she is unconscious, turn on side in any case, get help ( know the first aides at your workplace )  After the accident, report to TSO, GLIMOS… (+ Code A2)

19. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 19 6.First Aid  Bleeding Lie the person down Apply direct pressure with cloth or tissue on the wound (excepts if an object in stuck in the wound ; do not remove it !) Reassure, get help  Falls If pins and needles appear in arms and legs, there is a possible back fracture  DO NOT MOVE THE VICTIM, call 74444  Burns Cool the burned area immediately with tepid running water (> 5 min) Cover with sterile bandage Call 74444 or go to the Infirmary (bldg 57)

20. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 20 7.Emergency means  Red telephones = direct liaison with fire brigade (They know where you are.)  From normal telephone, call 74444 (Your location is written on the telephone itself.)  From your private Natel, call +41 22 767 4444 (DO NOT CALL 112 !)

21. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 21 7.Emergency means  Emergency stop buttons (local or general)  Alarm buttons  Alarm signal  Fire brigade = 9 firemen with their equipment, available at all time, 24h/d, 365 d/y

22. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 22 8.In case of fire  If not too important, use portable fire extinguishers  In any case, call 74444  If it appears to be ‘important’ (= cannot be fought with the local extinguishers), activate the ‘evacuation signal’

23. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 23 9.In case of alarm/evacuation  If possible, secure your work place (stop power, close chemicals…)  Use the shortest way to exit  Go to the “assembly point”

24. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 24 10.Safety documents  General safety documents are available on the web : CERN Main Page  Safety  Documents  types of documents  PH Safety Plan http://safety-commission.web.cern.ch/safety-commission/SafetyPlan/ep/e_index.htm  Safety Guide for Experiments http://safetyguide.web.cern.ch/safetyguide/  Access and Safety Procedures for ALICE ALICE-INT-2004-008 + EDMS 452686

25. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 25 11.Causes of accidents at CERN Handling operation are the main cause of accidents Handling Cars Fall (same level) Falls (from height) Hand tools Others

26. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 26 II. General and Specific Risks at CERN, and in particular for ALICE  Road traffic  Industrial activities  Research activities  Underground activities

27. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 27 II. Risk review at CERN  Road traffic  Noise  ElectricityHV but also LV  Falls (“work at height”) and slips  Falling objects  Safety Perimeters  Handling (= transport, but also “hand-ling”, manipulations)  Fire risks (materials, electricity…)  Waste management  recycling

28. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 28 II. Risk review at CERN  Radiation ionizing and non-ionizing  Lasers  EM-fields  (Flammable) gases, Chemicals (liquids)  Toxic and flammable materials (solids)  Mechanical integrity (incl. seismic events, pressure vessels…)  Confined spaces

29. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 29 Risks on roads Traffic rules at CERN are the ones in force in the host states – the ones applicable for villages and cities. ( Safety Code A7 ) General speed limit = 50 km/h Forbidden to overpass

30. 30 How to recognize a noise hazard ?  Signs  High acoustical discomfort  Difficult to talk Wear protective equipment, Keep away – distance Keep away – time

31. 31 Manual Handling Spinal column and hand injuries ! ( good engineering = fewer manual handlings ) Use tools, not your body! + Protective equipments

32. 32 Falls, slips… Tidy and clean your work place and the floor around it.

33. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 33 Ergonomics  Make sure to have proper illumination of your workplace  Make sure that your chair is adapted to you and your position (height, back…)  Adopt a general healthy posture  Make sure that your computer screen is well positioned (perpendicular to the light source)  Do not sit too long without exercising (body and eyes)  In case of aching, consult the Medical Service

34. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 34 Electricity  Electrical hazards (electrocution, damage to property) are to be encountered almost everywhere.  Persons carrying out work on electrical installations must have the necessary qualifications.  Safety Code C1, "Electrical Safety Code", lays down the regulations concerning electrical construction work and for the installation and use of electrical equipment.  Safety Instruction IS 24, "Regulations applicable to Electrical Installations", specifies the standards in force on the CERN sites.  In practice : If you don’t know, don’t touch !

35. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 35 Fire  Safety Code E, "Fire Protection  Fires  activities creating "hot spots  "fire permit" - person requesting the work - TSO responsible for the area  The combustion of plastics containing halogens, sulphur or phosphorous releases corrosive gases that often cause more damage than the fire itself.  Safety Instructions IS 41 and IS 23  Know the location of the alarm systems and fire-fighting equipment in the vicinity of your workplace and know how to use them.

36. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 36 Transport, Lifting  Use as much as possible the official services for transportation of heavy materials and delicate equipment  “demande de transport interne” on EDH They have the know-how and an insurance.  The use of lifting equipment (cranes, forklifts…) requires training and qualification !

37. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 37 Handling, Manipulation  Think before acting !  Watch your hands !

38. 38  Read the Material Safety Data Sheet, MSDS  hazards, precautions, emergency procedures  Delimit the zone before work commences,  Ventilate the work place,  Wear the appropriate gloves as well as an apron and safety goggles.  Use the minimum amount of chemicals for the job.  Fire extinguisher, absorbent product (Hi-dri…) at hand.  Eye wash must be present at the work place.  Store (unused) chemicals in appropriate containers.  In case of doubt, contact SC/GC. Chemicals

39. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 39 Radiation in test beams  Safety Code F = Radiation Protection Manual  Working in “controlled areas” observe the information on the panels wear your CERN film badge organise your work as to minimise the exposure of personnel. never remove shielding, protections or locking systems report any anomalies to the person responsible for the equipment. Any material leaving an accelerator area may have been activated. It must therefore be checked by SC-RP.

40. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 40 Radiation from sources  Safety Code F = Radiation Protection Manual  Radioactive sources must be registered by SC-RP  Transport and shipping of sources must be organised by SC-RP http://service-rp-shipping.web.cern.ch/service-rp-shipping/  Wear your CERN film-badge whie working with sources  The SC-RP Group is responsible for the elimination of all radioactive waste.

41. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 41 Lasers To know more : http://service-laser-safety.web.cern.ch/service-laser-safety/ ClassHazardComments 1without dangerif view not intentional 1M, 2, 2Mretinal burnwithout danger if exposure < 0.25s 3Rretinal burndirect view is dangerous 3B retinal burn & other biological effects direct view dangerous and diffuse reflections could be dangerous 4 retinal burn & other biological effects & skin burn direct view and diffuse reflections are dangerous. Extreme care!

42. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 42 Lasers  Never point the beam to somebody  Never look along the beam axis  Don’t install beam axis in eye height laying (unconscious) ca. 0.1 m sitting ca. 1.2 m standing ca. 1.7 m  Wear safety glasses ( adapted to the wavelength ! )

43. 43 Magnetic Field Collision hazards & eddy currents Ferromagnetic objects may become dangerous projectiles Stainless steel might be magnetic, even if austenitic (when cold treated) Pacemaker and defillibrator - Attention

44. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 44 Ways to reduce the risks on the field :  Proper information ← Supervisors, GLIMOS, TIS  Proper training ← TIS, GLIMOS, HR-ED  Adequate preparation of work  Presence of safety team  Respect the rules  Respect safety signs … Safety culture = “think safety, work safely”

45. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 45 III. Specific Risks in UX-25 ( ALICE cavern )  The ones cited before : Noise ElectricityHV but also LV Handling = transport and manipulations Lasersdefine and respect safety perimeters EM-fieldsrestricted access during magnet tests Fire risks  materials, electricity… Hot works“Fire permits” on EDH (Flammable) gases, Chemicals (liquids) Mechanical integrity (incl. seismic events, pressure vessels…) Confined spaces(not yet)

46. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 46 III. Specific Risks in UX-25 ( ALICE cavern )  Overhead-crane in operation in the shaft  safety perimeter  Work at height ( scaffoldings, ladders, nacelles… )  Fire  smoke !  Waste management What do you need to access ? What do you have to know ? In case of emergency…

47. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 47 Work at height  Never work on a ladder !  Work on scaffoldings (mounted by trained people) Use safety equipment Use the stairs Define a safety perimeter around  “driving license” for nacelles (after proper training) Use safety equipment Define a safety perimeter around

48. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 48 What is needed for access ?  The access right ( get it on EDH after this training ) Never work with a visitor card !  Wear your access-card in a visible manner  Wear your hardhat  Wear comfortable shoes, even safety-shoes to work  Any safety equipment related to your work  Better to have your portable-phone  No self-breathing apparatus ; they are available at fixed places

49. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 49 What do you need to know ?  What is ongoing down there ; e.g. work has priority on visits !  Why do you go there ? Prepare your work/visit  Your way out  The location of personal safety equipment  The location of fire-fighting equipment  The location of Emergency-stop buttons  The alarm signal and the meeting point

50. Induction Safety Course for ALICE Collaborators - Marc TAVLET / GLIMOS 50 Way-out, safety equipment, safety perimeter, … Look at the maps : … but look at your surroundings !

51. 51 This is almost … The End Help us to reduce the frequency and severity of accidents; It is YOUR behavior which makes the difference ! Remember: it is forbidden to smoke and to eat in underground areas. (Drinking is allowed in non-radiation areas.) Now let’s go to Point-2…