1. Overview of Assembly Language Chapter 4 S. Dandamudi

2. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 2 Outline Assembly language statements Data allocation Where are the operands?  Addressing modes »Register »Immediate »Direct »Indirect Data transfer instructions  mov, xchg, and xlat  Ambiguous moves Overview of assembly language instructions  Arithmetic  Conditional  Iteration  Logical  Shift/Rotate Defining constants  EQU, %assign, %define Macros Illustrative examples Performance: When to use the xlat instruction

3. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 3 Assembly Language Statements Three different classes  Instructions »Tell CPU what to do »Executable instructions with an op-code  Directives (or pseudo-ops) »Provide information to assembler on various aspects of the assembly process »Non-executable –Do not generate machine language instructions  Macros »A shorthand notation for a group of statements »A sophisticated text substitution mechanism with parameters

4. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 4 Assembly Language Statements (cont’d) Assembly language statement format: [label] mnemonic [operands] [;comment]  Typically one statement per line  Fields in [ ] are optional  label serves two distinct purposes: »To label an instruction –Can transfer program execution to the labeled instruction »To label an identifier or constant  mnemonic identifies the operation (e.g. add, or )  operands specify the data required by the operation »Executable instructions can have zero to three operands

5. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 5 Assembly Language Statements (cont’d)  comments »Begin with a semicolon (;) and extend to the end of the line Examples repeat: inc [result] ; increment result CR EQU 0DH ; carriage return character White space can be used to improve readability repeat: inc [result] ; increment result

6. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 6 Data Allocation Variable declaration in a high-level language such as C char response int value float total double average_value specifies »Amount storage required (1 byte, 2 bytes, …) »Label to identify the storage allocated (response, value, …) »Interpretation of the bits stored (signed, floating point, …) –Bit pattern 1000 1101 1011 1001 is interpreted as   29,255 as a signed number  36,281 as an unsigned number

7. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 7 Data Allocation (cont’d) In assembly language, we use the define directive  Define directive can be used »To reserve storage space »To label the storage space »To initialize »But no interpretation is attached to the bits stored –Interpretation is up to the program code  Define directive goes into the.DATA part of the assembly language program Define directive format for initialized data [var-name] D? init-value [,init-value],...

8. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 8 Data Allocation (cont’d) Five define directives for initialized data DB Define Byte ;allocates 1 byte DW Define Word ;allocates 2 bytes DD Define Doubleword ;allocates 4 bytes DQ Define Quadword ;allocates 8 bytes DT Define Ten bytes ;allocates 10 bytes Examples sorted DB ’y’ value DW 25159 Total DD 542803535 float1 DD 1.234

9. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 9 Data Allocation (cont’d) Directives for uninitialized data Five reserve directives RESB Reserve a Byte ;allocates 1 byte RESW Reserve a Word ;allocates 2 bytes RESD Reserve a Doubleword ;allocates 4 bytes RESQ Reserve a Quadword ;allocates 8 bytes REST Reserve a Ten bytes ;allocates 10 bytes Examples response resb 1 buffer resw 100 Total resd 1

10. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 10 Data Allocation (cont’d) Multiple definitions can be abbreviated Example message DB ’B’ DB ’y’ DB ’e’ DB 0DH DB 0AH can be written as message DB ’B’,’y’,’e’,0DH,0AH More compactly as message DB ’Bye’,0DH,0AH

11. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 11 Data Allocation (cont’d) Multiple definitions can be cumbersome to initialize data structures such as arrays Example To declare and initialize an integer array of 8 elements marks DW 0,0,0,0,0,0,0,0 What if we want to declare and initialize to zero an array of 200 elements?  There is a better way of doing this than repeating zero 200 times in the above statement »Assembler provides a directive to do this (DUP directive)

12. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 12 Data Allocation (cont’d) Multiple initializations  The TIMES assembler directive allows multiple initializations to the same value  Examples »Previous marks array marks DW 0,0,0,0,0,0,0,0 can be compactly declared as marks TIMES 8 DW 0

13. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 13 Data Allocation (cont’d) Symbol Table  Assembler builds a symbol table so we can refer to the allocated storage space by the associated label Example.DATA name offset value DW 0value 0 sum DD 0sum 2 marks DW 10 DUP (?)marks 6 message DB ‘The grade is:’,0message 26 char1 DB ?char1 40

14. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 14 Data Allocation (cont’d) Correspondence to C Data Types DirectiveC data type DBchar DWint, unsigned DDfloat, long DQdouble DTinternal intermediate float value

15. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 15 Where Are the Operands? Operands required by an operation can be specified in a variety of ways A few basic ways are:  operand is in a register –register addressing mode  operand is in the instruction itself –immediate addressing mode  operand is in the memory –variety of addressing modes  direct and indirect addressing modes  operand is at an I/O port

16. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 16 Where Are the Operands? (cont’d) Register Addressing Mode  Most efficient way of specifying an operand »operand is in an internal register Examples mov EAX,EBX mov BX,CX  The mov instruction mov destination,source copies data from source to destination

17. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 17 Where Are the Operands? (cont’d) Immediate Addressing Mode  Data is part of the instruction »operand is located in the code segment along with the instruction »Efficient as no separate operand fetch is needed »Typically used to specify a constant Example mov AL,75  This instruction uses register addressing mode for specifying the destination and immediate addressing mode to specify the source

18. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 18 Where Are the Operands? (cont’d) Direct Addressing Mode  Data is in the data segment »Need a logical address to access data –Two components: segment:offset »Various addressing modes to specify the offset component –offset part is referred to as the effective address  The offset is specified directly as part of the instruction  We write assembly language programs using memory labels (e.g., declared using DB, DW,...) »Assembler computes the offset value for the label –Uses symbol table to compute the offset of a label

19. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 19 Where Are the Operands? (cont’d) Direct Addressing Mode (cont’d) Examples mov AL,[response] »Assembler replaces response by its effective address (i.e., its offset value from the symbol table) mov [table1],56 »table1 is declared as table1 TIMES 20 DW 0 »Since the assembler replaces table1 by its effective address, this instruction refers to the first element of table1 –In C, it is equivalent to table1[0] = 56

20. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 20 Where Are the Operands? (cont’d) Direct Addressing Mode (cont’d) Problem with direct addressing  Useful only to specify simple variables  Causes serious problems in addressing data types such as arrays »As an example, consider adding elements of an array –Direct addressing does not facilitate using a loop structure to iterate through the array –We have to write an instruction to add each element of the array Indirect addressing mode remedies this problem

21. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 21 Where Are the Operands? (cont’d) Indirect Addressing Mode The offset is specified indirectly via a register  Sometimes called register indirect addressing mode  For 16-bit addressing, the offset value can be in one of the three registers: BX, SI, or DI  For 32-bit addressing, all 32-bit registers can be used Example mov AX,[EBX]  Square brackets [ ] are used to indicate that EBX is holding an offset value »EBX contains a pointer to the operand, not the operand itself

22. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 22 Where Are the Operands? (cont’d) Using indirect addressing mode, we can process arrays using loops Example: Summing array elements  Load the starting address (i.e., offset) of the array into EBX  Loop for each element in the array »Get the value using the offset in EBX –Use indirect addressing »Add the value to the running total »Update the offset in EBX to point to the next element of the array

23. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 23 Where Are the Operands? (cont’d) Loading offset value into a register Suppose we want to load EBX with the offset value of table1 We can simply write mov EBX,table1  It resolves offset at the assembly time Another way of loading offset value »Using the lea instruction –This is a processor instruction –Resolves offset at run time

24. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 24 Where Are the Operands? (cont’d) Loading offset value into a register Using lea (load effective address) instruction  The format of lea instruction is lea register,source  The previous example can be written as lea EBX,[table1]  May have to use lea in some instances »When the needed data is available at run time only –An index passed as a parameter to a procedure »We can write lea EBX,[table1+ESI] to load EBX with the address of an element of table1 whose index is in the ESI register –We cannot use the mov instruction to do this

25. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 25 Data Transfer Instructions We will look at three instructions  mov (move) »Actually copy  xchg (exchange) »Exchanges two operands  xlat (translate) »Translates byte values using a translation table Other data transfer instructions such as  movsx (move sign extended)  movzx (move zero extended) are discussed in Chapter 7

26. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 26 Data Transfer Instructions (cont’d) The mov instruction  The format is mov destination,source »Copies the value from source to destination »source is not altered as a result of copying »Both operands should be of same size »source and destination cannot both be in memory –Most Pentium instructions do not allow both operands to be located in memory –Pentium provides special instructions to facilitate memory-to-memory block copying of data

27. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 27 Data Transfer Instructions (cont’d) The mov instruction  Five types of operand combinations are allowed: Instruction type Example mov register,register mov DX,CX mov register,immediate mov BL,100 mov register,memory mov EBX,[count] mov memory,register mov [count],ESI mov memory,immediate mov [count],23  The operand combinations are valid for all instructions that require two operands

28. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 28 Data Transfer Instructions (cont’d) Ambiguous moves: PTR directive For the following data definitions.DATA table1 TIMES 20 DW 0 status TIMES 7 DB 1 the last two mov instructions are ambiguous mov EBX, table1 mov ESI, status mov [EBX],100 mov [ESI],100  Not clear whether the assembler should use byte or word equivalent of 100

29. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 29 Data Transfer Instructions (cont’d) Ambiguous moves: PTR directive A type specifier can be used to clarify The last two mov instructions can be written as mov WORD [EBX],100 mov BYTE [ESI],100  WORD and BYTE are called type specifiers We can also write these statements as mov [EBX], WORD 100 mov [ESI], BYTE 100

30. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 30 Data Transfer Instructions (cont’d) Ambiguous moves: PTR directive We can use the following type specifiers: Type specifierBytes addressed BYTE1 WORD 2 DWORD4 QWORD 8 TWORD10

31. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 31 Data Transfer Instructions (cont’d) The xchg instruction The syntax is xchg operand1,operand2 Exchanges the values of operand1 and operand2 Examples xchg EAX,EDX xchg [response],CL xchg [total],DX Without the xchg instruction, we need a temporary register to exchange values using only the mov instruction

32. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 32 Data Transfer Instructions (cont’d) The xchg instruction The xchg instruction is useful for conversion of 16-bit data between little endian and big endian forms  Example: mov AL,AH converts the data in AX into the other endian form Pentium provides bswap instruction to do similar conversion on 32-bit data bswap 32-bit register  bswap works only on data located in a 32-bit register

33. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 33 Data Transfer Instructions (cont’d) The xlat instruction The xlat instruction translates bytes The format is xlatb To use xlat instruction »EBX should be loaded with the starting address of the translation table »AL must contain an index in to the table –Index value starts at zero »The instruction reads the byte at this index in the translation table and stores this value in AL –The index value in AL is lost »Translation table can have at most 256 entries (due to AL)

34. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 34 Data Transfer Instructions (cont’d) The xlat instruction Example: Encrypting digits Input digits: 0 1 2 3 4 5 6 7 8 9 Encrypted digits: 4 6 9 5 0 3 1 8 7 2.DATA xlat_table DB ’4695031872’....CODE mov EBX, xlat_table GetCh AL sub AL,’0’ ; converts input character to index xlatb ; AL = encrypted digit character PutCh AL...

35. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 35 Overview of Assembly Instructions Pentium provides several types of instructions Brief overview of some basic instructions:  Arithmetic instructions  Jump instructions  Loop instruction  Logical instructions  Shift instructions  Rotate instructions These sample instructions allows you to write reasonable assembly language programs

36. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 36 Overview of Assembly Instructions (cont’d) Arithmetic Instructions INC and DEC instructions  Format: inc destination dec destination  Semantics: destination = destination +/- 1 »destination can be 8-, 16-, or 32-bit operand, in memory or register  No immediate operand Examples inc BX ; BX = BX+1 dec [value[ ; value = value-1

37. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 37 Overview of Assembly Instructions (cont’d) Arithmetic Instructions ADD instruction  Format: add destination,source  Semantics: destination = (destination)+(source) Examples add EBX,EAX add [value],10H  inc EAX is better than add EAX,1 –inc takes less space –Both execute at about the same speed

38. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 38 Overview of Assembly Instructions (cont’d) Arithmetic Instructions SUB instruction  Format: sub destination,source  Semantics: destination := (destination)-(source) Examples sub EBX,EAX sub [value],10H  dec EAX is better than sub EAX,1 –dec takes less space –Both execute at about the same speed

39. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 39 Overview of Assembly Instructions (cont’d) Arithmetic Instructions CMP instruction  Format: cmp destination,source  Semantics: (destination)-(source)  destination and source are not altered  Useful to test relationship (>, =) between two operands  Used in conjunction with conditional jump instructions for decision making purposes Examples cmp EBX,EAX cmp [count],100

40. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 40 Overview of Assembly Instructions (cont’d) Jump Instructions Unconditional Jump  Format: jmp label  Semantics: »Execution is transferred to the instruction identified by label Examples: Infinite loop mov EAX,1 inc_again: inc EAX jmp inc_again mov EBX,EAX ; never executes this

41. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 41 Overview of Assembly Instructions (cont’d) Jump Instructions Conditional Jump  Format: j label  Semantics: »Execution is transferred to the instruction identified by label only if is met Examples: Testing for carriage return GetCh AL cmp AL,0DH ; 0DH = ASCII carriage return je CR_received inc CL... CR_received:

42. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 42 Overview of Assembly Instructions (cont’d) Jump Instructions Conditional Jump  Some conditional jump instructions –Treats operands of the CMP instruction as signed numbers jejump if equal jgjump if greater jljump if less jgejump if greater or equal jlejump if less or equal jnejump if not equal

43. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 43 Overview of Assembly Instructions (cont’d) Jump Instructions Conditional Jump  Conditional jump instructions can also test values of the individual flags jzjump if zero (i.e., if ZF = 1) jnzjump if not zero (i.e., if ZF = 0) jcjump if carry (i.e., if CF = 1) jncjump if not carry (i.e., if CF = 0)  jz is synonymous for je  jnz is synonymous for jne

44. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 44 Overview of Assembly Instructions (cont’d) Loop Instruction LOOP Instruction  Format: loop target  Semantics: »Decrements ECX and jumps to target if ECX  0 –ECX should be loaded with a loop count value Example: Executes loop body 50 times mov ECX,50 repeat: loop repeat...

45. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 45 Overview of Assembly Instructions (cont’d) Loop Instruction The previous example is equivalent to mov ECX,50 repeat: dec ECX jnz repeat...  Surprisingly, dec ECX jnz repeat executes faster than loop repeat

46. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 46 Overview of Assembly Instructions (cont’d) Logical Instructions  Format: and destination,source or destination,source xor destination,source not destination  Semantics: »Performs the standard bitwise logical operations –result goes to destination  TEST is a non-destructive AND instruction test destination,source  Performs logical AND but the result is not stored in destination (like the CMP instruction)

47. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 47 Overview of Assembly Instructions (cont’d) Logical Instructions Example: Testing the value in AL for odd/even number test AL,01H ; test the least significant bit je even_number odd_number: jmp skip1 even_number: skip1:...

48. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 48 Overview of Assembly Instructions (cont’d) Shift Instructions  Format: Shift left shl destination,count shl destination,CL Shift right shr destination,count shr destination,CL  Semantics: »Performs left/right shift of destination by the value in count or CL register – CL register contents are not altered

49. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 49 Overview of Assembly Instructions (cont’d) Shift Instructions Bit shifted out goes into the carry flag »Zero bit is shifted in at the other end

50. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 50 Overview of Assembly Instructions (cont’d) Shift Instructions  count is an immediate value shl AX,5  Specification of count greater than 31 is not allowed »If a greater value is specified, only the least significant 5 bits are used  CL version is useful if shift count is known at run time » E.g. when the shift count value is passed as a parameter in a procedure call »Only the CL register can be used  Shift count value should be loaded into CL mov CL,5 shl AX,CL

51. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 51 Overview of Assembly Instructions (cont’d) Rotate Instructions  Two types of ROTATE instructions  Rotate without carry »rol (ROtate Left) »ror (ROtate Right)  Rotate with carry »rcl (Rotate through Carry Left) »rcr (Rotate through Carry Right)  Format of ROTATE instructions is similar to the SHIFT instructions »Supports two versions –Immediate count value –Count value in CL register

52. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 52 Overview of Assembly Instructions (cont’d) Rotate Instructions  Rotate without carry

53. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 53 Overview of Assembly Instructions (cont’d) Rotate Instructions  Rotate with carry

54. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 54 Defining Constants NASM provides three directives:  EQU directive »No reassignment »Only numeric constants are allowed  %assign directive »Allows redefinition »Only numeric constants are allowed  %define directive »Allows redefinition »Can be used for both numeric and string constants

55. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 55 Defining Constants Defining constants has two main advantages  Improves program readability NUM_OF_STUDENTS EQU 90.... mov ECX,NUM_OF_STUDENTS is more readable than mov ECX,90  Helps in software maintenance »Multiple occurrences can be changed from a single place Convention  We use all upper-case letters for names of constants

56. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 56 Defining Constants The EQU directive Syntax: name EQU expression  Assigns the result of expression to name  The expression is evaluated at assembly time Examples NUM_OF_ROWS EQU 50 NUM_OF_COLS EQU 10 ARRAY_SIZE EQU NUM_OF_ROWS * NUM_OF_COLS

57. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 57 Defining Constants The %assign directive Syntax: %assign name expression  Similar to EQU directive  A key difference »Redefinition is allowed %assign i j+1... %assign i j+2 is valid »Case-sensitive »Use %iassign for case-insensitive definition

58. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 58 Defining Constants The %define directive Syntax: %define name constant  Both numeric and strig constants can be defined  Redefinition is allowed %define X1 [EBP+4]... %assign X1 [EBP+20] is valid »Case-sensitive »Use %idefine for case-insensitive definition

59. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 59 Macros Macros are defined using %macro and %endmacro directives Typical macro definition %macro macro_name para_count %endmacro Example 1: A parameterless macro %macro multEAX_by_16 sal EAX,4 %endmacro Specifies number of parameters

60. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 60 Macros (cont’d) Example 2: A parameterized macro %macro mult_by_16 1 sal %1,4 %endmacro Example 3: Memory-to-memory data transfer %macro mxchg 2 xchg EAX,%1 xchg EAX,%2 xchg EAX,%1 %endmacro one parameter two parameters

61. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 61 Illustrative Examples Five examples are presented:  Conversion of ASCII to binary representation (BINCHAR.ASM)  Conversion of ASCII to hexadecimal by character manipulation (HEX1CHAR.ASM)  Conversion of ASCII to hexadecimal using the XLAT instruction (HEX2CHAR.ASM)  Conversion of lowercase letters to uppercase by character manipulation (TOUPPER.ASM)  Sum of individual digits of a number (ADDIGITS.ASM)

62. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 62 Performance: When to Use XLAT Lowercase to uppercase conversion –XLAT is bad for this application with XLAT without XLAT

63. 2005 To be used with S. Dandamudi, “Introduction to Assembly Language Programming,” Second Edition, Springer, 2005.  S. Dandamudi Chapter 4: Page 63 Performance: When to Use XLAT (cont’d) Hex conversion –XLAT is better for this application with XLAT without XLAT Last slide