1. Group 3 Proposal Ryan Boak Douglas Gobeski Justin King Michael Priebe Daniel Raphael Mark Rogers Becca Wahmhoff Bryan Witherspoon

2. Visual/Motion Ship Simulator Project sponsor is PI Engineering located in Williamston, MI Project sponsor is PI Engineering located in Williamston, MI Specializes in simulation Specializes in simulation Project involves putting together a tug boat simulator Project involves putting together a tug boat simulator Requires careful planning between software, electrical, and mechanical components Requires careful planning between software, electrical, and mechanical components Design Team: 2 CpEs, 2 EEs, 4 MEs Design Team: 2 CpEs, 2 EEs, 4 MEs

3. Simulation Software and Computer Computer mounted in the front of the simulator Computer mounted in the front of the simulator Use of the Virtual Sailor program Use of the Virtual Sailor program Simulates variety of conditionsSimulates variety of conditions Program uses input signals from throttles and wheel Program uses input signals from throttles and wheel Outputs to 5-10 gauges and platform Outputs to 5-10 gauges and platform 2 wave files generated, one for sound and one for outputs2 wave files generated, one for sound and one for outputs Picture taken from http://www.hangsim.com/vs/boats.php?dzone=ship.

4. Simulation Software Continued Input/Output interface with hardware will have to be designed Input/Output interface with hardware will have to be designed Developer provided an outputs objectDeveloper provided an outputs object Full capability is not built in with the softwareFull capability is not built in with the software Keyboard inputs will have to be replaced by simulator inputsKeyboard inputs will have to be replaced by simulator inputs Outputs will have to go to the microcontroller in real-timeOutputs will have to go to the microcontroller in real-time Picture taken from http://www.hangsim.com/vs/.

5. A Gauge for Success! Custom Built Gauges Custom Built Gauges Patent Pending Position Sensing Patent Pending Position Sensing Software Controlled Software Controlled Customizable Faces Customizable Faces Backlighting Backlighting Waterproof Waterproof

6. Which Way is North? Actual Soo River Belle Compass Actual Soo River Belle Compass Software Controlled Software Controlled Replacement Magnetic Field Replacement Magnetic Field Multiple Phase Position Sensing Multiple Phase Position Sensing

7. Steering Has to stand up to punishment Has to stand up to punishment 4 total revolutions 4 total revolutions Transmits position information with a potentiometer Transmits position information with a potentiometer Chain-driven hydraulic system to provide “stops” at extremes of rotation Chain-driven hydraulic system to provide “stops” at extremes of rotation Design/analysis focus on matching displacement volumes and gear ratios, and mechanical strength Design/analysis focus on matching displacement volumes and gear ratios, and mechanical strength Picture taken from http://crimsonring.com/Journal/wp-content/uploads/2006/05/Ships-Wheels-MED.jpg.

8. Motion Platform  The motion platform will be created by modifying an existing Quasi- Motion™ Servo Controlled Tipper Platform.  The platform will be extended to approximately 6’ x 8’.  The extension will most likely be raised about a foot over the original tipper with supports attaching to the corners of the platform.  The platform must be raised up far enough so that it doesn’t hit the floor during tipping.  A diagram of motion will be drawn up to show the range of motion of the tipping platform.

9. Design Considerations for the Motion Platform Pivot Point Pivot Point One of the main factors to affect the realism of motion.One of the main factors to affect the realism of motion. Should be as close to the actual C.G. of the ship as possible.Should be as close to the actual C.G. of the ship as possible. This will be limited by the size of the motion platform. This will be limited by the size of the motion platform. Balancing Masses Balancing Masses Since most of the weight will be in the front of the cabin, balancing masses will be provided in the rear.Since most of the weight will be in the front of the cabin, balancing masses will be provided in the rear.

10. Spacing of Bellows Spacing of Bellows Since the bellows have a finite strength with which to lift the cabin, they may need to be spaced further out.Since the bellows have a finite strength with which to lift the cabin, they may need to be spaced further out. This would require modification of the motion platform, and will be avoided if possible. This would require modification of the motion platform, and will be avoided if possible. Spaced bellows will be able to support more weight, but won’t be able to move the cabin as much.Spaced bellows will be able to support more weight, but won’t be able to move the cabin as much. Design Considerations for the Motion Platform

11. Pilot House Cabin Capacity: 1-2 people Capacity: 1-2 people Entirely enclosed Entirely enclosed Back entrance door Back entrance door Rectangular windows Rectangular windows Computer screens viewing window Computer screens viewing window Plywood, L- Brackets, Nuts & Bolts Plywood, L- Brackets, Nuts & Bolts Realistic & fun Realistic & fun

12. Conclusion Project sponsor is PI Engineering Simulator design requires communication across multiple disciplines Software, electrical, and mechanical components Design challenges Portability