1. Longboards Mark H.

2. Drop Decks Most Expensive Fast Easy curving Easy to balance Good for downhill riding

3. Cruiser Cheapest Harder to turn Harder to balance Good for street riding Good for sharp turns

4. Pin Tail Similar to the Cruiser Cheapest Hard to balance Good for flat paths

5. Process 1.Cut wood to size 2.Cut out design 3.Steam the wood for an hour so the wood can bend 4.After steaming put in mold instantly 5.Leave in mold for 8 hours 6.Glue the 4 layers together and place back in the mold for 8 hours 7.Sand the whole board 8.Paint, grip tape, install trucks and wheel