1. A General-Purpose Platform for 3-D Reconstruction from Sequence of Images Ahmed Eid, Sherif Rashad, and Aly Farag Computer Vision and Image Processing Lab Department of Electrical and Computer Engineering Speed Scientific School University of Louisville URL: www.cvip.louisville.edu

2. The purpose of this project is two folds: 1- Propose a vision platform that lend itself for acquisition of calibrated sequence of images, and concurrently obtain a direct 3D reconstruction by laser scanning. 2- Implement the stereo- and space-carving based approaches for 3D reconstructions on a sequence of calibrated images. These reconstructions will be evaluated against the 3D scanning generated from a laser scanner. Abstract

3. The proposed system consists of a laser scanner (Cyberware, Inc, California), on which one or more optical cameras be mounted. The laser scanner generates a 3-D scan of an object by rotating 360 deg. The shaft over which the scanner head is mounted can be controlled in terms of speed and angle of rotation. System Setup

4. The field of view of the camera(s) is set to cover the same size of objects as the laser scanner. A sequence of referenced images can be acquired by a calibrated camera(s), mounted on the shaft. Hence, by the this setup we generate a sequence of images {I1, I2,... In} which we use in subsequent studies on object reconstruction Motion Mechanism

5. Find points in two or more input images that correspond to the same point in the scene. Use knowledge of the camera locations and triangulation to determine the depth of the scene point. One of the main problems of stereo is the correspondence problem. To solve this problem, a large number of stereo techniques rely heavily on assumptions such as the existence of specific features in the images to produce satisfactory results (I) 3-D Reconstruction Using Stereo Techniques

6. X CLCL CRCR eLeL eReR xLxL xRxR Epipolar plan Center of left camera Center of right camera 3d point x L, x R = two corresponding points Left image plan e L, e R = Left and right epipols A right epipolar line A left epipolar line Epipolar Geometry of Traditional Stereo

7. (II) 3-D Reconstruction Using Space Carving Step1: Initialize the volume V. Step2: Determine the set of voxels Vis(V) on the surface of V. Project each voxel v on Vis(V) to different images where v is visible. Determine the photo_consistency of each voxel v on Vis(V). Step3 If photo_consistent detain the voxel If photo_inconsistent carve the voxel Photo_inconsistent Photo_consistent

8. (III) 3-D Laser Scanner The 3-D scanner used in the proposed system is the Cyberware 3030. Its dynamic Range accommodates varying lighting conditions and surface properties. In operation, the 3030 shines a safe, low-intensity laser on an object to create a lighted profile. A high-quality video sensor captures this profile from two viewpoints. The system can digitize thousands of these profiles in a few seconds to capture the shape of the entire object. Simultaneously, a second video sensor in the scanner acquires color information.

9. Cyclograph Generation m-cyclograph images (n x k)  x y  =0  =5  =360 I1 I2 Ik I1 k-Input images (n x m) One Cyclograph image C1 C2 Cm x-y-  Volume of input images 1 2 3 xo x (IV) Panoramic Stereo

10. m-cyclograph images=m/2-cyclograph pairs L2 L1 R2 xo R1 Rm/2Lm/2 1 2 m/2 The two views of each pair should be overlapped to construct a cyclograph stereo pair. Formation of Stereo cyclograph pairs

11. A Cyclograph Pair

12. Scanner Space Carving Stereo Results: 3D Reconstruction

13. Scanner Space Carving Scanner Stereo Results: 3D Registration

14. Reconstruction With Errors Integration With Space Carving Results: Integration

15. Input Images

16. Complete Model Scanner Space Carving