2. Command: 3darray  Select objects:  1 found Select objects:  Enter the type of array [Rectangular/Polar] :p  Enter the number of items in the array: 3  Specify the angle to fill (+=ccw, -=cw) :  Rotate arrayed objects? [Yes/No] :  Specify center point of array: 0,0  Specify second point on axis of rotation: 0,0,20  Command: hi  HIDE Regenerating model.

3. Command: rotate3d  Current positive angle: ANGDIR=counterclockwise ANGBASE=0 Select objects:  1 found Select objects:  Specify first point on axis or define axis by [Object/Last/View/Xaxis/Yaxis/Zaxis/2points]: y  Specify a point on the Y axis :  Specify rotation angle or [Reference]: -150  Command: hi  HIDE Regenerating model.

4. Command: mirror3d  Select objects:  1 found Select objects:  Specify first point of mirror plane (3 points) or [Object/Last/Zaxis/View/XY/YZ/ZX/3points] : zx  Specify point on ZX plane :  Delete source objects? [Yes/No] :  Command: hi  HIDE Regenerating model.

7. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 4  Regenerating model.

10. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : SI  Regenerating model.

11. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : H  Regenerating model.

13. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : V  Regenerating model.

15. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : A  Regenerating model.

17. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : B  Regenerating model.

19. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : L  Regenerating model.

21. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 3  Enter a configuration option [Horizontal/Vertical/Above/Below/Left/Right] : R  Regenerating model.

23. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 2  Enter a configuration option [Horizontal/Vertical] :  Regenerating model.

25. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : 2  Enter a configuration option [Horizontal/Vertical] : H  Regenerating model.

29. Command: limits  Reset Model space limits: Specify lower left corner or [ON/OFF] :  Specify upper right corner : 120,80  Command: m  MOVE Select objects: 1 found Select objects:  Specify base point or displacement: 40,40  Specify second point of displacement or : 40,80 

31. Command: ti  TILEMODE Enter new value for TILEMODE : 0  Regenerating layout. Command: limits  Reset Paper space limits: Specify lower left corner or [ON/OFF] :  Specify upper right corner : 210,297  Command: Z  ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window] : A  Regenerating layout. Command: mview  Specify corner of viewport or [ON/OFF/Fit/Hideplot/Lock/Object/Polygonal/Restore/2/3/4] : R  Enter viewport configuration name or [?] :  Specify first corner or [Fit] : 20,10  Specify opposite corner: 200,287  Regenerating model.

32. Command: mspace  Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: N  Enter name(s) of new layers frozen in all viewports: corp,sectiune,hasuri,axe-princ,axe-sus, axe-st  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: 

33. Command: ti  TILEMODE Enter new value for TILEMODE : 1  Regenerating model. Command: -vports  Enter an option [Save/Restore/Delete/Join/SIngle/?/2/3/4] : SI  Regenerating model.

34. Command: change  Select objects: 40,0  1 found Select objects:  Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA  Enter new layer name : corp  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: 

36. Command: section  Select objects: 40,40  1 found Select objects:  Specify first point on Section plane by [Object/Zaxis/View/XY/YZ/ZX/3points] : ZX  Specify a point on the ZX-plane : 0,60  Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF  Enter name list of layer(s) to turn off: corp  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

38. Command: ucs  Current ucs name: *WORLD* Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World] : N  Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] : OB  Select object to align UCS: 0,60 

39. Command: change  Select objects: 0,0  1 found Select objects: Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA  Enter new layer name : sectiune  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:  Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW  Enter lineweight (0.0mm - 2.11mm): 0.8  Enter name list of layers(s) for lineweight 0.80mm : sectiune  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S Enter layer name to make current : sectiune  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

41. Command: -layer  Current layer: "sectiune" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S  Enter layer name to make current : hasuri  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

42. Command: -bhatch  Current hatch pattern: ANGLE Specify internal point or [Properties/Select/Remove islands/Advanced]: P  Enter a pattern name or [?/Solid/User defined] : ansi31  Specify a scale for the pattern : 0.5  Specify an angle for the pattern :  Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 4,3  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 8,25  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 6,55  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 5,76  Analyzing internal islands... Current hatch pattern: ANSI31 Specify internal point or [Properties/Select/Remove islands/Advanced]: 

44. Command: -layer  Current layer: "hasuri" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S  Enter layer name to make current : axe-princ  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

45. Command: ti  TILEMODE Enter new value for TILEMODE : 0  Regenerating layout. Regenerating model.

46. Command: -layer  Current layer: "axe-princ" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: S  Enter layer name to make current : 0  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:  Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T  Enter layer name(s) to thaw: sectiune,hasuri,axe-princ  Enter an option [All/Select/Current] :  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Regenerating layout. Regenerating model. Command: vpoint  Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000 Specify a view point or [Rotate] : 0,-1,0  Regenerating model. Grid too dense to display

47. Command: z  ZOOM Specify corner of window, enter a scale factor (nX or nXP), or [All/Center/Dynamic/Extents/Previous/Scale/Window] : S  Enter a scale factor (nX or nXP): 1XP  Grid too dense to display

49. Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T  Enter layer name(s) to thaw: corp  Enter an option [All/Select/Current] : Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Regenerating layout. Regenerating model. Grid too dense to display Command: vpoint  Current view direction: VIEWDIR=-1.2000,-1.0000,1.0000 Specify a view point or [Rotate] : 0,0,1  Regenerating model.

51. Command: _solprof  Select objects: 40,40  1 found Select objects:  Display hidden profile lines on separate layer? [Yes/No] :  Project profile lines onto a plane? [Yes/No] :  Delete tangential edges? [Yes/No] :  One solid selected. Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F  Enter layer name(s) to freeze: corp  Enter an option [All/Select/Current] : Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Command: vpoint  Current view direction: VIEWDIR=0.0000,0.0000,1.0000 Specify a view point or [Rotate] : -1,-1,1  Regenerating model.

54. Command:  Grid too dense to display vplayer Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: T  Enter layer name(s) to thaw: corp  Enter an option [All/Select/Current] : Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]:  Regenerating layout. Regenerating model. Grid too dense to display

55. Command: vpoint  Current view direction: VIEWDIR=-1.2000,- 1.0000,1.0000  Specify a view point or [Rotate] : -1,0,0  Regenerating model. Grid too dense to display

56. Command: _solprof  Select objects: 40,40  1 found Select objects:  Display hidden profile lines on separate layer? [Yes/No] :  Project profile lines onto a plane? [Yes/No] :  Delete tangential edges? [Yes/No] :  One solid selected. Command: vplayer  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: F  Enter layer name(s) to freeze: corp  Enter an option [All/Select/Current] :  Enter an option [?/Freeze/Thaw/Reset/Newfrz/Vpvisdflt]: 

58. Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: ?  Enter layer name(s) to list :  Layer name State Color Linetype Lineweight ------------------ ----------- ------------- ------------ ------------ "0" on -P 7 (white) "Continuous" Default "axe" on -P 7 (white) "CENTER2" Default "axe-princ" on -P 7 (white) "CENTER2" Default "axe-st" on -P 7 (white) "CENTER2" Default "axe-sus" on -P 7 (white) "CENTER2" Default "corp" on -P 7 (white) "Continuous" Default "cote" on -P 7 (white) "Continuous" Default "Defpoints" on 7 (white) "Continuous" Default "f-inv" on -P 7 (white) "DASHED2" 0.350 mm. "f-viz" on -P 7 (white) "Continuous" 0.500 mm. "hasuri" on -P 7 (white) "Continuous" Default "l-s-viz" on -P 7 (white) "Continuous" Default

59. "PH-36E" on -P 7 (white) "Continuous" Default "PH-370" on -P 7 (white) "Continuous" Default "PV-36E" on -P 7 (white) "Continuous" Default "PV-370" on -P 7 (white) "Continuous" Default "sectiune" on -P 7 (white) "Continuous" 0.800 mm. Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: LW  Enter lineweight (0.0mm - 2.11mm): 0.8  Enter name list of layers(s) for lineweight 0.80mm : PV-36E,PV-370  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: L  Enter loaded linetype name or [?] : dashed2  Enter name list of layer(s) for linetype "dashed2" : PH-36E,PH-370  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:  Regenerating layout. Regenerating model. Grid too dense to display

60. Command: pspace

61. Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: N  Enter name list for new layer(s): fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]: C  Enter color name or number (1-255): blue  Enter name list of layer(s) for color 5 (blue) : fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/LWeight/Plot/Freeze/Thaw/LOck/Unlock]:  Command: change Select objects: 70,287 1 found Select objects: 140,287 1 found, 2 total Select objects: 70,10 1 found, 3 total Select objects: 140,10 1 found, 4 total Select objects: Specify change point or [Properties]: p Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: la Enter new layer name : fer Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:

62. Command: change  Select objects: 70,287  1 found Select objects: 140,287  1 found, 2 total Select objects: 70,10  1 found, 3 total Select objects: 140,10  1 found, 4 total Select objects:  Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LA  Enter new layer name : fer  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: 

63. Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,20  Specify opposite corner: 210,0  2 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement: 0,30  Command: e  ERASE Select objects: 140,40  1 found Select objects: 

64. Command: m  MOVE Select objects: 70,40  1 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement or : 0,-10 

65. Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,143  Specify opposite corner: 125,115  1 found Select objects:  Specify base point or displacement: 0,145  Specify second point of displacement: 0,115 

66. Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,297  Specify opposite corner: 210,260  2 found Select objects:  Specify base point or displacement: 0,297  Specify second point of displacement: 0,267 

67. Command: stretch  Select objects to stretch by crossing-window or crossing-polygon... Select objects: c  Specify first corner: 0,180  Specify opposite corner: 210,130  2 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement: 0,30 

68. Command: m  MOVE Select objects: W  Specify first corner: 0,270  Specify opposite corner: 210,160  3 found Select objects:  Specify base point or displacement: 0,270  Specify second point of displacement or : 0,250  Command:  MOVE Select objects: 20,50  1 found Select objects:  Specify base point or displacement: 0,50  Specify second point of displacement or : 0,70 

69. Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF  Enter name list of layer(s) to turn off: fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

71. Command: m  MOVE Select objects: c  Specify first corner: 55,30  Specify opposite corner: 180,220  2 found Select objects:  Specify base point or displacement: 0,0  Specify second point of displacement or : 10,0 

72. Command: -layer  Current layer: "0" Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: OFF  Enter name list of layer(s) to turn off: hasuri,fer  Enter an option [?/Make/Set/New/ON/OFF/Color/Ltype/ LWeight/Plot/Freeze/Thaw/LOck/Unlock]: 

75. Command: l  LINE Specify first point: 40,130  Specify next point or [Undo]: @5,0  Specify next point or [Undo]:  Command: change  Select objects: 42,130  1 found Select objects:  Specify change point or [Properties]: P  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]: LW  Enter new lineweight : 1  Enter property to change [Color/Elev/LAyer/LType/ltScale/LWeight/Thickness]:  Command: _leader  Specify leader start point: 42.5,130  Specify next point: @0,-7  Specify next point or [Annotation/Format/Undo] :  Enter first line of annotation text or :  Enter an annotation option [Tolerance/Copy/Block/None/Mtext] : N 

77. Command: explode  Select objects: c  Specify first corner: 35,128  Specify opposite corner: 50,120  1 found Select objects:  Command: scale Select objects: c Specify first corner: 35,128 Specify opposite corner: 50,120 2 found Select objects: Specify base point: 42.5,130 Specify scale factor or [Reference]: 1.5

78. Command: -block  Enter block name or [?]: estsh  Specify insertion base point: 45,130  Select objects: W  Specify first corner: 35,132  Specify opposite corner: 50,120  3 found Select objects:  Command: ucs  Current ucs name: *WORLD* Enter an option [New/Move/orthoGraphic/Prev/Restore/Save/Del/Apply/?/World] : N  Specify origin of new UCS or [ZAxis/3point/OBject/Face/View/X/Y/Z] : 42.5,130  Grid too dense to display Command: ucsicon  Enter an option [ON/OFF/All/Noorigin/ORigin] : OR 

80. Command: -attdef  Current attribute modes: Invisible=N Constant=N Verify=N Preset=N Enter an option to change [Invisible/Constant/Verify/Preset] :  Enter attribute tag name: ts  Enter attribute prompt: Majuscula  Enter default attribute value: A  Current text style: "a508" Text height: 5.0000 Specify start point of text or [Justify/Style]: -8,-8  Specify rotation angle of text :  Command: -block  Enter block name or [?]: esh  Specify insertion base point: 2.5,0  Select objects: w  Specify first corner: -10,10  Specify opposite corner: 10,-15  4 found Select objects: 

81. Command: -insert  Enter block name or [?] : esh  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]:  Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle :  Enter attribute values Majuscula : A 

85. Command: -insert  Enter block name or [?] : rug  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: _nea to Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle :  Command: -insert  Enter block name or [?] :  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle : 90  Enter attribute values Rugozitatea : Ra3,2 

86. Command: -insert  Enter block name or [?] :  Specify insertion point or [Scale/X/Y/Z/Rotate/PScale/PX/PY/PZ/PRotate]: nea to Enter X scale factor, specify opposite corner, or [Corner/XYZ] :  Enter Y scale factor :  Specify rotation angle : 180  Enter attribute values Rugozitatea : Ra12,5 

87. Command: -attedit  Edit attributes one at a time? [Yes/No] :  Enter block name specification :  Enter attribute tag specification :  Enter attribute value specification :  Select Attributes: 1 found Select Attributes:  1 attributes selected. Enter an option [Value/Position/Height/ Angle/Style/Layer/Color/Next] : A  Specify new rotation angle : 0  Enter an option [Value/Position/Height/ Angle/Style/Layer/Color/Next] : P  Specify new text insertion point : @-10,-5  Enter an option [Value/Position/Height/ Angle/Style/Layer/Color/Next] : 